• 제목/요약/키워드: P-base

검색결과 2,505건 처리시간 0.035초

Barge의 천골 기저부 X-ray에 대한 연구 (Study about sacral base X-ray of Barge)

  • 민영광
    • 척추신경추나의학회지
    • /
    • 제6권1호
    • /
    • pp.19-26
    • /
    • 2011
  • Objectives : The purpose of this study is to research the necessity of sacral base X-ray that Barge insisted. Methods : I have done a comparative analysis in side of short leg and side of sacral inferior with sacral base X-ray and pelvis A-P Xray pictures of 42 patients with lower back pain from December 1, 2010 to March 31, 2011. Results : Even though most of the subjects in study were male, 36 people had plateau of sacral base and 29 people had symmetry in sacral base X-ray. There was no statistical significance in the side of short leg and side of sacral base inferior in Sacral base X-ray, but there was a statistical significance in pelvis A-P x-ray. 22 people had same side of short leg and side of sacral base inferior in sacral base X-ray and pelvis A-P X-ray and 14 people didn't. 29 people had same side of sacral base inferior in sacral base X-ray and pelvis A-P X-ray and 13 people didn't. Conclusions : According to the result of the study, sacral base X-ray is necessary for correct sacral base inferior analysis.

  • PDF

외상환자의 초기 사망 예측 지표로서의 내원 초기의 염기 결핍, 젖산 및 강이온 차이의 유용성 비교 (The Comparison of Base Deficit, Lactate, and Strong Ion Gap as Early Predictor of Mortality in Trauma Patients)

  • 박경혜;이강현;김선휴;오성범;문중범;김현;황성오;김헌주
    • Journal of Trauma and Injury
    • /
    • 제18권2호
    • /
    • pp.127-134
    • /
    • 2005
  • Purpose: Currently, there is a variety of systems available for predicting prognosis of trauma patients such as trauma score, Injury severity score (ISS) and acid-base variables. But it is not clear that the initial acid-base variables are predictors of prognosis in trauma patients at the emergency department. The objective of this study is to compare the base deficit, lactate and strong ion gap as an early predictor of mortality in trauma patients. Methods: Retrospective record review of 136 trauma patients needed to admit to intensive care unit via emergency department (June 2004 to February 2005). Data included age, injury mechanism, ISS, Revised trauma score (RTS), Multiple organ dysfunction score (MODS), Acute physiology and chronic health evaluation III (APACHE III), Glasgow coma scale (GCS), laboratory profiles, calculated anion gap and strong ion gap. Patients were divided into survivors and non-survivors, shock group and non-shock group with comparison by t-test;significance was assumed for p<0.05. Correlation between acid-base variables and mean arterial blood pressure (MABP) was evaluated. Results: There was a significant difference between the RTS (p=0.00), APACHE III (p=0.00), MODS (p=0.00), GCS (p=0.00) of survivors and non-survivors. There was no significant difference between the ISS (p=0.082), lactate (p=0.541), base excess (p=0.468) and SIG (p=0.894) of survivors and non-survivors. There was a significant difference between the RTS (p=0.023), APACHE III (p=0.002), lactate (p=0.000), base excess (p=0.000) and SIG (p=0.000) of shock and non-shock group. There was no significant difference between the ISS (p=0.270), MODS (p=0.442) and GCS (p=0.432) of shock and non-shock group. The base excess was most correlated to MABP (r2=0.150). Conclusion: Initial base deficit, serum lactate and SIG are not predictors of mortality in moderate to severe trauma patients. Initial base deficit, serum lactate and SIG are correlated with the mean arterial blood pressure in trauma patients in emergency department.

