• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권4호
• /
• pp.388-396
• /
• 2012

In this paper, a $320{\times}240$ pixel, 80 frame/s CMOS image sensor with a low power dual correlated double sampling (CDS) scheme is presented. A novel 8-bit hold-and-go counter in each column is proposed to obtain 10-bit resolution. Furthermore, dual CDS and a configurable counter scheme are also discussed to realize efficient power reduction. With these techniques, the digital counter consumes at least 43% and at most 61% less power compared with the column-counters type, and the frame rate is approximately 40% faster than the double memory type due to a partial pipeline structure without additional memories. The prototype sensor was fabricated in a Samsung $0.13{\mu}m$ 1P4M CMOS process and used a 4T APS with a pixel pitch of $2.25{\mu}m$. The measured column fixed pattern noise (FPN) is 0.10 LSB.

• Steel and Composite Structures
• /
• 제3권6호
• /
• pp.451-474
• /
• 2003

Details are given of a cold-formed steel portal framing system that uses simple bolted moment-connections for both the eaves and apex joints. However, such joints function as semi-rigid and, as a result, the design of the proposed system will be dominated by serviceability requirements. While serviceability is a mandatory design requirement, actual deflection limits for portal frames are not prescribed in many of the national standards. In this paper, a review of the design constraints that have an effect on deflection limits is discussed, and rational values appropriate for use with cold-formed steel portal frames are recommended. Adopting these deflection limits, it is shown through a design example how a cold-formed steel portal frame having semi-rigid eaves and apex joints can be a feasible alternative to rigid-jointed frames in appropriate circumstances.

• 전력전자학회논문지
• /
• 제4권2호
• /
• pp.201-208
• /
• 1999

본 논문에서 회전자 시정수 변화에 따른 벡터제어 시스템의 성능저하에 대하여 고찰하고, 동기좌표계의 탄젠트 토크각과 정지좌표계의 탄젠트 토크각의 일치 관계를 이용하여 온라인으로 회전자 시정수의 변화를 추정하는 알고리즘을 제안한다. 제안한 알고리즘의 타당성을 검토하기 위하여 컴퓨터 시뮬레이션 및 실험을 수행하였다.

• 전기학회논문지P
• /
• 제64권4호
• /
• pp.321-326
• /
• 2015

Smart metering is one of the most implementable internet-of-thing service. In order to implement the smart metering, a wireless communication network should be newly designed and evaluated so as to satisfy quality-of-service of smart metering. In this paper, we consider a wireless network for the smart metering implemented with multi-purpose wireless chips and channel coding-functioned micro controllers. Especially, channel coding is newly adopted to improve successful frame transmission probability. Based on the successful frame transmission probability, average transmission delay and delay violation probability are analyzed. Using the analytical results, service coverage expansion is evaluated. Through the delay analysis, service feasibility can be verified. According to our results, channel coding needs not to be utilized to improve the delay performance if the smart metering service coverage is several tens of meters. However, if more coverage is required, chanel coding adoption definitely reduces the delay time and improve the service feasibility.

• 전기학회논문지P
• /
• 제64권3호
• /
• pp.193-198
• /
• 2015

A large number of vision applications rely on matching keypoints across images. Pedestrian detection is under constant pressure to increase both its quality and speed. Such progress allows for new application. A higher speed enables its inclusion into large systems with extensive subsequent processing, and its deployment in computationally constrained scenarios. In this paper, we focus on improving the speed of pedestrian detection using HOG(histogram of oriented gradient) and multi frame operation which is robust to illumination changes in cluttering images. The result of our simulation indicates that the detection rate and speed of the proposed method is much faster than that of conventional HOG and differential images.

• ETRI Journal
• /
• 제29권6호
• /
• pp.823-825
• /
• 2007

In this letter, we propose a novel algorithm to predict MPEG-coded real-time variable bit rate (VBR) video traffic. From the frame size measurement, the algorithm extracts the statistical property of video traffic and utilizes it for the prediction of the next frame for I-, P-, and B- frames. The simulation results conducted with real-world MPEG-4 VBR video traces show that the proposed algorithm is capable of providing more accurate prediction than those in the research literature.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.612-617
• /
• 2002

To provide beginner with the standard current information on the $\alhpa-\beta$ reference frame of nonlinear load, this paper has focused on the simulation works using MATLAB/SIMULINK in case of current source thyristor controlled rectifier The various $\alhpa-\beta$ components of current/power components are induced by the p-q theory, the results are represented waveforms and trajectories on the $\alhpa-\beta$ reference frame. The compensation effect according to each of the compensating reference components are described.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.965-968
• /
• 2003

This paper describes the PWM-VSI controller of three-phase UPS system using stationary reference frame. This controller meets the specification the UPS inverter output voltage even under the unbalanced or nonlinear load. This controller is also constructed with duble control loop of the outer voltage control loop and the inner current control loop. For the fast response of the output voltage control, yhr inner current control loop of the capacitor current os used. To get the good property against overshoot, the If controller us used. The outer voltage controller is designed with P controller and the high gain transfer function is used for the zero steady state error. All control gains of both controller is designed base on the CDM method.

• Steel and Composite Structures
• /
• 제2권6호
• /
• pp.411-428
• /
• 2002

Non-linear large-displacement elasto-plastic finite element analyses are used to propose design recommendations for the eaves bracket of a cold-formed steel portal frame. Owing to the thinness of the sheet steel used for the brackets, such a structural design problem is not trivial as the brackets need to be designed against failure through buckling; without availability of the finite element method, expensive laboratory testing would therefore be required. In this paper, the finite element method is firstly used to predict the plastic moment capacity of the eaves bracket. Parametric studies are then used to propose design recommendations for the eaves bracket against two potential buckling modes of failure: (1) buckling of the stiffened free-edge into one-half sine wave, (2) local plate buckling of the exposed triangular bracket area.The results of full-scale laboratory tests on selected geometries of eaves bracket demonstrate that the proposed design recommendations are conservative. The use of the finite element method in this way exploits modern computational techniques for an otherwise difficult structural design problem.

• 한국조경학회지
• /
• 제20권3호
• /
• pp.57-63
• /
• 1992

The present investigation was undertaken to determine if CO2 enrichment promoted rooting and subsequent growth of Lagerstroemia indica L. cuttings. Cutting were taken from the one-year-old semihardwood twigs, and rooted in enclosed propagation frame with enriched CO2 levels (500-2000ppm) regulated by a gas monitor. The base of each cutting was dippid from 500 to 4000ppm naphthalenacetic acid. Roothing was determined after 3 months. CO2 enrichment during roothing increased the rooting percentage and number of roots per cutting, but nontreated cuttings rooted in low percentages producing one or two roots. The length of new shoots and dry weight of whole cuttings in CO2 enrichment were significantly greater than those of the atmospheric controls. The organic and inorganic compounds concentraion were measured as an indication of nutritional state in whole cuttings. As a result of CO2 enrichment, carbohydrate, protein and inorganic compounds(total nitrogen, P2O5, K2O, CaO, MgO) concentration were higher than controls.