• Journal of Environmental Science International
• /
• v.12 no.6
• /
• pp.665-676
• /
• 2003

To investigate the chemical characteristics of PM$\_$2.5/ in Seoul, Korea, atmospheric particulate matters were collected using a PM$\_$10/ dichotomous sampler including PM$\_$10/ and PM$\_$2.5/ inlet during the period of October 2000 to September 2001. The Inductively Coupled Plasma-Mass Spectromety (ICP-MS), ion Chromatography (IC) methods were used to determine the concentration of both metal and ionic species. A statistical analysis was performed for the heavy metals data set using a principal component analysis (PCA) to derived important factors inherent in the interactions among the variables. The mean concentrations of ambient PM$\_$2.5/ and PM/sub10/ were 24.47 and 45.27 $\mu\textrm{g}$/㎥, respectively. PM$\_$2.5/ masses also showed temporal variations both yearly and seasonally. The ratios of PM$\_$2.5/PM$\_$10/ was 0.54, which similar to the value of 0.60 in North America. Soil-related chemical components (such as Al, Ca, Fe, Si, and Mn) were abundant in PM$\_$10/, while anthropogenic components (such as As, Cd, Cr, V, Zn and Pb) were abundant in PM2s. Total water soluble ions constituted 30∼50 % of PM$\_$2.5/ mass, and sulfate, nitrate and ammonium were main components in water soluble ions. Reactive farms of NH$_4$$\^$+/were considered as NH$_4$NO$_3$ and (NH$_4$)$_2$SO$_4$ during the sampling periods. In the results of PCA for PM$\_$2.5/, we identified three principal components. Major contribution to PM$\_$2.5/ seemed to be soil, oil combustion, unidentified source. Further study, the detailed interpretation of these data will need efforts in order to identify emission sources.

• The korean journal of orthodontics
• /
• v.36 no.2 s.115
• /
• pp.145-152
• /
• 2006

The purpose of this study was to evaluate electroless plating as a method of increasing the diameter of an orthodontic wire in comparison with eletroplating. After pretreatment plating of the 0.016 inch stainless steel orthodontic wire, electroless plating was performed at $90^{\circ}C$ until the diameter of the wire was increased to 0.018 inch. During the process of electroless plating, the diameter of the wire was measured every 5 minutes to examine the increasing ratio of the wire's diameter per time unit. And to examine the uniformity, the diameter at 3 points on the electroless-plated orthodontic wire was measured. An X-ray diffraction test for analyzing the nature of the plated metal and a 3-point bending test for analyzing the physical property were performed. The electroless-plated wire group showed a increased tendency for stiffness, yield strength, and ultimate strength than the electroplated wire group. And there was a statistically significant difference between the two groups for stiffness and ultimate strength. In the electroless-plated wire group, the increasing ratio of the diameter was $0.00461{\pm}0.00003mm/5min$ (0.00092 mm/min). In the electroplated wire group, it was $0.00821{\pm}0.00015mm/min$. The results of the uniformity test showed a tendency for uniformity in both the plating methods. The results of this study suggest that electroless plating of the wire is closer to the ready-made wire than electroplating wire in terms of the physical property. However, the length of plating time needs further consideration for the clinical application of electroless plating.

• Journal of Animal Environmental Science
• /
• v.14 no.2
• /
• pp.119-128
• /
• 2008