열적, 기계적 피로응력이 교정용 브라켓의 결합강도에 미치는 영향 (Effects of Thermal and Mechanical Fatigue Stress on Bond Strength in Bracket Base Configurations)

  • 김정기;김상철
    • 대한치과교정학회지
    • /
    • 제30권5호
    • /
    • pp.625-642
    • /
    • 2000
  • 본 연구는 열적 및 기계적 피로응력이 교정용 브라켓의 전단결합강도, 인장결합강도, 전단-인장 복합 결합강도에 미치는 영향과 결합상태에 미치는 영향, 그리고 접착파절 양상을 비교하는데 목적이 있다. 이를 위하여 기저부 형태가 다른 5종의 금속 브라켓을 교정치료를 목적으로 발거한 상$\cdot$하악 소구치에 부착하여, 계면에 200g의 전단-인장 복합 하중을 4주간 가한 기계적 피로시험과, 5,000회의 thermocycling을 시행한 열적 피로시험 후, 전단결합강도, 인장결합강도, 및 전단-인장 복합 결합강도를 측정하고, 파절양상을 분석하여 다음과 같은 결과를 얻었다. 1. 정적시험에서 얻은 브라켓 접착부의 결합강도는 Photoetched base가 가장 크고, Integral base가 가장 작았다(p<0.05). 모든 종류의 브라켓에서 전단결합강도가 가장 컸으며, 전단-인장 복합 결합강도는 전단결합강도의 1/3 수준으로 가장 작았다. 2. 4주간 200g의 전단-인장 복합 하중을 가한 후의 결합강도는 Photoetched base가 가장 크고, Integral base가 가장 작았으며 (p<0.05), 기계적 피로시험 후 Photoetched base와 Micro-Etched Foil Mesh base의 전단, 인장, 전단-인장 복합 결합강도가 감소하였고, Chessboard base의 전단결합강도가 감소하였다(p<0.05). 3. 5,000회의 thermocycling 후의 결합강도는 Photoetched base가 가장 컸고, integral base가 가장 작았으며(p<0.05), 열적 피로시험 후 Photoetched base와 Chessboard base, Micro-Etched Foil Mesh base의 결합강도가 모두 감소하였다(p<0.05). 4. 정적시험의 결합강도 측정 후 접착파절은 브라켓/레진 계면에서 일어났으며, thermocycling 후에는 브라켓/레진 계면과, 법랑질/레진 계면, 레진내 파절이 혼합되어 나타나 ARI 점수가 높아졌다. 기계적 피로시험 후에는 정적시험 때와 비슷한 ARI 점수를 보였다. 5. 모든 브라켓에서 thermocycling 후 브라켓/레진 계면과 법랑질/레진 계면에서 미세 균열이 관찰되었다.

  • PDF

CAD/CAM 의치상 레진과 열중합 의치상 레진의 두께에 따른 굴곡 강도 비교 (Comparison of flexural strength according to thickness between CAD/CAM denture base resins and conventional denture base resins)

