• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1061-1062
• /
• 2006

This paper presents a new approach for analyzing the microstructure of $SiC_p$-reinforced aluminum matrix composites from digital images. Various samples of aluminum matrix composite were fabricated by hot pressing the powder mixtures with certain volume and size combinations of pure Al and SiC particles. Microstructures of the samples were analyzed by computer-based image processing methods. Since the conventional methods are not suitable for separating phases of such complex microstructures, some new algorithms have been developed for the improved recognition and characterization of the particles in the metal matrix composites.

• Korean Journal of Mathematics
• /
• 제31권2호
• /
• pp.145-152
• /
• 2023

Let $P(z):=\sum\limits^{n}_{j=0}A_jz^j$, A_j ∈ ℂ^m×m, 0 ≤ j ≤ n be a matrix polynomial of degree n, such that A_n ≥ A_n-1 ≥ . . . ≥ A₀ ≥ 0, A_n > 0. Then the eigenvalues of P(z) lie in the closed unit disk. This theorem proved by Dirr and Wimmer [IEEE Trans. Automat. Control 52(2007), 2151-2153] is infact a matrix extension of a famous and elegant result on the distribution of zeros of polynomials known as Eneström-Kakeya theorem. In this paper, we prove a more general result which inter alia includes the above result as a special case. We also prove an improvement of a result due to Lê, Du, Nguyên [Oper. Matrices, 13(2019), 937-954] besides a matrix extention of a result proved by Mohammad [Amer. Math. Monthly, vol.74, No.3, March 1967].

• 한국통신학회논문지
• /
• 제19권10호
• /
• pp.1861-1871
• /
• 1994

본 논문에서는 농담구조소(濃淡構造素)(GSE, grayscale structuring element)를 갖는 형태학 필터의 실시간 처리를 위한 알고리즘을 제안하였다. 제안된 알고리즘에서는 GSE로부터 유도된 basis matrix와 입력 샘플들로 구성된 input matrix를 이용하여 각 형태학 연산들을 소역행렬연산(local matrix operation)으로 새롭게 정의하고 있는데, 이를 이용하여 opening이나 closing과 같은 복합 형태학 연산들을 실시간으로 처리할 수 있음을 보였다. 제안된 알고리즘은 복원 형태학 연산들을 erosion과 dilation의 직렬조합(cascade combination)으로 처리하던 기존의 방법에 비해 적은 메모리를 필요로 하면서도, 출력을 얻기까지의 지연(遲延)(delay)이 훨씬 적다는 장점을 갖는다. 또한 본 논문에서는 형태학 필터를 VLSI로 구현하기 위한 효율적 방안을 제안하였다. 제안된 방법에서는 p-bit으로 표현되는 신호에 대한 형태학 연산을 p개의 이진(binary) 형태학 연산자들의 조합으로 구현하였는데, 각 이진 연산자들은 MSB(most significant bit)부터 순차적으로 (bit-serial approach) 해당 레벨의 bit들을 처리하여 출력을 부를 구조로 이루어져 있다. 본 논문에서는 형태학 필터의 VLSI 구현에 있어서 제안된 방법이 기존의 Threshold Decomposition 방법 등에 비해 보다 효율적이라는 것을 보였다.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.807-813
• /
• 1986

본 연구에서는 국내에서 생산되고 있는 구상흑연주철을 이단으로 어니일링하 여 기타조직을 3가지(p$_{1}$:28.88% 페라이트, 63.5% 퍼얼라이트, p$_{2}$:49.7% 페 라이트, 42.2% 퍼얼라이트, p$_{3}$:71.26% 페라이트, 22.3% 퍼얼라이트)로 변화시켜 족삭에서 이차원절삭실험을 실시하여 기타조직에 따라 제절삭성(절삭력, 절삭비, 전단 각 및 침의 흐름속도)을 비교검토 하므로서 어니일링효과가 절삭성에 미치는 영향을 검토 연구하였다.

• 대한화학회지
• /
• 제40권9호
• /
• pp.640-648
• /
• 1996

Chitin을 epichlorohydrin과 반응시켜 가교 chitin을 합성하고, $C_2$ 위치의 아세트아미드기를 탈아세틸화하여 가교 chitosan을 얻었다. 가교 chitosan을 증류수에 팽윤시킨 다음 글리세린과 silver sulfadiazine을 가하여 고분자 matrix를 제조하였다. 이렇게 제조된 matrix로부터 in vitro에서의 약물 방출 pattern을 고찰하기 위해 pH7.4 인산염 완충용액 중에서 약물의 함유량, 글리세린의 농도 변화 및 matrix 두께변화에 미치는 인자들에 관하여 연구 검토 하였다. 고분자 matrix내의 약물의 함유량과 matrix의 두께가 증가할수록 약물 방출 지속 시간은 지연되었다. 그러나 글리세린의 함유량이 증가함에 따라 약물 방출 지속 시간은 오히려 감소 하였다. 또한 약물의 함유량과 글리세린의 함유량이 증가할수록 겉보기 방출속도상수 (K)값도 증가하였으나, matrix 두께가 증가함에 따라서는 겉보기 방출속도상수(K)값이 일정하였다. 이상과 같이 가교 chitosan은 약품의 방출 조절형 제제로서 사용 가능성을 나타냈으며, 약물로 사용된 silver sulfadiazine의 방출거동은 Higuchi model에 따른 확산으로 생각되었다.

