• Restorative Dentistry and Endodontics
• /
• v.36 no.2
• /
• pp.139-148
• /
• 2011

Objectives: This study investigated the effect of the strength and wetting characteristics of adhesives on the bond strength to dentin. The experimental adhesives containing various ratios of hydrophobic, low-viscosity Bis-M-GMA, with Bis-GMA and TEGDMA, were made and evaluated on the mechanical properties and bond strength to dentin. Materials and Methods: Five experimental adhesives formulated with various Bis-GMA/Bis-MGMA/TEGDMA ratios were evaluated on their viscosity, degree of conversion (DC), flexural strength (FS), and microtensile bond strength (MTBS). The bonded interfaces were evaluated with SEM and the solubility parameter was calculated to understand the wetting characteristics of the adhesives. Results: Although there were no significant differences in the DC between the experimental adhesives at 48 hr after curing (p > 0.05), the experimental adhesives that did not contain Bis-GMA exhibited a lower FS than did those containing Bis-GMA (p < 0.05). The experimental adhesives that had very little to no TEGDMA showed significantly lower MTBS than did those containing a higher content of TEGDMA (p < 0.05). The formers exhibited gaps at the interface between the adhesive layer and the hybrid layer. The solubility parameter of TEGDMA approximated those of the components of the primed dentin, rather than Bis-GMA and Bis-M-GMA. Conclusions: To achieve a good dentin bond, a strong base monomer, such as Bis-GMA, cannot be completely replaced by Bis-M-GMA for maintaining mechanical strength. For compatible copolymerization between the adhesive and the primed dentin as well as dense cross-linking of the adhesive layer, at least 30% fraction of TEGDMA is also needed.

• Clinical and Experimental Pediatrics
• /
• v.49 no.3
• /
• pp.268-272
• /
• 2006

Purpose : The reinfection rate of H. pylori reported before $^{13}C$-urea breath test($^{13}C$-UBT) era was higher than that of the post $^{13}C$-UBT era. Children are usually reluctant to receive invasive endoscopic evaluation for the reinfection of H. pylori, particularly when they are asymptomatic. The aim of the study is to discover the reinfection rate by different diagnostic tests, and to find out what causes the difference. Methods : Children confirmed to be eradicated from H. pylori were included in the study. Reinfection was evaluated by endoscopic biopsy based tests(n=34, mean age $11.5{\pm}3.7$ years) and/or a $^{13}C$-UBT(n=38, mean age $10.0{\pm}3.6$ years) at the time of 18 months after eradication. At first visit, H. pylori infection had been diagnosed by positive results from a rapid urease test, Giemsa stain and Warthin-Starry stain and/or a positive culture. Eradication was defined as negative results from all above tests 1-3 months after eradication therapy. Results : Reinfection rate by endoscopic biopsy based tests was 35.3 percent(12/34). All patients had abdominal symptoms(P=0.000). Reinfection rate was 13.2 percent(5/38) by a $^{13}C$-UBT. Reinfection rate was higher in children with abdominal symptoms(P=0.008). There was no evidence that reinfection rate depended on the sex(P=0.694), age(P=0.827), diseases(peptic ulcers vs gastritis, P=0.730) and eradication regimen(P=0.087). Conclusion : Helocibacter pylori reinfection rate in Korean children was 13.2 percent per 18 months by a non-invasive test or $^{13}C$-UBT. Accurate determinations of the reinfection rate in children is affected by the compliance of the diagnostic tests. Non-invasive tests should be considered to investigate the reinfection rate in children.