  • 이동형;이준석
    • 구강회복응용과학지
    • /
    • 제36권3호
    • /
    • pp.183-195
    • /
    • 2020
  • 목적: 이 논문의 목적은 CAD/CAM 의치상 레진과 열중합 의치상 레진의 굴곡 강도를 비교해보고, 두께에 따른 굴곡 강도 변화도 비교해보는 것이다. 연구 재료 및 방법: 열중합 의치상 레진은 Lucitone 199® (C-LC)을 사용하였다. 3D printing 의치상 레진으로는 DIOnavi - Denture (P-DO)와 DENTCA - Denture Base II (P-DC)를 사용하였다. 밀링 PMMA 블록으로는 Vipi Block Gum (M-VP)과 M-IVoBase® CAD (M-IV)를 사용하였다. 시편의 최종 규격은 65.0 mm × 12.7 mm × 1.6 mm / 2.0 mm / 2.5 mm였다. 굴곡 강도와 굴곡 탄성율을 측정하기 위해 3점 굽힘 시험을 실시하였다. 그리고 파절된 시편의 단면을 주사전자현미경 (SEM) 을 사용하여 분석하였다. 데이터의 정규성을 확인한 뒤 일원분산분석(one-way ANOVA)을 사용하여 유의 수준 P = 0.05로 설정하여 그룹 간의 차이를 평가한 뒤, 사후 분석을 위해 Tukey HSD test를 시행하였다. 결과: 동일 두께 내에서, P-DO를 제외한 나머지 CAD/CAM 의치상 레진들과 열중합 의치상 레진의 굴곡 강도는 유의한 차이를 나타내었다. M-VP는 열중합 의치상 레진 보다 굴곡 강도가 높게 나타났고, P-DC와 M-IV는 낮은 굴곡 강도를 보였다. 굴곡 탄성률은 M-VP에서 제일 높게 나타났고 C-LC, P-DO, P-DC, M-IV 순으로 낮아졌으며 재료간에 모두 유의한 차이가 나타났다. 두께에 따른 굴곡 강도는, C-LC에서는 2.5 mm가 1.6 mm보다 유의하게 높은 굴곡 강도를 보였고, P-DC, M-VP는 2.5 mm와 2.0 mm에서 1.6 mm보다 유의하게 높은 굴곡 강도가 나타났다. M-IV에서는 두께가 증가할수록 유의한 굴곡 강도 증가가 나타났다. SEM 분석 결과 서로 다른 재료들의 파절된 단면은 각기 다른 양상을 띄었다. 결론: 본 연구에서 사용된 CAD/CAM 의치상 레진의 굴곡 강도는 각 재료의 성분 및 특성에 따라 다양하게 나타났다. CAD/CAM 의치상 레진의 굴곡 강도는 두께가 감소하여도 1.6 mm 이상의 두께에서는 ISO 20795-1:2013에서 제시하는 굴곡 강도보다 높게 나타났다. 하지만 보다 얇은 두께의 의치를 임상적으로 사용하기 위해서는, 더 낮은 두께의 의치상 레진의 다른 특성들에 관한 추가적인 연구가 필요하다.

Staphylococcus aureus에서 분리된 유발성 ${\beta}$-Lactamase 유전자의 유전적 구성 (Genetic Organization of an Inducible ${\beta}$-Lactamase Gene Isolated from Chromosomal DNA of Staphylococcus aureus)

  • 김영선;민경일;변우현
    • 미생물학회지
    • /
    • 제32권1호
    • /
    • pp.20-27
    • /
    • 1994
  • 항생물질에 대한 다중 저항성을 갖는 Staphylococcus aureus 균주의 chromosomal DNA로부터 유발성 발현을 하는 ${\beta}$-lactamase(bla) 유전자를 확인, 분리하였다. Cloning에 이어 결정된 염기서열을, S. aureus 에서는 지금까지는 plasmid상에서만 분리, 보고되어 있는 bla 유전자들의 염기서열과 비교하였다. 본 bla 유전자의 구조유전자 부분인 843base의 염기서열은 기 발표된 pPC1, pl258, pS1, pI1071, pUB101, pl3796 및 pI3804 유래의 bla 유전자들 중 pPC1, pI258 및 pS1상에 존재하는 bla 구조유전자의 염기서열과 완전히 일치하였고 나머지 것들과도 매우 높은 상동성(99%)을 유지하고 있었다. Bla구조 유전자의 상류 370base 및 하류 220base까지 결정된 염기서열을 비교한 결과에서는 다른 모든 bla구조유전자의 상류 150base에 위치하는 HindIII 인식부위가 약 230base 이상 더 윗쪽으로 옮겨가 있었고 이 HindIII 인식부위를 포함하는 염기서열에서 ORF의 C말단이 발견되었다. 하류 서열에서는 pI1071 유래 bla가 갖는 두개의 직접반복 염기서열 중 하나가 결손된 형태를 보이고 있다. 구조 유전자 상류에 존재하는, 80개 아미노산으로 구성된 ORF의 상동성 검색 결과 Tn4001 의 transposase 의 C 말단과 일치함이 발견되었다.

