• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.2
• /
• pp.280-289
• /
• 2015

Anaerobic digestion is an efficient and renewable energy technology that can produce biogas from a variety of biomasses such as animal manure, food waste and plant residues. In developing countries this technology is widely used for the production of biogas using local biomasses, but there is little information about the value of these biomasses for energy production. This study was therefore carried out with the objective of estimating the biogas production potential of typical Vietnamese biomasses such as animal manure, slaughterhouse waste and plant residues, and developing a model that relates methane ($CH_4$) production to the chemical characteristics of the biomass. The biochemical methane potential (BMP) and biomass characteristics were measured. Results showed that piglet manure produced the highest $CH_4$ yield of 443 normal litter (NL) $CH_4kg^{-1}$ volatile solids (VS) compared to 222 from cows, 177 from sows, 172 from rabbits, 169 from goats and 153 from buffaloes. Methane production from duckweed (Spirodela polyrrhiza) was higher than from lawn grass and water spinach at 340, 220, and 110.6 NL $CH_4kg^{-1}$ VS, respectively. The BMP experiment also demonstrated that the $CH_4$ production was inhibited with chicken manure, slaughterhouse waste, cassava residue and shoe-making waste. Statistical analysis showed that lipid and lignin are the most significant predictors of BMP. The model was developed from knowledge that the BMP was related to biomass content of lipid, lignin and protein from manure and plant residues as a percentage of VS with coefficient of determination (R-square) at 0.95.This model was applied to calculate the $CH_4$ yield for a household with 17 fattening pigs in the highlands and lowlands of northern Vietnam.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.140-140
• /
• 2017

Nutritious and functional foods from crop have received great attention in recent years. Colored-grain wheat contains high phenolic compound and a large number of flavonoid. The anthocyanin and polyphenolic synthesis and accumulation is generally stimulated in response to biotic or abiotic stresses. Here, we analyzed genome wide transcripts in seedling of colored-grain wheat response to ABA and PEG treatment. About 900 and 1500 transcripts (p-value < 0.05) from ABA and PEG treatment were aligned to IWGSC1+popseq DB which is composed of over 110,000 transcripts including 100,934 coding genes. NR protein sequences of Poaceae from NCBI and protein sequence of transcription factors originated from 83 species in plant transcription factor database v3.0 were used for annotation of putative transcripts. Gene ontology analysis were conducted and KEGG mapping was performed to show expression pattern of biosynthesis genes related in flavonoid, isoflavonoid, flavons and anthocyanin biopathway. DroughtDB (http://pgsb.helmholtz-muenchen.de/droughtdb/) was used for detection of DEGs to explain that physiological and molecular drought avoidance by drought tolerance mechanisms. Drought response pathway, such as ABA signaling, water and ion channels, detoxification signaling, enzymes of osmolyte biosynthesis, phospholipid metabolism, signal transduction, and transcription factors related DEGs were selected to explain response mechanism under water deficit condition. Anthocyanin, phenol compound, and DPPH radical scavenging activity were measured and antioxidant activity enzyme assays were conducted to show biochemical adaptation under water deficit condition. Several MYB and bHLH transcription factors were up-regulated in both ABA and PEG treated condition, which means highly expressed MYB and bHLH transcription factors enhanced the expression of genes related in the biosynthesis pathways of flavonoids, such as anthocyanin and dihydroflavonols in colored wheat seedlings. Subsequently, the accumulation of total anthocyanin and phenol contents were observed in colored wheat seedlings, and antioxidant capacity was promoted by upregulation of genes involved in maintaining redox state and activation of antioxidant scavengers, such as CAT, APX, POD, and SOD in colored wheat seedlings under water deficit condition. This work may provide valuable and basic information for further investigation of the molecular responses of colored-grain wheat to water deficit stress and for further gene-based studies.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.422-428
• /
• 2006