• The Journal of Engineering Geology
• /
• v.21 no.1
• /
• pp.65-77
• /
• 2011

Hydrochemical and carbon isotopic (${\delta}^{13}C_{DIC}$) analyses of 11 water samples, and noble gas isotopic analyses of 8 water samples collected in the Kyeoungbuk and Kangwon areas of Korea were performed to determine their hydrochemical characteristics and to interpret the source of noble gases and $CO_2$ gas in the water. The carbonated mineral waters are weakly acidic (PH = 5.59-6.04), and electrical conductivity ranges from 302 to $864\;{\mu}S/cm$. The chemical composition of all the water samples is Ca-$HCO_3$ type. The high contents of Fe and Mn exceed the safe limits for drinking water. The ${\delta}^{13}C_{DIC}$ values of the samples range from -5.30‰ to -2.84‰, indicating that the carbon is supplied mainly from a deep-seated source and to a lesser degree from an inorganic carbonate source. The $^3He/^4He$ ratios of the samples range from $1.51{\times}10^{-6}$ to $6.45{\times}10^{-6}$. The samples plot into three groups on a $^3He/^4He$ versus $^4He/^{20}Ne$ diagram: the deep-seated field (e.g., a mantle source), the atmospheric field, and the air-mantle mixing field. A wide range of $^4He/^{20}Ne$ ratios is observed ($0.036{\times}10^{-6}$ to $1.76{\times}10^{-6}$), indicating that while radiogenic $^4He$ is dominant in these water samples, mantle-origin He is also present. The supply of $CO_2$ gas and noble gases from a deep-seated source to carbonated waters is inferred to be controlled by geological structures such as faults and geological boundaries.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.7
• /
• pp.445-453
• /
• 2012

An investigation for removal of 1-indanone (1-ID), which were commonly produced from the biological and/or chemical treatment and natural weathering of the PAHs-contaminated soils, via oxidative transformation mediated by birnessite in the presence of various phenolic mediators is described. This study also examines the potential effect of the natural occurring substance humic acid (HA) on the oxidative transformation. The experiment was carried out in aqueous phase as a batch test (10 mg/L 1-ID, 0.3 mM phenolic mediators, $1.0g/L\;{\delta}-MnO_2$, at pH 5). All of the 11 tested phenoilic mediators belong to the group of natural occurring phenols and are widely used as model constituents of humic substances. From the results of HPLC analysis, it is demonstrated that 1-ID was not reactive to birnessite itself, but it can be effectively removed in birnessite-mediated cross coupling reactions in the presence of the phenolic mediators. The percent removals of 1-ID after 2 day incubation were ranged from 9.2 to 71.2% depending on the phenolic mediators applied. The initial rate constant ($K_{int}$, $hr^{-1}$) values for the 1-ID removals obtained from the pseudo-first-order kinetic plots also widely ranged from 0.18 to 15.0. Results of the correlative analysis between the removal efficiencies and structural characteristics of phenolic mediators indicate that the transformation of the 1-ID was considerably enhanced by the addition of electron-donating substituents (e.g., -OH, $-OCH_3$) at the benzne ring, and much less enhanced by the addition of electron-withdrawing substituents (e.g., -COOH, -CHO). The presence of HA showed that removal efficiencies of 1-ID in the birnessite-phenolic mediator systems decreased with increasing HA concentrations. However at low concentration of HA (< 2 mg/L), it caused some enhancement in the removals of 1-ID as compared to the control.

• Korean Journal of Plant Resources
• /
• v.22 no.4
• /
• pp.337-342
• /
• 2009

Present studies were conducted to evaluate the effects of medium strength(MS and Hyponex), carbon sources and their concentrations, agar concentrations, and inoculation amounts on prothallus propagation of Pterdium aquilinum var. latiusculum(Desv.) Underw. ex Hell in vitro. The optimum MS medium strength for prothallus propagation was 2MS concentration. Phosphate source was most effective for prothallus growth of P. aquilinum var. latisculum. The addition of 1% sucrose or glucose to MS medium promoted prothallus multiplication. Growth of prothallus was not affected by agar concentration. Propagation of homogenized prothallus was vigorous even in liquid medium. Chopped gametophytes(100 and 200 mg) were inoculated on 250 ml ${\Delta}$flask with 100 mL of 2MS concentration medium and suspension culture was done at 100 rpm for 22 days. After 20 days, prothallus multiplication slowed down, so 100 mg of chopped prothalli is recommended for initial inoculation, since initial amount of inoculum did not affect subsequent prothallus multiplication. Consequently after 20 days of suspension culture, prothallus should be subcultured or transplanted outside of growing vessels.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.2
• /
• pp.361-370
• /
• 2004