  • PDF

Staphylococcus aureus DH1에서 분리된 R-plasmid pSBK203의 복제 개시 유전자(rep) 분리 및 염기서열 결정 (Cloning and Base Sequence Determination of Replication Initiation Gene (rep) Isolated from Staphylococcus aureus DH1 R-plasmid pSBK203)

  • Park, Seung-Moon;Kwon, Dong-Hyun;Byeon, Woo-Hyeon
    • 미생물학회지
    • /
    • 제31권1호
    • /
    • pp.44-47
    • /
    • 1993
  • A replication initiation gene was identified and its nucleotide sequence has been determined from a 3.8 kb, chloramphenicol acethyltransferase conferring R-plasmid pSBK203 of Staphylococcus aures. Location of the replication related region of pSBK 203 was determined by interuption with pUC 119 at XBaI and MspI sites which resulted in inactivation of replication in Bacilius subtilis. Base sequence of this region revealed on open reading frame of 942 base pairs, which encoded a 314 amino acid protein. Base sequence homology with other rep of pT181 family plasmids such as pT181, pC221, pC223, pS194, pU112, and pCW7 was ranged from 78% to 97% and the predicted amino acid sequence homology was from 72% to 95%.

  • PDF

화학적 표면처리가 열중합형 의치상 레진과 이장재간의 굴곡결합강도에 미치는 영향 (Effect of chemical surface treatment on the flexural bond strength of heat curing denture base resin and reliners)

  • 최에스더;한민수;권은자
    • 대한치과기공학회지
    • /
    • 제37권4호
    • /
    • pp.219-227
    • /
    • 2015
  • Purpose: The purpose of this study was to evaluate the effect of the chemical surface treatment on the flexural bond strength of heat curing denture base resin and reliners. Methods: Denture base resin surface was treated with MMA 95% and TEGDMA 5%, MMA 95% and silane coupling agent 5%, heat curing resin monomer. After denture reliners were injected, flexural bond strength was measured. Results: The repair resin of Vertex SC was higher than Lang, hard reliner of Kooliner was higher than Rebase. Soft reliner of Dura base and Coe-soft showed differently according to the surface treatment. The all chemical treatment groups on Vertex SC were significantly higher than control(p<0.05). In Lang group, 5% MPS treated group showed significantly higher flexural bond strength than others(p<0.05). In Kooliner group, all chemical treatment groups showed significantly higher than control(p<0.05). In Rebase group, the 5% MPS and the monomer denture base resin treated groups showed significantly higher than others(p<0.05). In Dura base group, 5% MPS treated group showed significantly higher flexural bond strength than others(p<0.05). In Coe-soft group, all treated groups were significantly higher than control group(p<0.05). Conclusion: TEGDMA, MPS, and the monomer of heat-cured denture base resin were effective to improve the bond strengths between denture base and denture relining materials. Especially, 5% MPS expected to strengthen effectively the bonding property of denture base and denture reliners within the results of this study.

선호하는 식물성 Base oil에 따른 클렌징 오일이 피부에 미치는 영향 (The Effects of Cleansing oil on Skin by preferred Vegetable Base oil)

