• Journal of the Korean Electrochemical Society
• /
• v.8 no.1
• /
• pp.24-31
• /
• 2005

Ion shower doping with a main ion source of $P_2H_x$ using a source gas mixture of $PH_3/H_2$ was conducted on excimer-laser-annealed (ELA) poly-Si.The crystallinity of the as-implanted samples was measured using a UV-transmittance. The measured value using UV-transmittance was found to correlate well with the one measured using Raman Spectroscopy. The sheet resistance decreases as the acceleration voltage increases from 1kV to 15kV at the moderate doping conditions. It, however, increases as the acceleration voltage increases under the severe doping conditions. The reduction in carrier concentration due to electron trapping at uncured damage after activation annealing seems to be responsible for the rise in sheet resistance. Three different annealing methods were investigated in terms of dopant-activation and damage-recovery, such as furnace annealing, excimer laser annealing, and rapid thermal annealing, respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.23-29
• /
• 2016

Zinc oxide of hexagonal wurzite, is known as n-type semiconductor. It has a wide band gap energy of 3.37 eV and large exciton binding energy of 60 meV. It can be widely applied to gas sensors, laser diodes, dye-sensitized solar cells and degradation of dye waste. The use of microwave hydrothermal synthesis brings a rapid reaction rate, high yield, and energy saving. Amine additives control the different particle shapes because of the chelate effect and formation of hydroxide ion. In this study, zinc nitrate hexahydrate was used as zinc precursor. In addition, ethanolamine, ethylenediamine, diethylenetriamine, and hexamethylenetetramine are used as shape control agent. The pH value was controlled as 11 by NaOH. The shapes of zinc oxide are star-like, rod, flower-like, and circular cone. In order to analyze physical, chemical, and optical properties of ZnO with diverse amine additives, we used XRD, SEM, EDS, FT-IR, UV-Vis spectroscopy, and PL spectroscopy.

• Journal of the Korean Chemical Society
• /
• v.36 no.3
• /
• pp.446-452
• /
• 1992

The rates of hydrolysis of aryl phenylacetates have been measured in the presence of piperidine in 80% acetonitrile-20% water(v/v). For the electron withdrawing substituents of leaving group, the hydrolysis is catalyzed by a general base and the Hammett $\rho_{LG}$ and Bronsted value $\beta$ are 5.28 and -2.72 at $30^{\circ}C$, respectively. These high senstivities of Hammett and Bronsted values are $E1_{C}B$ mechanism. But in the electron donating ones, the hydrolysis is catalyzed by a specific base and $B_{AC}2 mechanism is predominated. $pK_{SH}'s of phenylacetic acid ester and rate constants of hydrolysis $k_1$, $k_{-1)$, $k_2$ were calculated.

• KSBB Journal
• /
• v.13 no.3
• /
• pp.303-307
• /
• 1998

The fermentation conditions for the maximal production of the useful polysaccharides(water soluble polysaccharide and cell bound polysaccharide) from marine bacterium Zoogloea sp.(KCCM 10036) were investigated with a 5 L jar fermentor. The maximal production of these polysaccharides was obtained under the conditions of initial pH 7.8, 30$^{\circ}C$, 400 rpm of agitation speed, 2 Wm of aeration rate, 10%(w/v) of inoculum size and 2.5%(w/v) of glucose substrate and 10.38 g/L of total polysaccharide was produced. Apparent viscosity of the culture broth was increased with the production of these polysaccharides and the maximum value was reached to 22,500 cp.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.699-701
• /
• 2001

The expert system monitoring and diagnosing 765kV power apparatus was described in this paper. To develop this expert system, we studied the knowledge bases and data bases for 765kV transformer and GIS. In order to make the reliable inference of knowledge base and the good MMI(Man Machine Interface), the data bases were consisted of the tables of power apparatus information, limit level value, measured input data, inference result and diagnosis result. The knowledge base had various rules to infer the conditions of transformer and GIS. We applied both the forward chaining and backward chaining methods to these rules of system for good inferences. This paper describes the applied methods for expert system. Also, this developed system was tested with dissolved gas analyzing result and the result was shown.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.845-848
• /
• 2002