This experiment was conducted to investigate the effects of concentrated pig slurry using membrane filter on growth of tomato in nutriculture. Pig slurry was filtered by ultra filtration and concentrated by reverse osmosis process. Filtration of pig slurry was necessary to prevent the hose clogging in nutriculture. The concentrated pig slurry (CS) and nutrient solution (NS) were mixed by six different mixing ratios of 0:100, 20:80, 40:60, 60:40%, 80: 20 and 100%:0% based on nitrogen content. The chemical nutrient solution was the solution of National Horticulture Research Station for the growth of tomato. The concentration of nutrient solution was adjusted a range of $1.6{\sim}2.0mS/cm$ in EC. The plant height of tomato treated with CS 20+NS 80% was similar with NS 100% control plot. Plant height was highest in the plot of CS 20+NS 80%. The treatment of 100% concentrated pig slurry was lowest in the gowth characteristics of tomato. Number of cluster was very lower in 100% concentrated pig slurry compared with plot of chemical nutrient solution. In the beginning of growth stage, SPAD reading value was reduced in plot treated with CS 100%, but CS 20+NS 80% plot was higher compared to 100% concentrated pig slurry. SPAD value of tomato leaves was decreased as the amount of CS was increased. The SPAD value also in treatment of concentrated pig slurry was lower in the middle growth stage compared to control plot. The dry weight of stem and leaf were 107.4, 104.2g in plot of NS 100% and CS 20%+NS 80%, respectively. The fruit number and weight were decreased at high application plots of concentrated pig slurry, The fruit setting of tomato showed lowest in the plot treated with 100% concentrated pig slurry, and the growth of tomato severely decreased after application of 100% CS treatment. In conclusion, the growth characteristics such as plant height and fruit weight of tomato were not significantly different between the plots treated with mixture of 20% CS +80%NS and 100% nutrient solution treatment. In conclusion, the mixture solution of 20% of concentrated pig slurry and 80% of nutrient solution could be used as a nutrition solution of tomato nuticulture.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.10
• /
• pp.1353-1360
• /
• 2011

This study was performed to investigate the antimicrobial effects against food-borne pathogens and antioxidant activity of Rhododendron brachycarpum ethanol-extract. The antimicrobial activity of the extract was determined using a paper disc-diffusion method, and the diameter of the clear zone was measured. The diameter of the clear zone in the presence of 10 mg of extract was maximal against Bacillus cereus among the three tested Gram-positive bacteria and against Escherichia coli O157:H7 among the five tested Gram-negative bacteria. Analysis of the minimum inhibitory concentration (MIC) showed that the extract exhibited a similar efficacy as that of sorbic acid, a well-known chemical preservative. The growth inhibitory effects of the extract at concentrations of 250, 500, 1,000, and 2,000 mg/L on food-borne pathogens were determined against Staphylococcus aureus, Listeria monocytogenes, Salmonella Typhimurium, and Escherichia coli O157:H7. Growth of the microorganisms was not affected by the extract at concentrations up to 250 mg/L, but it was significantly (p<0.05) inhibited by the extract at concentrations higher than 1,000 mg/L. The antioxidant effects of the extract were examined via measurement of DPPH radical scavenging activity, inhibition of reactive oxygen species (ROS) generation using fluorescent dichlorofluorescien (DCF) assay, and prevention of peroxyl radical- and hydroxyl radical-induced supercoiled DNA breakage. The $IC_{50}$ of the extract for DPPH radical scavenging activity was about half that of ${\alpha}$-tocopherol, which was used as a positive control. DCF fluorescence intensity decreased as the concentration of the extract increased, demonstrating that ROS generation was inhibited in a concentration-dependent manner. The ROS inhibitory effect of the extract was higher than that of ascorbic acid. The extract prevented supercoiled DNA strand breakage induced by peroxyl radical and hydroxyl radical. Thus, the results of the present study demonstrate that the extract exhibits antimicrobial effects against food-borne pathogens as well as potent antioxidant capacity, suggesting that R. brachycarpum could be used as a natural antibacterial agent and effective antioxidant in food.

• Journal of Food Hygiene and Safety
• /
• v.26 no.1
• /
• pp.25-30
• /
• 2011

In this study, predictive mathematical models were developed to predict the kinetics of Listeria monocytogenes growth in the mixed fresh-cut vegetables, which is the most popular ready-to-eat food in the world, as a function of temperature (4, 10, 20 and $30^{\circ}C$). At the specified storage temperatures, the primary growth curve fit well ($r^2$=0.916~0.981) with a Gompertz and Baranyi equation to determine the specific growth rate (SGR). The Polynomial model for natural logarithm transformation of the SGR as a function of temperature was obtained by nonlinear regression (Prism, version 4.0, GraphPad Software). As the storage temperature decreased from $30^{\circ}C$ to $4^{\circ}C$, the SGR decreased, respectively. Polynomial model was identified as appropriate secondary model for SGR on the basis of most statistical indices such as mean square error (MSE=0.002718 by Gompertz, 0.055186 by Baranyi), bias factor (Bf=1.050084 by Gompertz, 1.931472 by Baranyi) and accuracy factor (Af=1.160767 by Gompertz, 2.137181 by Baranyi). Results indicate L. monocytogenes growth was affected by temperature mainly, and equation was developed by Gompertz model (-0.1606+$0.0574^*Temp$+$0.0009^*Temp^*Temp$) was more effective than equation was developed by Baranyi model (0.3502-$0.0496^*Temp$+$0.0022^*Temp^*Temp$) for specific growth rate prediction of L.monocytogenes in the mixed fresh-cut vegetables.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.2
• /
• pp.121-128
• /
• 1999