Dentin bonding system have recently been developed in an effort to simplify and shorten bonding procedure. The intent of this study was to evaluate microleakage of newer generation of dentin bonding system comparing with other generations. Forty extracted human premolar teeth were randomly assigned to four groups for bonding : the 4th generation bonding system (Scotchbond Multi-Purpose). the 5th generation bonding system (Clearfil SE Bond), 6th generation bonding system (AQ bond) and 7th generation bonding $system(i-bond)^{TM}$ Class V cavities were prepared in buccal and lingual surface. The cavities were restored with composite resin (Z100) after the application of dentin bonding systems according to the instructions of the manufacturer Samples were thermocycled and immersed in methylene blue dye(2%). Each sample was sectioned with Isomet and evaluated for microleakage using stereomicroscopy. The mean value of the microleakage in 7th generation bonding system was greater than those of 4, 5, 6th generation dentin bonding system. Statistically, the mean values of microleakage between 4th and 7th generation bonding system were significantly different from each other (p<0.05).

• Microbiology and Biotechnology Letters
• /
• v.24 no.1
• /
• pp.9-18
• /
• 1996

Streptococcus mutans has been implicated as primary causative agents of dental caries by insoluble glucan (IG) in human and experimental animals. An attempt was made to search for the ${\alpha}$-1,3 glucanase that degrades IG produced by S. mutans. ${\alpha}$-1,3 glucanase was detected in the culture supernatant of microorganisms, which are isolated from soils on agar medium containing IG as a sole carbon source. This Streptomyces sp. hydrolysed IG produced by immobilized S. mutans and was named as Y9373. This enzyme required ${\alpha}$-1,3 glucan (IG) as an inducer. The optimum conditions for enzyme production were studied. The enzyme was purified by 30~70% $(NH_4)_2SO_4$ precipitation, anion exchange chroma tography on DEAE-cellulose and gel filtration on Sepadex G-75. The purified enzyme has a specific activity of 7840.0 U/mg protein giving 32.1-fold purification and final yield of 0.53%. The molecular weight was estimated to be about 22.5 kDa by SDS-PAGE. The optimum pH and temperature for enzyme reaction were 6.5 and 37$^{\circ}C$, respectively and the enzyme was relatively stable at the temperature below 60$^{\circ}C$. The activity of purified enzyme was enhanced by adding $Co^{2+},\;Mn^{2+}\;and\;Mg^{2+}$ into the medium, whereas inhibited by adding $Hg^{2+},\;Zn^{2+}$ and SDS. The $K_m\;and\;V_{max}$ value of ${\alpha}$-1,3 glucanase for IG were estimated to be 2.50 mM and 0.0431 mM/min, respectively. The thin layer chromatographic analysis of hydrolysates from IG with ${\alpha}$-1,3 glucanase showed that glucose was the main product of reaction. This enzyme activity was about 14 times higher than marketing dextranase as preventive agent against artificial dental caries by S. mutans in TH medium including 5% sucrose after 30 minutes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.362-362
• /
• 2014

Atomic layer deposition (ALD) can be regarded as a special variation of the chemical vapor deposition method for reducing film thickness. ALD is based on sequential self-limiting reactions from the gas phase to produce thin films and over-layers in the nanometer scale with perfect conformality and process controllability. These characteristics make ALD an important film deposition technique for nanoelectronics. Tantalum pentoxide ($Ta_2O_5$) has a number of applications in optics and electronics due to its superior properties, such as thermal and chemical stability, high refractive index (>2.0), low absorption in near-UV to IR regions, and high-k. In particular, the dielectric constant of amorphous $Ta_2O_5$ is typically close to 25. Accordingly, $Ta_2O_5$ has been extensively studied in various electronics such as metal oxide semiconductor field-effect transistors (FET), organic FET, dynamic random access memories (RAM), resistance RAM, etc. In this experiment, the variations of chemical and interfacial state during the growth of $Ta_2O_5$ films on the Si substrate by ALD was investigated using in-situ synchrotron radiation photoemission spectroscopy. A newly synthesized liquid precursor $Ta(N^tBu)(dmamp)_2$ Me was used as the metal precursor, with Ar as a purging gas and $H_2O$ as the oxidant source. The core-level spectra of Si 2p, Ta 4f, and O 1s revealed that Ta suboxide and Si dioxide were formed at the initial stages of $Ta_2O_5$ growth. However, the Ta suboxide states almost disappeared as the ALD cycles progressed. Consequently, the $Ta^{5+}$ state, which corresponds with the stoichiometric $Ta_2O_5$, only appeared after 4.0 cycles. Additionally, tantalum silicide was not detected at the interfacial states between $Ta_2O_5$ and Si. The measured valence band offset value between $Ta_2O_5$ and the Si substrate was 3.08 eV after 2.5 cycles.

