• 환경생물
• /
• 제38권3호
• /
• pp.476-480
• /
• 2020

A marine red algal species was collected from Uljin, located on the eastern coast of Korea, during a survey of marine algal flora. This alga shares the generic features of Plocamium, and is characterized by linear, flat and thin thalli with narrow axes, branches developing in alternating pairs from margins of the axes, two to four times alternately pinnately branching, linear or occasionally adaxially curved lowermost branchlets and distinctly and compactly clustered stichidia. In a phylogenetic tree based on rbcL sequences, the Korean alga nests in the same clade as P. serrulatum. The genetic distance between both sequences within the clade was calculated as 0.0-0.2%. Based on the morphological and molecular data, this Korean species is identified as P. serrulatum described originally from Taiwan. This is the first record of P. serrulatum in Korean marine algal flora.

• The Journal of Advanced Prosthodontics
• /
• 제9권4호
• /
• pp.278-286
• /
• 2017

PURPOSE. The aim of this study was to determine the influence of long base lengths of a fixed partial denture (FPD) to rotational resistance with variation of vertical wall angulation. MATERIALS AND METHODS. Trigonometric calculations were done to determine the maximum wall angle needed to resist rotational displacement of an experimental-FPD model in 2-dimensional plane. The maximum wall angle calculation determines the greatest taper that resists rotation. Two different axes of rotation were used to test this model with five vertical abutment heights of 3-, 3.5-, 4-, 4.5-, and 5-mm. The two rotational axes were located on the mesial-side of the anterior abutment and the distal-side of the posterior abutment. Rotation of the FPD around the anterior axis was counter-clockwise, Posterior-Anterior (P-A) and clockwise, Anterior-Posterior (A-P) around the distal axis in the sagittal plane. RESULTS. Low levels of vertical wall taper, ${\leq}10-degrees$, were needed to resist rotational displacement in all wall height categories; 2-to-6-degrees is generally considered ideal, with 7-to-10-degrees as favorable to the long axis of the abutment. Rotation around both axes demonstrated that two axial walls of the FPD resisted rotational displacement in each direction. In addition, uneven abutment height combinations required the lowest wall angulations to achieve resistance in this study. CONCLUSION. The vertical height and angulation of FPD abutments, two rotational axes, and the long base lengths all play a role in FPD resistance form.

• ALGAE
• /
• 제27권4호
• /
• pp.259-268
• /
• 2012

The genus Pterosiphonia is composed of 22 species worldwide and four of these species have been reported in the North-East Asia. In Korea, P. pennata originally described from the Mediterranean Sea has been previously recorded from the southern coast as a widespread species. In order to confirm the same species from Korea and Mediterranean, we observed the morphology of Korean Pterosiphonia specimen and analyzed rbcL sequences for inferring phylogenetic relationships among similar congeners. Korean entity was recognized as a new species, Pterosiphonia arenosa sp. nov. The new species is characterized by ecorticate axes with 7-10 pericentral cells, branches formed every two segments, and coalesced with main axis over 1-1.25 axial segments, and tetrasporangia formed in straight series on determinate branches of the upper parts of erect axes. A phylogenetic analysis of rbcL sequences demonstrated that P. arenosa was distinct from P. pennata found in Spain as well as other species. In conclusion, morphological and molecular sequence data indicated that P. arenosa sp. nov. has been previously misidentified as P. pennata in Korea.

• 보존과학회지
• /
• 제29권4호
• /
• pp.367-378
• /
• 2013

원삼국시대에 속하는 경기도 김포시 양촌유적에서 출토된 단조철부 5점과 주조철부 1점을 대상으로 미세조직 관찰과 비금속개재물 분석을 실시하였다. 단조품에 사용된 소재는 순철에 가까운 소재와 저탄소강이 사용되었고 성형 후 1점에만 담금질을 하였다. 주조품은 주철을 탈탄시킨 미세조직이 보여 주철탈탄 제강법이 적용된 것을 확인하였다. 비금속개재물 분석결과 철부는 고체저온환원법으로 제련하여 생산된 괴련철을 두드려서 제작하였다. FeO 함량이 $SiO_2$에 비해 비교적 높게 나타나 제련 시 노의 온도가 환원에 충분하지 못해 Fe의 회수율이 적었던 것으로 보이며 이 과정에서 광물에 포함된 K, P, Mg, Mn, Ti 등 불순물이 혼입되었다. Ca 함량이 높게 검출되는 곳이 있어 일부는 조제제로 석회물질을 넣었던 것으로 추정된다.

• 한국지진공학회논문집
• /
• 제18권5호
• /
• pp.213-219
• /
• 2014

The source parameters of four earthquakes with magnitude larger than 4.0 nearby the offshore Sinan are analyzed. The waveform inversion method is used for analyzing the source parameters of two events (20 August 2012 and 21 April 2013) with C&B and AK135-c crustal velocity structure models. The source parameters of the other two events (26 July 1994 and 23 March 2003) are obtained from references. Focal mechanisms of the events are strike slip faulting or strike slip faulting with a thrust component. The directions of P-axes of the events are ENE-WSW or NE-SW which are similar to previous studies on P-axes in and around the Korean peninsula. With regard to the events nearby the offshore Sinan, the regional stress, rather than being local stress, is seen to be the result of the combination of tectonic forces from the compression of plates colliding to the Eurasian Plate.