This experiment was carried out to establish effective weed control system in the cultivation of Coix lachryma-jobi L. The effect of annual weeds artificially transplanted on the growth of Coix lachryma-jobi L. were that the higher the density of weeds, the lower the yield considerably by reducing number of grains and tillers per plant. Among four weeds of Echinochloa crusgalli galli P. BEAUV., Digitaria sanguinalis $S_{COPOL}$., Chenopodium album L., and Portulaca oleracea L., weed of Portulaca oleracea L. reduced adlay yield most by 182.6kg/10a and it was judged to be the most injurious weed to adlay production. Among four weed control systems, which are one herbicide treatment, one herbicide treatment + one cultivating work with cultivator, two times cultivating work with cultivator and two times hand-weeding, the control system of 'one herbicide treatment + one cultivating work with cultivator' showed the lowest amount of weed growth by 7.34 weeds per $m^2$ in comparison with control plot of 35.00 weeds per $m^2$. Among four weed control systems, the system of 'two times hand-weeding' had much more amount of light penetration in adlay canopy with 791.9 mol than any other systems.

• Journal of The Korean Association For Science Education
• /
• v.24 no.3
• /
• pp.532-543
• /
• 2004

The teacher appointment examination is consisted of a written test, an interview, a demonstration of teaching practices, one's academic record etc. The primary written test(full credit of 100) consists of multiple-choice test of general pedagogy(30%) and constructed response test of science(70%). The science test consists of science education($20{\sim}30%$) and science content($70{\sim}80%$). Five science exams were implemented for appointing general science, physics, chemistry, biology and earth science teachers in 2002 and 2003. The credits alloted to science education domain decreased from $25.7{\sim}30%$ in 2002 to $24.3{\sim}25.7%$ in 2003. The percentage of correct answer was similar between science education and science content domain in 2002, but the percentage of correct answer in science education domain(70.2%) was 29.8% higher than that of science content domain in 2003. Earth science exam almost reached the target mean score of 60 but the other four exams showed the mean scores ranging from 45.0 to 52.7 in 2002 and from 40.1 to 49.6 in 2003. The percentage of high difficulty items(p<40%) was 41.2% in physics and chemistry in 2002, 50% in physics and chemistry, and 45% in biology in 2003. Seventy eight percent of the items showed fairly high discrimination index(r>.30). In addition, the reliabilities of 5 tests were from .79 to .88. In conclusion, it is recommended that the credits alloted to science education domain should be increased up to 30%, and exam difficulties should be lowered to a proper level by making science content items easier.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.25 no.3
• /
• pp.79-87
• /
• 2019

The degree of cosmetic's oxidation depends on the storage conditions and external conditions when using the product. The microbial contamination and oxygen exposure often results in the quality deterioration of cosmetics. In addition, the problem is that consumers often use cream-type cosmetics, which have short expiration period (6-12 months), even after the product is expired. When using the deteriorated cosmetics, it can be fatal to consumers' safety including some symptoms such as folliculitis, rashes, edema, and dermatitis. Therefore, it is necessary to develop sealed smart packaging for cosmetics to prevent the deterioration of cosmetics and improve consumer safety. In this study, we have developed smart packaging design for cosmetics that can measure the surrounding environment and expiration date for the cosmetics in the real time. In addition, the smart packaging includes sensor, which are linked to the mobile application. Users can find out the measurement results through the application. Also, the packaging design and functions were set up based on the survey results by the user and feasible model can be produced based on user choice. The measurement in the three environment has been done after manufactured the sensor, PCB, and mobile application. As a result, it works normally within a certain range under all three environmental conditions. It is believed that the information on expiration dates and storage environment can be efficiently delivered to the consumers through developed cosmetics smart packaging and applications. The development of UI/UX design for consumer is further studied. The UX/UI design of the application plays an essential role in achieving this goal through the commercialization the cosmetic products in the wide range.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.6 no.3
• /
• pp.532-543
• /
• 1999