• Radiation Oncology Journal
• /
• v.8 no.1
• /
• pp.1-6
• /
• 1990

In the present study, a perfluorchemical emulsion (Fluosol-DA $20\%$) did not alter $D_o\;and\;D_q$ values on cell survival curve, indicating that the lack of a direct effect of Fluosol-DA $20\%$ on cellular radiosensitivity in vitro. The effect of Fluosol-DA $20\%$ injection in combination with carbogen breathing was determined on the hypoxic cell fraction in SCK tumors. The hypoxic cell fraction in control SCK tumors was 0.39. This value decreased to 0.05 when the mice were i.v. injected with 12 ml/kg of Fluosol-DA $20\%$ in a carbogen atomosphere. The measured mean and median $PO_2$ values with a microelectrode in the control tumors was 9 mmHg and 4 mmHg, respectively. The treatment of the SCK tumors in the host mice with injected Fluosol-DA $20\%$ in combination with carbogen breathing increased the mean and median $PO_2$ values to 67 mmHg and 62 mmHg, respectively. Using carbogen breathing alone caused a moderate increase of tumor $PO_2$. But Fluosol-DA $20\%$ injection alone caused little change $PO_2$ in the tumor. It was concluded that the combination of Fluosol-DA injection and carbogen breathing is an effective means to improve oxygenation of tumors.

• Applied Biological Chemistry
• /
• v.13 no.1
• /
• pp.65-72
• /
• 1970

Two peptides (Im pr-M, Im ch-M) derived from Im ${\lambda}-type$ of Bence Jones Protein and one peptide (Ikch-M) from Ik were separated and purified using the Dowex $50{\times}2$ column $(1{\times}20\;cm)$ and Dowex $1{\times}2(0.9{\times}50\;cm)$. The buffer solution was composed of 1% pyridine and IM formic acid in Dowex $1{\times}2$ column. The blocked N-terminal was examined with ninhydrin reaction before and after alkaline hydrolysis, which was fractionated by Dowex $1{\times}2$ column. Pyrro-glutamic acid in N-terminal residue was identified by comparing with the authentic pyrro-glutamic acid through a high voltage electrophoresis (pH 3.5, 3000 V.) after the peptide Im pr-M (PCA. Ser) was cleavaged at the position of serine with cone. (12 N) HCl and the pyrro-glutamic acid was converted to glutamic acid by treating it with N-NaOH for 116 hours at $27^{\circ}C$. The substractive method was applied to find out the sequence of peptides and carboxypeptidase A was employed to release C-terminal residue from the peptide. In present study PCA. Ser in Im Pr-M was isolated from the pronase digested ${\lambda}$-type Bence Jones protein. The yield of the Im Pr-M was 79.6 percent of its theoretical value, based on the molecular weight of Bence Jones Protein. Im ch-M (PCA. Ser Val. Leu) was isolated from the chymotrypsin digested ${\lambda}$-type Bence Jones Protein. The yield of the Im ch-M was 72.2 percent. based on the molecular weight of Bence Jones Protein. Ik ch-M (PCA. Ser. Ala. Leu) was isolated from the chymotrypsin digested ${\lambda}$-type Bence Jones Protein and its yield was 42% based on the molecular weight of Bence Jones Protein.

• Journal of Periodontal and Implant Science
• /
• v.34 no.3
• /
• pp.551-562
• /
• 2004