The purpose of this study was to evaluate the outcome and Factors that influence the quantity of Phoria in the low correction and perfect correction. Also the coincidence with the opticenter and the pupillary distance was a principal factor that influence the quantity of Phoria. Thereupon, this study is attributed to promote the perfect Phoria test. The subjects for this study were 120 persons(240 eye) in myopic refractive errors. ISP/WIN program was used for the data analysis. The collected data was analyzed by descriptive statistics and Spearman's correlation coefficient. The results of this study were as follows: 1. The prism pattern was difference between low correction and perfect correction in the Phoria test. The proportion of orthophoria was changed from 10.0% to 12.5%, exophoria was changed from 67.5% to 62.5%, and esophoria was changed from 22.0% to 32.5%, respectively. 2. The average of optical center distance and pupillary distance were 31.70mm and 31.49 mm, respectively. 3. Among the 120 myopic glasses wearers, the distance between optical centers was coincided with the pupillary distance in 37.5%, and discrepant in 62.5%. 4. For the patients who were coincided with the pupillary distance, the proportion of exophoria decreased 53.33%, esophoria increased 20.0%. 5. For the changing of the quantity of Phoria in the low correction, the degree of exophoria decreased 1.11 prism diopters in the perfect correction, esophoria increased 0.39 prism diopters.

• Applied Biological Chemistry
• /
• v.51 no.4
• /
• pp.281-287
• /
• 2008

Effect of combined use of anti-microbial materials, such as alcohol, mustard and chitosan, or pasteurization on the quality of low salted kochujang was investigated during storage at $30^{\circ}C$ for 12 weeks. Activity of amylase decreased during storage, with lower activity in pasteurized kochujang than the other groups. Acidic protease activity increased during storage, but neutral protease activity decreased after 4 weeks. Viable cells of yeast increased during storage, but bacterial counts decreased gradually and did not show any remarkable difference among the test groups. Hunter a-values decreased as storage time increased, whereas L- and b-values decreased after 4 weeks and the degree of increase in total color difference (${\Delta}E$) was low in the supplementary ingredients added kochujang. The moisture contents and water activities decreased during storage with being lower in supplementary ingredients added groups. Titratable acidity of kochujang was decreased after 4 weeks of storage with the highest in combination of the supplementary ingredients added group. Oxidation-reduction potential was low in the supplementary ingredients added kochujang. Total sugar and reducing sugar contents of kochujang decreased during storage, with the highest contents in the supplementary ingredients added group. Ethanol content of kochujang increased during storage, whereas ethanol production was reduced in ethanol added one. Amino-nitrogen and ammonia-nitrogen contents decreased during storage with being lower in kochujang prepared with supplementary ingredients. Therefore, supplementary ingredients added kochujang would be effective for extending shelf-life of kochujang.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.1
• /
• pp.70-78
• /
• 1991

Both long period of summer drought and unusual high water temperature in 1988 caused the harmfull effect to the aquacultural organisms in south coast of Korea. One of those was the mass mortality of arkshell seedlings in Jinhae Bay. The purpose of this study was to verify the effects of environmental factors on arkshell seedlings by investigating not only water quality and food organisms in culturing grounds, but also meteorological conditions. Water temperature in November was higher at $2.0^{\circ}C$ than mean water temperature and the concentration of total inorganic nitrogen and N/P ratio were $0.38{\mu}g-at/l,$ 0.98, respectively which indicated the exhaustion of nutrients, especially nitrogen in the study area. In analysis of phytoplankton population structure, species diversity index(H) , equitability-index(e), species richness $index(d_1)$ were low, but dominance $index({\delta}_2)$ was high at the value of 98.4 and dominant species was Nitzschia pungens. In conclusion, it seems that mass .mortality of arkshell seedlings in November was resulted from the metabolism disorder with poor food organism under the unstable marine environment.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.268-279
• /
• 1994

