• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.48-51
• /
• 1997

(Pb. La)TiO$_3$ thin films were fabricated by sol-gel Processing and spin-coated on the Pt substrate. The spin-coated PLT films were sintered at 75$0^{\circ}C$ for 5min by rapid thermal ann La content dependence of the electrical properties of the PLT thin films are discussed. Wit La mole% from 20 to 36mo1e%. the dielectric constant of the PLT thin films decreased f 570. P-E hysteresis loops changed from ferroelectric to paraelectric. and the charge storage charging time decreased. The Curie Point decreased with increasing La content. The leak density also decreased and La 36mo1% species shows mood characteristics less than 10- electric field 500 (KV/cm) Because of the broad range of composition-controlled ferroelectric PLT thin films are suitable for memory application.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.5
• /
• pp.284-287
• /
• 2017

The electrocaloric effect in $0.94(Bi_{0.5}Na_{0.5})TiO_3+0.06KNbO3+0.9wt%$ G.F.ferroelectricceramics was observed in terms of the temperature change (${\Delta}T$) of the fabricated ceramics, Curie temperature $T_c$, and applied electric field. The specimens were fabricated by a conventional solid-state reaction. $T_c$ appeared near $165{\sim}170^{\circ}C$. The P-E hysteresis showed a tendency to slim down with a temperature increase and finally was slimmest near $150^{\circ}C$. With the increase of temperature, the polarization revealed a gradual decrease, and a sharp decline near $T_c$. When an electric field of 45 kV/cm was applied, the largest polarization was shown. The maximum value of the temperature change (${\Delta}T=0.31^{\circ}C$) was obtained at $165^{\circ}C$ under an applied electric field of 45 kV/cm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.7
• /
• pp.570-575
• /
• 2002

$SrBi_2Ta_2O_9$ thin films were etched in $Cl_2/CF_4/Ar$ inductively coupled plasma (ICP). The maximum etch rate was 1300 ${\AA}/min$ at 900 W ICP power in Cl$_2$(20%)/$CF_4$(20%)/Ar(60%). As RF source power increased, radicals (F, Cl) and ion ($Ar^+$) increased. The influence of plasma induced damage during etching process was investigated in terms of P-E hysteresis loops, chemical states on the surface, surface morphology and phase of X-ray diffraction. The chemical states on the etched surface were investigated with X-ray spectroscopy and secondary ion mass spectrometry. After annealing $700^{\circ}C$ for 1 h in $O_2$ atmosphere, the decreased P-E hysteresises of the etched SBT thin films in Ar and $Cl_2/CF_4/Ar$ plasma were recovered.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.11
• /
• pp.801-805
• /
• 2013

In this study, electrocaloric effects of Pb-free $(Ba_{0.85}Ca_{0.15})(Ti_{0.92}Zr_{0.08})O_3$ ferroelectric ceramics were investigated and discussed using the characteristics of P-E hysteresis loops at wide temperature range from room temperature to $140^{\circ}C$. The remnant polarization $P_r$ and coercive field $E_c$ were decreased with increasing temperature. The temperature change ${\Delta}T$ by the electrcaloric effect was calculated by Maxwell's relations, and reached the maximum of ~0.15 at $120^{\circ}C$ under applied electric field of 30 kV/cm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.136-139
• /
• 1999

The post-annealing treatments on RF (Radio Frequency) magnetron sputtered PZI(Pb$\_$1.05/(Zr$\_$0.52/, Ti$\_$0.48/)O$_3$thin films(4000${\AA}$) have been investigated. for a structure of PZT/Pt/Ti/SiO$_2$/Si Crystallization pproperties of PZT films were strongly dependent on RTA(Rapid Thermal Annealing) annealing temperature. We were able to obtain a perovskite structure of PZT at a low temperature of 600$^{\circ}C$. P-E curves of Pd/PZT/Pt capacitor annealed at 700$^{\circ}C$ demonstrate typical hysteresis loops. The measured values of P$\_$r/, E$\_$c/, by post annealed at 700$^{\circ}C$ were 12.1 ${\mu}$C/$\textrm{cm}^2$, 120KV/cm respectively.