The purpose of this study was to evaluate the effects of negatively electric field on bone healing in rabbit segmental long bone defects using negatively charged PTFE membrane. Ten millimeter segmental defects in the rabbit radius were used as the experimental model. After membranes were then charge injected using a corona-charging apparatus, the left defects were covered with non charged PTFE membranes as control groups, whereas the right defect was covered with negatively charged PTFE membranes as test group. The animals were divided into 4 groups of 2 rabbits each, and sacrificed at 2, 4, 6, and 8 weeks. Histomorphometric analysis showed a more newly formed bone in negatively charged membrane at early healing period. At 2 weeks, the proportion of new bone formation to total defect area was 0.32% in control group, 1.10% in experimental group. At 4 weeks, the proportion of new bone formation to total defect area was 6.86% in control, and 13.75% in experimental. At 6 and 8 weeks, no obvious difference was found between the two groups but newly formed bone in test groups were slightly more than that in control groups. In conclusion, negatively charged membranes showed more newly bone tissue than noncharged membranes at an early healing period. Although the number of samples was small, this study showed that the combination of negatively electrical stimulation and P1FE membrane may be of value in long bone healing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.236-236
• /
• 2008

(Bi,La)$Ti_3O_{12}$(BLT) thin film is one of the most attractive materials for ferroelectric random access memory (FRAM) applications due to its some excellent properties such as high fatigue endurance, low processing temperature, and large remanent polarization [1-2]. The authors firstly investigated and reported the damascene process of chemical mechanical polishing (CMP) for BLT thin film capacitor on behalf of plasma etching process for fabrication of FRAM [3]. CMP process could prepare the BLT capacitors with the superior process efficiency to the plasma etching process without the well-known problems such as plasma damages and sloped sidewall, which was enough to apply to the fabrication of FRAM [2]. BLT-CMP characteristics showed the typical oxide-CMP characteristics which were related in both pressure and velocity according to Preston's equation and Hernandez's power law [2-4]. Good surface roughness was also obtained for the densification of multilevel memory structure by CMP process [3]. The well prepared BLT capacitors fabricated by CMP process should have the sufficient ferroelectric properties for FRAM; therefore, in this study the electrical properties of the BLT capacitor fabricated by CMP process were analyzed with the process parameters. Especially, the effects of CMP pressure, which had mainly affected the removal rate of BLT thin films [2], on the electrical properties were investigated. In order to check the influences of the pressure in eMP process on the ferroelectric properties of BLT thin films, the electrical test of the BLT capacitors was performed. The polarization-voltage (P-V) characteristics show a decreased the remanent polarization (Pr) value when CMP process was performed with the high pressure. The shape of the hysteresis loop is close to typical loop of BLT thin films in case of the specimen after CMP process with the pressures of 4.9 kPa; however, the shape of the hysteresis loop is not saturated due to high leakage current caused by structural and/or chemical damages in case of the specimen after CMP process with the pressures of 29.4 kPa. The leakage current density obtained with positive bias is one order lower than that with negative bias in case of 29.4 kPa, which was one or two order higher than in case of 4.9 kPa. The high pressure condition was not suitable for the damascene process of BLT thin films due to the defects in electrical properties although the better efficiency of process. by higher removal rate of BLT thin films was obtained with the high pressure of 29.4 kPa in the previous study [2].

• Food Science and Preservation
• /
• v.5 no.4
• /
• pp.326-330
• /
• 1998

Freeze storage technique is widely used for food processing to keep freshness and quality of the product. This technique was applied to fresh, unshelled groundnut to develop a new type of product which could maintain fresh taste and nutritive values even after several months of storage. The groundnut varieties, Daepungtangkong, Daekwangtangkong and Sindaekwangtangkong were grown at the experimental field of NCES in 1996. Immatured pods or groundnut were harvested around 20 to 3o days before full maturity, washed, and steamed at 100$^{\circ}C$ for 5 min. to stop enzyme activity. After vacuum packing (at -760mmHg for 10 min.) with 0.08mm polyvinyldichloride film, the pods were immediately frozen at -70$^{\circ}C$ for 24h and transfered at -20$^{\circ}C$ for long-term storage. Physico-chemical properties of frozen vegetable groundnut were investigated at 2 months after storage and compared to those of conventionally dried groundnut. After 2 months storage, the thawed kernels were very palatable with softness and fresh taste. Acid value and hardness (measured as the compression force on the probe of a texture analyzer) were much lower in frozen vegetable groundnut than those in the air-dried ones. Presence of free sugars is one of the important factors affecting groundnut taste, and the free sugar contents were considerably decreased in the frozen vegetable groundnut compared to freshly harvested groundnut. But in dried groundnut no free sugar was detected.