This study was conducted to provide the basic data necessary for the improvement of the teaching method for basic nursing practice as well as the effectiveness of the practice by examining the students' competency in cleansing enema after doing the self study instead of the traditional education. To examine the competency in cleansing enema after the self study, this study is an one group pretest-posttest design that subjects did the enema practice through the self study. The subjects were 89 sophomore students at Y University. College of Nursing. In basic nursing lab practice class, cleansing enema self study module was given to the students which was developed by the researcher based on the literature review and asked them to finish doing the pre study and checking the self study evaluation criteria after reading the goal, learning activities and theoretical guideline. After watching the video tape, students practiced the process in the module by themselves. For the competency in cleansing enema. repeated autonomous practices were done during the open lab other than the regular class. Whenever the practice was done, the frequency and time were measure and documented. When the student felt confident through repeated practices, the competency was evaluated by the researcher and two assistants based on the evaluation criteria. And the process was repeated till the student could perform all the items on evaluation criteria completely. The data were collected for 42 days from Oct. 15 to Nov. 26 in 1996. Collected data were analyzed by frequency, percentage, Pearson correlation coefficient and variance analysis. The results are summarized as follows : 1. 43.2% of the students were favorable to nursing and 63.6% like lecture, but 71.6% like practice. So they were more interested in practice than in lecture. 2. 62.3% of the students scored high in written test, 97.8% scored high in practice. So the practice score was better. 3. The frequency of repeated practice to pass the test ranged from 1 to 4 and the average is 2.2. 4. The average time needed in preparation and the performance was nearly the same regardless of the frequency. It took 5 to 38 minutes for those who passed the test after practicing once and the average was 16 minutes. 5 to 60 minutes were taken for those who practiced twice to pass the test and the average was 21 minutes. Those who passed the test after three practices needed 8 to 30 minutes and the average was 15 minutes, which was similar to the time that the students who passed the test for the first trial. Only one student passed the test after 4 practices and it took 10 minutes. 5. 64% of the students agreed that the context and the content of the module were appropriate for the self study and 68.2% were satisfied. And 71.9% said that the module helped them to practice the enema self study 6. Though only 42% of the students were satisfied with the video. 50.6% said that it was helpful for the self study. 7. 52.3% of the students were satisfied with the self study method, and 86.6% obtained self-confidence when performing the enema. 8. The lower the student's practice score was, the more practices were needed for them to pass the test(r=-.213, P<.05). As a result, for performing the enema practice competently, two or more practice opportunities were needed to be given. And it is possible to obtain the less complex nursing skills through the self study, when enough learning resources and assistance such as learning guidance or video tapes are provided. Based on this study. I want to suggest that. 1. There must be college policy that can support the new method instead of the traditional learning method for the students to attain the proficiency in basic nursing skills. 2. The assistant materials should be developed as soon as possible to promote the self study of basic nursing skills.

• Korean Journal of Food Science and Technology
• /
• v.39 no.4
• /
• pp.372-379
• /
• 2007

A high-performance liquid chromatography-electrospray ionization (HPLC-ESI) tandem MS was developed for the rapid and simultaneous determination of forbidden medicines in dietary supplements. Thirteen medicinal components such as PDE-5 inhibitors and their analogues, and the newly identified dimethylsildenafil and xanthoanthrafil, were included in this study. After tentative standardization of molecular ions in both polarities using thirteen references on the mass spectrometer, with ESI-continuous infusion via the syringe pump method, the relative intensity of the ions present in the resulting spectra was quantitatively compared. From the results, the ion mode was selected depending on each reference's characteristics. A HPLC method coupled with the ESI mode was developed considering the matrix effect and interference depending on the type of sample. The validation test of the developed method was followed by carrying out precision, accuracy, recovery, sensitivity and linearity, etc. The method showed sufficiently high sensitivity, reproducibility, and specificity, and produced 4 times faster results when compared with the existing HPLC/UV method for the determination of forbidden compounds in dietary supplements.