• 한국지구과학회지
• /
• 제35권5호
• /
• pp.354-361
• /
• 2014

Fault plane solutions in North Korea and the northern part of the Yellow Sea ($37.5^{\circ}N-40.5^{\circ}N$, $124.5^{\circ}E-128.5^{\circ}E$) was studied for the earthquakes that occurred from November, 2008 to May, 2013. The analysis was based on the data collected from seismic networks in Korea and China. Fault plane solutions were obtained from P and SH wave polarities and SH/P amplitude ratioes. Most earthquakes exhibited predominantly strike-slip fault characteristics with NNE-SSW or WNW-ESE nodal planes. The P-axes trends are mainly NE-SW or ENE-WSW direction in the northern part of the Yellow Sea and inland area of North Korea except some areas in the Hwanghae province. Fault plane solutions and main axis of stress field in the study region were similar to those observed in the southern part of the Korean Peninsula.

• 한국지진공학회논문집
• /
• 제9권3호
• /
• pp.51-58
• /
• 2005

최근 우리나라에서는 건축적 또는 사회적 요구로 비정형 고층 RC건물이 급증하고 있으나, 이와 같은 건물을 내진설계하는데 요구되는 지진의 방향성과 직교성을 적응하기 위한 구체적인 방법이 제시되어 있지 않아 설계자들이 설계하는데 어려움이 있다. 따라서, 본 논문에서는 우리나라에서 실제 건설된 비정형고층 RC건물을 스펙트럼해석법과 시간이력해석법에 따라 SAP2000을 사용하여 동적해석을 수행한 후, 하부골조 기둥의 설계력을 비교함으로써 주축의 설정과 지진의 방향성을 고려하는 것이 설계력에 미치는 영향, 그리고 방향성과 직교성을 모두 만족시킬 수 있는 방법에 대해 연구하였다. 연구결과 내린 결론은 다음과 같다. 1) 지진에 직각방향 전단력이 발생하지 않는 방향을 주축으로 정의하여 설계부재력을 구하면, 동적밑면전단력 보정계수가 감소하기 때문에 X, Y축을 주축으로 정하여 설계부재력 구하였을 때보다 설계부재력이 $15\%$정도 작은 값을 보여주었다. 2) 100/30법에 따라 방향성을 고려하여 구한 설계부재력은 2방향 시간이력해석결과로부터 구한 최대설계부재력보다 큰 값을 보여주어 100/30법에 따라 직교성을 고려하는 방법은 타당한 것으로 나타났으나, 시간이력해석결과에서 부재력을 나타내는 벡터$(P,\;M_y,\;and\;M_z)$ 많은 부분이 100/30법에 따라 예측한 설계부재력의 영역을 벗어났다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1871-1874
• /
• 2005

The direct write FIB technology has several advantages over contemporary micro-machining technology, including better feature resolution with low lateral scattering and capability of maskless fabrication. Therefore, the application of FIB technology in micro fabrication has become increasingly popular. In recent model of FIB, however the feeding system has been a very coarse resolution of about a few ${\mu}m$. Our research is the development of nano stage of 200mm strokes and 10nm resolutions. Also, this stage should be effectively operating in ultra high vacuum of about $1x10^{-7}$ torr. This paper presents the discussion and results of CAE of the 2 axes stages. we have estimated the stable static and dynamic characteristics for dual servo system. Therefore the 2 axes stages developed and future work are introduced at the end of the paper.

• 한국지구과학회지
• /
• 제27권3호
• /
• pp.341-347
• /
• 2006

2001년부터 2005년까지 한반도 남서부에서 발생한 7개 미소지진에 대한 진원 기구해를 분석하였다. 진원 기구해를 구하기 위하여 P파 초동극성과 SH/P 진폭비 자료를 이용한 격자탐색을 수행하였다. 분석 결과, 대부분의 지진들이 일부 역단층 성분을 포함하는 주향이동 단층 운동과 관계된 것으로 해석된다. 전체적으로 한반도 남서부 지역의 지진원에서 단층 운동을 일으키는 주 압축 응력 방향은 ENE-WSW 또는 NE-SW 방향인 것으로 해석되며, 이 결과는 남한 내의 주요 지진에 대하여 알려진 주 응력장의 방향과 유사하다.

• ALGAE
• /
• 제33권3호
• /
• pp.231-241
• /
• 2018

Genetic continuity of Digenea simplex outside the Atlantic waters remains less studied, despite its long exposure to oriental folk medicine and wide distribution in tropical waters. Mitochondrial COI-5P and plastid rbcL sequences and morphology were investigated for plants from Mexico and additional specimens from Japan. Two new species, Digenea mexicana and Digenea rafaelii, are described for plants that would previously have been recognized as D. simplex in Mexico. D. mexicana grows to 10.5 cm tall and has cylindrical axes, irregular or di-, trichotomous branches, simple to branched determinate branchlets with eight pericentral cells, and tetrasporangia on inflated upper parts of determinate branchlets. It occurs intertidally in Quintana Roo, Yucatan Peninsula. D. rafaelii grows to 5 cm tall and has cylindrical axes, irregular or di-, trichotomous branches, and simple determinate branchlets with ten pericentral cells. It occurs intertidally in the Gulf of California. Both COI-5P and rbcL sequences revealed the genetic discontinuity between D. mexicana and D. rafaelii.