• Journal of the Korean Ceramic Society
• /
• v.52 no.4
• /
• pp.237-242
• /
• 2015

$Bi_{0.5}(Na_{0.78}K_{0.22})_{0.5}TiO_3$ (BNKT) lead-free piezoelectric ceramics modified by $LaMnO_3$ (LM) were fabricated by conventional solid-state method. The crystal structure and the morphology of the lead free ceramics were analyzed by XRD (X-ray diffraction) and FE-SEM (Field Emission Scanning Electron Microscopy). The LM modified BNKT ceramics have a phase transition from ferroelectric tetragonal to non-polar pseudo-cubic. Despite decreases in the remnant polarization ($P_r$) and coercive field ($E_c$) in the P-E hysteresis loops, the electric-field induced strain properties were significantly enhanced by the LM modification. The highest value of $S_{max}/E_{max}=412pm/V$ at an applied electric field of 5 kV/mm was found in BNKT-0.01LM ceramic.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.39-42
• /
• 1995

In this study, PLZT thin films prepared by Sol-Gel method were deposited on ITO glass by spin coating and cryatallized at 750$^{\circ}C$ for 5 min by RTA in oreder to investigate their electrical and optical properties. Although thin film experieneced narrowing their hysteresis loops with increasing La content, E$\sub$c/ and P.sub r/ were higher for thin film than for bulk materials. $\varepsilon$$\sub$r/ and optical transmittance increased with increasing La content.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.1
• /
• pp.6-9
• /
• 2005

Aging characteristics of 0.2PMN-0.8PZT multilayer ceramic actuators (MCA) has been investigated by applying both triangular wave function for unpoled and unipolar wave for poling. P-E hysteresis loops of the MCA had been distorted after about 90 million cycles running in triangular wave function. Effective electromechanical coupling coefficient was calculated in resonant and anti resonant frequencies. And pseudo-piezoelectric constant $d_{33}$ was also estimated from the strain versus electric field characteristics. The crack growth of MCA was clearly observed along to the boundary between electrode and inactive area. That results were thought due to the internal tensile stress came from both actuation of $d_{33}$ mode and motion of Poisson ratio.

• BMB Reports
• /
• v.35 no.5
• /
• pp.498-507
• /
• 2002

A gene that encodes a thermostable protease, coined thermicin, has been isolated from Thermoanaerobacter yonseiensis that is expressed and characterized in E. coli.. In order to elucidate the molecular characteristics on thermostability of the enzyme, molecular modeling and mutagenesis technology were applied. In the modeling structure, the structural core, including the active site, was well conserved; whereas, the two loop regions were unique when compared to thermitase. The mutant enzyme with the small loop deleted (D190-I196), based on modeling structural information, showed identical enzyme activity. However, when the large loop was deleted (P233-P244), a little lower $K_m$ and even a lower kcat was found. This indicates that the large loop could influence catalytic activity. However, the unfolding temperature ($T_m$), which was determined by a differential-scanning calorimetry for the mutant enzyme deleted the small loop, was $96^{\circ}C$. This is $14^{\circ}C$ lower than that for the parent thermicin. These results suggest that the small loop may play a role in maintaining the proper folding of the enzyme at high temperatures, whereas the large loop might be related to catalysis.

• Journal of the Korean Chemical Society
• /
• v.38 no.10
• /
• pp.769-773
• /
• 1994

Higher order structure of 5S rRNA isolated from Xanthomonas celebensis was examined using angiogenic extracted from milk. Angiogenin cleaved exclusively 3' P-O bonds on the far sides of pyrimidines in the single-stranded sequences of 5S rRNA. Whereas angiogenin acted only on the loop d of 5S rRNA at pH 7.0 in the presence of 10 mM $Mg^{2+}$, it acted on all the loops (a, b, c and d) except loop e in the absence of $Mg^{2+}$. In the absence of $Mg^{2+}$, bonds $U_{74}$-$G_{75}$, $U_{77}$-$A_{78}$ and $U_{103}$-$A_{104}$ were highly susceptible to the action of angiogenin both at pH 7.0 and at pH 3.5. On the other hand, at pH 3.5 in the absence of $Mg^{2+}$ angiogenin strongly cleaved the bond $C_{17}$-$G_{18}$ of loop a and the bond $U_{55}$-$G_{56}$ of loop b. The results lead us to the following conclusion. First, angiogenin can be used as one of the probes for the tertiary structure analysis of 5S rRNA. Second, the structure of loop d of 5S rRNA is variable depending on the concentrations of $Mg^{2+}$ and $H^{1+}$.