• East Asian mathematical journal
• /
• 제19권1호
• /
• pp.133-150
• /
• 2003

This paper will show that the relation (1.1) $$L^1({\Omega}){\subset}C_0(\bar{\Omega}){\subset}H_{p,q}$$ if 1/p'-1/n(1-2/q')<0 where p'=p/(p-1) and q'=q/(q-1) where $H_{p.q}=(W^{1,p}_0,W^{-1,p})_{1/q,q}$. We also intend to investigate the control problems for the retarded systems with $L^1(\Omega)$-valued controller in $H_{p,q}$.

• 소음진동
• /
• 제8권5호
• /
• pp.964-973
• /
• 1998

본 논문에서 자기 축수 시스템의 부상과 불평형 보상 제어기를 제안한다. 특정한 동작속도에서 불균형 진동과 부상을 제어하기위해 우리는 이산시간 Q 매개변수화 제어를 사용한다. 회전자의 속도가 p=0일 때, 회전소도와 같은 주파수로 회전자의 불균형은 없다. 그래서 부상을 만들기 위해 우리는 제어기가 z=1의 단위원에서 극점을 가지는 Q매개변수화 Q를 선택한다. 그러나 회전자의 속도가 p$\neq$0일 때, 회전속도와 같은 주파수로 정현파의 외란이 존재하게 된다. 그래서 이 외란의 점근적인 소멸을 하기위해 Q 매개화변수 제어기 자유 변수 Q가 제어기가 어떠한 회전속도 p에 대한 z=expjpTs에 있는 단위 원에서 극점을 가지도록 선택된다. 첫째로, 우리는 이 연구에서 적용된 실험적인 구성을 소개한다. 두 번째로, 우리는 차분 방정식의 형태로 자기축수 시스템의 수학적인 모델을 제안한다. 세 번째로 우리는 제안된 이산 시간 Q매개변수화 제어기 설계방법을 설명한다. 제어기의 자유 매개변수 Q는 안정한 전달함수가 된다고 가정한다. 네 번째로, 우리는 설계목적을 만족하는 자유 매개변수가 복잡한 최적문제를 풀기보다는 선형 방정식을 구함으로서 만족될 수 있다. 마지막으로 몇 개의 시뮬레이션과 실험적인 결과가 제언된 제어기를 평가하기 위해 구해진다. 획득된 결과는 회전설계 속도에서의 불균형 진동을 제어하는 제안된 제어기의 효과를 나타낸다.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1923-1928
• /
• 2010

The IEC 61850 protocol proposed for the interoperability between IEDs(intelligent electronic devices) adopts the prioritized switched ethernet as its communication channel because substation bus is utilized to exchange both real-time and non real-time messages. The prioritized switched ethernet uses IEEE 802.1Q/p QoS(Quality of Service) in addition to IEEE 802.3 ethernet to enhance the real-time characteristics. However, IEEE 802.1Q/p QoS has priority-blocking problem that occurs when higher-priority frame transmission request during lower-priority frame transmission. To resolve this problem, this paper proposes P(Preemptive)-Ethernet. P-Ethernet uses the modified IEEE 802.1Q/p frame format and new priority preemption mechanism. This paper also implements P-Ethernet controller using FPGA (Virtex-4) and MicroBlaze processor. From the implementation results, P-Ethernet controller shows a improved latency and jitter of transmission period compare to the normal ethernet controller.

• 한국통신학회논문지
• /
• 제17권12호
• /
• pp.1333-1342
• /
• 1992

본 논문은 제어 입력 u(t)에 대하여 비선형 결합된 3차 미분 방정식으로 표현되는 조작기를 갖는 로보트 매니퓰레이터에 대하여 제어기의 설계에 관한 논문이다. 제어 방식은 두 단계로 구성되며, 첫째 단계로는 비결합된 제어가능한 선형 계통을 얻기 위하여 대역적(global)선형화를 수행하며, 둘째 단계로는 선형화 계통에 대하여, 모델의 불확실성이 존재하는 경우에도 강건성과 안정도를 보장하도록 Lyapunov 방정식과 전체 안정도 이론을 적용하여 제어기를 설계한다. 제안된 제어기를 조작기가 포함된 자유도가 3인 로보트 매니퓰레이터에 대하여 컴퓨터 시뮬레이션을 하였다.

• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.821-829
• /
• 2012

This research article presents a novel approach based on an instantaneous active and reactive power component (p-q) theory for generating reference currents for shunt active filter (SHAF). Three-phase reference current waveforms generated by proposed scheme are tracked by the three-phase voltage source converter in a hysteresis band control scheme. The performance of the SHAF using the p-q control strategy has been evaluated under various source conditions. The performance of the proposed control strategy has been evaluated in terms of harmonic mitigation and DC link voltage regulation. In order to maintain DC link voltage constant and to generate the compensating reference currents, we have developed Fuzzy logic controller with different (Trapezoidal, Triangular and Gaussian) fuzzy M.F.s. The proposed SHAF with different fuzzy M.F.s is able to eliminate the uncertainty in the system and SHAF gains outstanding compensation abilities. The detailed simulation results using MATLAB/SIMULINK software are presented to support the feasibility of proposed control strategy. To validate the proposed approach, the system is also implemented on a real time digital simulator and adequate results are reported for its verifications.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.263-268
• /
• 1990

This paper deals with the manipulator with actuator described by equation D over bar(q) $q^{...}$ = u-p over bar (q, $q^{.}$, $q^{..}$) with a control input u. We imploy a simple method of control design which bas two stages. First, a global linearization is performed to yield a decoupled controllable linear system. Then a controller is designed for this linear system. We provide a rigorous analysis Of the effect of uncertain dynamics, which we study using robustness results In time domain based on a Lyapunav equation and the total stability theorem. I)sing this approach we simulate the performance of controller about a robotic manipulator with actuator.tor.r.