  • 김정은;이재남
    • 한국산학기술학회논문지
    • /
    • 제20권4호
    • /
    • pp.264-274
    • /
    • 2019
  • 본 연구는 선호하는 식물성 Base oil에 따른 클렌징 오일이 피부에 미치는 영향에 대해 알아보고자 하였다. 먼저 설문조사(100명)를 통해 세안 습관 실태 및 선호하는 식물성 Base oil를 파악하고, 이를 바탕으로 4종의 클렌징 오일을 제조하여 실험을 진행하였다. 실험은 20~30대 성인여성 10명을 대상으로 선정하여 실험 전 후 수분보유량, 유분보유량, 경피수분손실량(TEWL)을 측정하였고, 실험 후 만족도 설문조사를 실시하여 분석하였다. 그 결과, 클렌징 오일의 식물성 Base oil 종류에 따른 선호도 설문조사에서는 로즈힙 오일, 올리브 오일, 살구씨 오일, 동백 오일 순으로 나타났다. 임상 실험결과, 선호하는 식물성 Base oil에 따른 클렌징 오일(4종)의 클렌징 전 후 수분보유량과 유분보유량의 변화폭은 Base oil에 따라 차이는 있었으나 모두 증가하는 것으로 나타났다(p<0.001, p<0.001). 또한 TEWL의 변화량도 Base oil에 따라 차이는 있었으나 모두 감소하였다(p<0.01). 실험 후 주관적 만족도 설문조사 결과에서는 로즈힙 오일이 함유된 클렌징 오일(RHC)이 세정력 및 주관적인 만족도면에서 가장 높게 나타났다. 결론적으로 선호하는 식물성 Base oil에 따른 클렌징 오일이 피부의 유 수분보유량과 TEWL의 개선에 긍정적인 영향을 미쳐 피부장벽을 보호함으로서 피부개선 효과가 있음을 알 수 있었다. 따라서 개개인마다 피부타입과 선호하는 오일 및 사용감에 따른 만족도는 다르지만 본 연구의 식물성 Base oil에 따른 클렌징 오일은 단순히 세정의 차원을 넘어 피부건조와 피부장벽을 보호하는 피부보호 제품으로서 도움이 될 수 있을 것이다.

CONVERGENCE OF PREFILTER BASE ON THE FUZZY SET

  • Kim, Young-Key;Byun, Hee-Young
    • Korean Journal of Mathematics
    • /
    • 제10권1호
    • /
    • pp.5-10
    • /
    • 2002
  • In this paper, we investigate the prefilter base on a fuzzy set and fuzzy net ${\varphi}$ on the fuzzy topological space (X,${\delta}$). And we show that the prefilter base $\mathcal{B}({\varphi})$ determines by the fuzzy net ${\varphi}$ converge to a fuzzy point $p$ iff the fuzzy net ${\varphi}$ converge to a fuzzy point $p$. Also we prove that if the prefilter base $\mathcal{B}$ converge to a fuzzy point $p$, then the $\mathcal{B}$ has the cluster point $p$.

  • PDF

트렌치 게이트 IGBT 에서의 공정 및 설계 파라미터에 따른 항복 전압 특성에 관한 연구 (A Study on the Breakdown Voltage Characteristics with Process and Design Parameters in Trench Gate IGBT)

  • 신호현;이한신;성만영
    • 한국전기전자재료학회논문지
    • /
    • 제20권5호
    • /
    • pp.403-409
    • /
    • 2007
  • In this paper, effects of the trench angle($\theta$) on the breakdown voltage according to the process parameters of p-base region and doping concentrations of n-drift region in a Trench Gate IGBT (TIGBT) device were analyzed by computer simulation. Processes parameters used by variables are diffusion temperature, implant dose of p-base region and doping concentration of n-drift region, and aspects of breakdown voltage change with change of each parameter were examined. As diffusion temperature of the p-base region increases, depth of the p-base region increases and effect of the diffusion temperature on the breakdown voltage is very low in the case of small trench angle($45\;^{\circ}$) but that is increases 134.8 % in the case of high trench angle($90\;^{\circ}$). Moreover, as implant dose of the p-base region increases, doping concentration of the p-base region increases and effect of the implant dose on the breakdown voltage is very low in the case of small trench angle($45\;^{\circ}$) but that is increases 232.1 % in the case of high trench angle($90\;^{\circ}$). These phenomenons is why electric field concentrated in the trench is distributed to the p-base region as the diffusion temperature and implant dose of the p-base increase. However, effect of the doping concentration variation in the n-drift region on the breakdown voltage varies just 9.3 % as trench angle increases from $45\;^{\circ}$ to $90\;^{\circ}$. This is why magnitude of electric field concentrated in the trench changes, but direction of that doesn't change. In this paper, respective reasons were analyzed through the electric field concentration analysis by computer simulation.