The study of photoconductor materials is demanded for development for flat-panel digital x-ray Imager. In this paper, We investigated the feasibility of application as x-ray image sensor using Cd(Zn)Te compound with high stopping power on high radiation. These Cd(Zn)Te samples were fabricated by vacuum thermal evaporation method to large area deposition and investigated I-V measurement as applied voltage. The experimental results show that the additional injection Zn in CdTe film reduced the leakage current, for the $Cd_{0.85}Zn_{0.15}Te$ detector, the net charge had the highest value as $144.58pC/cm^2$ at 30 V.

• Journal of Information Display
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2004

Ion shower doping with a main ion source of $P_2H_x$ using a source gas mixture of $PH_3/H_2$ was conducted on excimer-laser- annealed (ELA) poly-Si. The crystallinity of the as-implanted samples was measured using a UV-transmittance. The measured value of as-implanted damage was found to correlate well with the one calculated through/obtained from TRIM-code simulation. The sheet resistance was found to decrease as the acceleration voltage increased from 1 kV to 15 kV at a doping time of 1 min. However, it increases as the acceleration voltage increases under severe doping conditions. Uncured damage after furnace annealing is responsible for the rise in sheet resistance.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.345-351
• /
• 1999

The structures, the energetics, and the spectra of K+(H2O)3 have been studied at HF and MP2 levels with the basis set of triple-zeta plus two sets of polarization functions (TZ2P) for water molecules. Two structures considered are 3+0 (D3), and 2+1 (C2v). The 2+1 (C2v) has two hydrogen bonds between the primary hydration and the secondary hydration shell water molecules. They have similar binding energy and enthalpy. The most stable conformation of K+(H2O)3 is entropy driven as shown in Na+(H2O)5 and in Na+(H2O)6 cases. The 3+0 (D3) conformation is the most stable at 298 K and at 1 atm, based on Gibbs free energy changes (ΔGr). The thermal contributions to the enthalpy and the Gibbs free energy are corrected for the low frequency modes. The corrected ΔGr is in good agreement with the experimental value. Vibrational frequencies of two conformations are revealed as their characteristics.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.654-659
• /
• 2010

We have investigated the effect of rubrene-doped CuPc hole transport layer on the performance of p-i-n type bulk hetero-junction photovoltaic device with a structure of ITO/PEDOT:PSS/CuPc: rubrene/CuPc:C60(blending ratio 1:1)/C60/BCP/Al and have evaluated the current density-voltage(J-V) characteristics, short-circuit current($J_{sc}$), open-circuit voltage($V_{oc}$), fill factor(FF), and energy conversion efficiency(${\eta}_e$) of the device. By rubrene doping into CuPc hole transport layer, absorption intensity in absorption spectra decreased. However, the performance of p-i-n organic type bulk hetero-junction photovoltaic device fabricated with crystalline rubrene-doped CuPc was improved since rubrene shows higher bandgap and hole mobility compared to CuPc. Increased injection currents have effected on the performance improvement of the present device with energy conversion efficiency(${\eta}_e$) of 1.41%, which is still lower value compared to silicone solar cell and many efforts should be made to improve organic photovoltaic devices.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.695-699
• /
• 2012

The objective of this study was to set the optimal extraction condition of flavonoids from onion peels as a by-product generated from the onion industry without suitable processing. Four independent variables, affecting extraction conditions, which are solvent concentration ($X_1$), extraction temperature ($X_2$), pH of the solvent ($X_3$), and solvent ratio to onion peel ($X_4$) were optimized using response surface methodology (RSM). A model equation obtained from RSM is 0.772 of R-square and 0.278 of lack of fit (p>0.05) for the optimal extraction conditions. From the ridge analysis, the conditions flavoring the highest extraction were solvent concentration (v/v) of 70%, extraction temperature of $40^{\circ}C$, extraction solvent pH of 5.3, and a solvent ratio to onion peel ratio of 1:63 (w/v). The flavonoid content obtained under optimal conditions showed 302.63 mg/g, which is 1.12 times higher than the prediction value.