• 한국항해항만학회지
• /
• 제47권2호
• /
• pp.75-84
• /
• 2023

Ships need to ensure safety during their navigation, which makes route determination highly important. It must be accompanied by a route following controller that can accurately follow the route. This study proposes a method for automatically generating the ship route based on deep reinforcement learning algorithm and following it using a route following controller. To generate a ship route, under keel clearance was applied to secure the ship's safety and navigation chart information was used to apply ship navigation related regulations. For the experiment, a target ship with a draft of 8.23 m was designated. The target route in this study was to depart from Busan port and arrive at the pilot boarding place of the Ulsan port. As a route following controller, a velocity type fuzzy P ID controller that could compensate for the limitation of a linear controller was applied. As a result of using the deep Q network, a route with a total distance of 62.22 km and 81 waypoints was generated. To simplify the route, the Douglas-Peucker algorithm was introduced to reduce the total distance to 55.67 m and the number of way points to 3. After that, an experiment was conducted to follow the path generated by the target ship. Experiment results revealed that the velocity type fuzzy P ID controller had less overshoot and fast settling time. In addition, it had the advantage of reducing the energy loss of the ship because the change in rudder angle was smooth. This study can be used as a basic study of route automatic generation. It suggests a method of combining ship route generation with the route following control.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1303-1313
• /
• 2014

Dynamic behavior of the harmonic detection part of an active power filter (APF) has an essential role in filter compensation performances during transient conditions. Instantaneous power (p-q) theory is extensively used to design harmonic detectors for active filters. Large overshoot of p-q theory method deteriorates filter response at a large and rapid load change. In this study the harmonic estimation of an APF during transient conditions for balanced three-phase nonlinear loads is conducted. A novel fuzzy instantaneous power (FIP) theory is proposed to improve conventional p-q theory dynamic performances during transient conditions to adapt automatically to any random and rapid nonlinear load change. Adding fuzzy rules in p-q theory improves the decomposition of the alternating current components of active and reactive power signals and develops correct reference during rapid and random current variation. Modifying p-q theory internal high-pass filter performance using fuzzy rules without any drawback is a prospect. In the simulated system using MATLAB/SIMULINK, the shunt active filter is connected to a rapidly time-varying nonlinear load. The harmonic detection parts of the shunt active filter are developed for FIP theory-based and p-q theory-based algorithms. The harmonic detector hardware is also developed using the TMS320F28335 digital signal processor and connected to a laboratory nonlinear load. The software is developed for FIP theory-based and p-q theory-based algorithms. The simulation and experimental tests results verify the ability of the new technique in harmonic detection of rapid changing nonlinear loads.

• 전력전자학회논문지
• /
• 제4권1호
• /
• pp.26-34
• /
• 1999

비선형 반도체 전력변화장치의 사용이 급증함에 따라 전원 측에 발생되는 고조파 및 무효전력을 보상하기 위한 능동전력필터에 관한 연구가 많이 이루어져 왔으며 실용화를 위한 노력이 계속 되고 있다. 그러나 수동필터 대비 능동전력필터의 가격이 아직까지는 고가이기 때문에 이의 상용화가 더디게 진전되고 있는 추세이며, 특히 소·중용량의 능동전력필터의 제어를 위하여 디지털 신호 처리용 프로세서인 DSP(digital signal processor)를 사용하는 경우 아직까지 그 가격이 고가이기 때문에 능동필터의 제어가격을 상승시키는 요인으로 작용한다. 한편 능동전력필터의 가격을 낮추기 위해 아날로그 제어기만을 도입하는 경우 제어회로가 너무 복잡해 지고 제어의 유연성이 떨어지는 단점을 수반하게 된다. 본 논문에서는 3상 5[kVA]급 농동전력필터의 저가형 제어기를 구현하기 위해 저가의 원칩 마이크로프로세서인 80C196KC를 사용하영 디지털 제어부를 구성하며 이를 통해 보상전류 성분의 계산 및 직류단 일정 전압제어를 수행하고, 능동필터 시스템의 전류제어를 위하여 아날로글 형태의 제어기인 히스테리시스 제어기를 함께 사용한다. 컴퓨터 시뮬레이션을 통해서 보상 시스템의 특성을 해석하였으며 실험에 의해 능동전력필터의 저가화를 위해 설계된 제어기가 고조파 및 무효전력 보상을 충실히 수행함을 확인하였다.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.234-243
• /
• 2019

Studying the control strategy of a microgrid under the load unbalanced state helps to improve the stability of the system. The magnitude of the power fluctuation, which occurs between the power supply and the load, is generated in a microgrid under the load unbalanced state is called negative sequence reactive power $Q^-$. Traditional power distribution methods such as P-f, Q-E droop control can only distribute power with positive sequence current information. However, they have no effect on $Q^-$ with negative sequence current information. In this paper, a stationary-frame control method for power sharing and voltage unbalance compensation in islanded microgrids is proposed. This method is based on the proper output impedance control of distributed generation unit (DG unit) interface converters. The control system of a DG unit mainly consists of an active-power-frequency and reactive-power-voltage droop controller, an output impedance controller, and voltage and current controllers. The proposed method allows for the sharing of imbalance current among the DG unit and it can compensate voltage unbalance at the same time. The design approach of the control system is discussed in detail. Simulation and experimental results are presented. These results demonstrate that the proposed method is effective in the compensation of voltage unbalance and the power distribution.