• Tribology and Lubricants
• /
• 제9권2호
• /
• pp.49-55
• /
• 1993

The dry sliding wear properties of the sintered Cu-10 wt%Sn bronze alloys reinforced with $SiC_w$ and $SiC_p$ were investigated by a pin-on-disc wear testing machine. The worn surfaces and the cross sections of the wear specimens and the wear debris were observed by SEM to study the effect of the variation of the ceramic phase contents in the composite and the wear condition on the wear behaviors. The wear of bronze matrix was dominated by the adhesive wear. The transition from mild to severe wear was found in the bronze matrix specimens at the applied load higher than 20N where the surface delamination caused the severe wear. The addition of $SiC_w$ and $SiC_p$ reinforcements in the romposites was proved to reduce the wear rate by the matrix strengthening at the applied load higher than 20N. SiC whiskers having a large length to diameter ratio which hold the deformed matrix were effective to hinder the crack propagation near the worn surface. Thus the maximum wear resistance was obtained in the composite reinforced by $SiC_w$ at the higher applied load.

• 대한수학회논문집
• /
• 제11권3호
• /
• pp.557-562
• /
• 1996

We find an equivalent condition of $M_n(R)[x, \delta]$ to be primitive and characterize a special subring P of $M_n(R)$. Also, we find an equivalent condition of $P[x, \delta]$ to be primitive.

• Journal of Korean Neurosurgical Society
• /
• 제65권6호
• /
• pp.825-833
• /
• 2022

Objective : ABM/P-15 (anorganic bone matrix/15-amino acid peptide fragment) is a commercially available synthetically manufactured P-15 collagen peptide fragment, that is adsorbed on ABM. This study was done to investigate the efficacy of ABM/P-15 in achieving fusion in the lumbar spine and comparing it with that of recombinant bone morphogenic protein-2 (rhBMP-2) and demineralized bone matrix (DBM). Methods : A retrospective observational study of prospectively collected data of 140 patients who underwent lumbar spinal fusion surgeries in a single specialty spine hospital between 2016 and 2020, with a minimum 6-month follow-up was conducted. Based on the material used for the augmentation of the bone graft at the fusion site, the patients were divided into three categories namely ABM/P-15, rhBMP-2, and DBM group. Results : ABM/P-15, rhBMP-2, and DBM were used in 46, 44, and 50 patients, respectively. Patient characteristics like age, gender, bone mineral density, smoking history, and presence of diabetes mellitus were comparable amongst the three groups. Average follow-up was 16.0±5.2, 17.9±9.8, and 26.2±14.9 months, respectively in ABM/P-15, rhBMP-2, and DBM groups. The fusion was achieved in 97.9%, 93.2%, and 98% patients while the average time-to-union was 4.05±2.01, 10±4.28, and 9.44±3.49 months (p<0.001), respectively for ABM/P-15, rhBMP-2, and DBM groups. The average pre-operative Visual analogue scale score was 6.93±2.42, 7.14±1.97, 7.01±2.14 (p=0.900) for ABM/P-15, rhBMP-2 and DBM groups, respectively, which reduced to 1.02±0.80, 1.21±0.96, and 0.54±0.70 (p=0.112), respectively at the last follow up. Pre-operative Oswestry disability index scores were 52.7±18.02, 55.4±16.8, and 53.56±19.6 (p=0.751) in ABM/P-15, rhBMP-2, and DBM groups, which post-operatively reduced to 33.77±15.52, 39.42±16.47, and 38.3±15.89 (p=0.412) and further to 15.74±8.3, 17.41±10.45, and 16.76±9.81 (p=0.603), respectively at the last follow-up. Conclusion : ABM/P-15 appears to achieve union significantly earlier than rhBMP-2 and DBM in lumbar spinal fusion cases while maintaining a comparable clinical and complication profile.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2200-2202
• /
• 2003

In this paper, differentiation operational matrix for Haar function is derived. Proposed method only using a matrix calculation of Haar discrete matrix and block-pulse function's integration operational matrix. It would be possible to use to design an a1gebraic estimator for fault detection or unknown input observer effectively.

• 소성∙가공
• /
• 제12권2호
• /
• pp.102-109
• /
• 2003

In the manufacturing process of metal matrix composites parts, thixoforging is one of the most effective forming processes. The major purpose of the current study is to provide the proper conditions such as the die shape, the forging velocity, the forging time, the forging pressure and reinforcement injection velocity and pressure on various defects in thixoforged cylinder liner, filling tests were performed by MAGMA S/W. In order to evaluate the effectiveness of the calculated conditions which is given by computer aided engineering, A357, A380 and SiC$_{p}$/A380 cylind~5$mu extrm{m}$r liner were fabricated under the calculated conditions. SiC$_{p}$/A380 composite billets were fabricated by both the mechanical stirring and electrical magnetic stirring process. Incase fo SiC$_{p}$/A380 composite cylinder liner, reinforcement distribution and effect of reinforcement(SiC$_{p}$) content(10~20 vol. %)and size(5.5~14${\mu}{\textrm}{m}$) on the mechanical properties were investigatedstigated.