The x-ray powtler pattern of single phase $Bi_2S_2CaCu_2O_{8+x}$ has been identified and fullyindexed using a pseudotetragonal subcell with a= 5.408, c = 30.83 $\AA$ and an incommensurate supercellwith reciprocal lattice vector, X$q^*$, given by $q^*=0.211b^*-c^*$. The x -ray powder pattern of the Pb-free110K superconductor phase "$Bi_2S_2CaCu_2O_{10+x}$" has many lines which belong t.o an incommensuratesupercell. Using elect.ron d~ffraction pImt.ographs as a indexing guide, an indexing scheme for the powderpattern has been obtained. The unit cell has a geometrically orthorhombic subcell a=5.411, b= 5.420, c=37.29(2) $\AA$. Supercell reflections have indices that are derived from the subcell k, 1 indices by addition uf$\pm q^*$, where $\pm q^*=0.211b^*-0.78c^*$The incommensurate con~ponent In the b dwection, $\delta$, is the same for both phases but on going from2212 to 2223 phase, the superlattic component in the c direction changes from commensurate($\varepsilon$=1) toincommensurate($\varepsilon$=0.78).X>$\varepsilon$=0.78).

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.2
• /
• pp.148-159
• /
• 2003

Statement of problem Metal-ceramic restorations have been used extensively by dental clinicians for nearly 40 years. Strength an functional ability of metal-ceramic restorations are proved to be satisfying, However esthetics and biocompatibility of metal alloy which is used in metal-ceramic restoration is not ideal. Using pure gold as an alternative, have advantage of esthetics, biocompatibility over conventional metal alloy. But there had been little article which studied on the color effect of pure gold on fual porcelain color. Purpose The purpose of this study was to spectrophotometrically evaluate the difference between color of metal alloy(Au-Pt, Ni-Cr) and pure gold, during color masking procedure with opaque porcelain and to analyze the differences, Material and Methods Three types of metal - base metal(Ni-Cr), high gold alloy(Au-Pt), pure gold(GES) - specimen were fabricated 1cm in diameter. Four steps were established - after finishing, after pre-coditioning, after application of first opaque porcelain(0.08mm in thickness), after application of second opaque porcelain(0.15mm in thickness)- and tested color with spectrophotometer every each steps and analyzed with $CIEL^*a^*b^*$ color order system. One-Way ANOVA test was used to and out if there were significant differences between groups tested and Shaffe multiple comparison was used to identify where the differences were. Results 1. After finishing and pre-conditioning, pure gold(GES) group showed most high values in $L^*,a^*,b^*$. 2. After application of first opaque porcelain(0.08mm in thickness), after application of second opaque porcelain(0.15mm in thickness), pure gold(GES) group showed the least difference in $L^*,a^*,b^*$ values and the lowest ${\Delta}E$ value(${\Delta}E$=0.63). 3. After application of first opaque porcelain and after application of second opaque porcelain differences that were significant (P<0.05) between groups were found only in $a^*$ values. 4. Base metal alloy group showed the lowest $a^*$ value in test after application of first opaque porcelain and the highest value in test after application of first opaque porcelain Conclusion Pure gold group and high gold group showed higher $a^*$ values than base metal group when tested after 0.08mm thickness of opaque porcelain was applied and pure gold group showed much similar $L^*,a^*,b^*$ values between 0.08mm thickness and 0.15mm thickness of opaque porcelain. This meant that pure gold was more easily masked by opaque porcelain than the other two groups.