• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.2
• /
• pp.97-104
• /
• 2018

In this study, a structure satisfying the fatigue constraint is designed by applying the topology optimization based on the phase field design method. In order to predict life based on the stress value, high cycle fatigue failure theory in which stress acts within the range of elastic limit is discussed and three fatigue theories of modified-Goodman, Smith-Watson-Topper and Gerber theory are applied. To calculate the global maximum stress, a modified P-norm stress correction method is used. As a result, it is possible to obtain topology optimization results that minimize the volume while satisfying the fatigue constraints. By applying the phase field design method, a simple shape with a minimized gray scale was obtained, and the maximum stress value acting on the optimization result became very close to the allowable stress value due to the modified P-norm stress method. While previous studies does not consider the stress correction factor, this study proposes the determination method regarding the stress correction factor considering loading effects related to axial stress components.

• Geophysics and Geophysical Exploration
• /
• v.2 no.1
• /
• pp.33-42
• /
• 1999

AVO and complex trace analyses mainly used to characterize natural gas reservoir were tested in this paper for a possible application to detection of major geological discontinuities such as fracture zones. The test data used in this study were calculated by utilizing a viscoelastic numerical program which was based on the generalized Maxwell body for a horizontal fracture model. In AVO analysis of a horizontal fracture zone, p-wave reflection appears to be variant depending upon the acoustic-impedence contrast and the offset distance. The fracture zone is also effectively clarified both in gradient stack and range-limited stack in which fracture zone reflection is attenuated with the increasing offset distance. In complex attribute plots (instantaneous amplitude, frequency, and phase), the top and bottom of the fracture Tone are characterized by a zone of strong amplitudes and an event of the same phase. Low frequency characteristics appear at the fracture zone and the underneath. Amplitude attenuation and waveform dispersion are dependent on Q-contrast between the fracture zone and the surrounding media. They were properly compensated by optimum inverse Q-filtering.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.118-127
• /
• 2010

Resistivity logging instruments are designed to measure the electrical resistivity of a formation, and this can be directly interpreted to provide a water-saturation profile. However, resistivity logs are sensitive to borehole and shoulder-bed effects, which often result in misinterpretation of the results. These effects are emphasised more in the presence of tool eccentricity. For precise interpretation of short- and long-normal logging measurements in the presence of tool eccentricity, we simulate and analyse eccentricity effects by combining the use of a Fourier series expansion in a new system of coordinates with a 2D goal-oriented high-order self-adaptive hp finite-element refinement strategy, where h denotes the element size and p the polynomial order of approximation within each element. The algorithm automatically performs local mesh refinement to construct an optimal grid for the problem under consideration. In addition, the proper combination of h and p refinements produces highly accurate simulations even in the presence of high electrical resistivity contrasts. Numerical results demonstrate that our algorithm provides highly accurate and reliable simulation results. Eccentricity effects are more noticeable when the borehole is large or resistive, or when the formation is highly conductive.

• Tunnel and Underground Space
• /
• v.25 no.1
• /
• pp.56-67
• /
• 2015

In this study, a source locating technique applicable to transversely isotropic media was developed. Wave velocity anisotropy was considered based on the partition approximation method, which simply enabled AE source locating. Sets of P wave arrival time were decided by the two-step AIC algorithm and they were later used to locate the AE sources when having the least error compared with the partitioned elements. In order to validate the technique, pencil lead break test on artificial transversely isotropic mortar specimen was carried out. Defining the absolute error as the distance between the pencil lead break point and the located point, 1.60 mm ~ 14.46 mm of range and 8.57 mm of average were estimated therefore it was regarded as thought to be 'acceptable' considering the size of the specimen and the AE sensors. Comparing each absolute error under different threshold levels, results showed small discrepancies therefore this technique was hardly affected by background noise. Absolute error could be decomposed into each coordinate axis error and through it, effect of AE sensor position could be understood so if optimum sensor position was able to be decided, one could get more precise outcome.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4_1
• /
• pp.67-76
• /
• 1992

A hierarchical formulation based on p-version of the finite element method for linear elastic axisymmetric stress analysis is presented. This is accomplished by introducing additional nodal variables in the element displacement approximation on the basis of integrals of Legendre polynomials. Since the displacement approximation is hierarchical, the resulting element stiffness matrix and equivalent nodal load vectors are hierarchical also. The merits of the propoosed element are as follow: i) improved conditioning, ii) ease of joining finite elements of different polynomial order, and iii) utilizing previous solutions and computation when attempting a refinement. Numerical examples are presented to demonstrate the accuracy, efficiency, modeling convenience, robustness and overall superiority of the present formulation. The results obtained from the present formulation are also compared with those available in the literature as well as with the analytical solutions.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.1
• /
• pp.171-180
• /
• 2021

The present study investigated the effects of dynamic tubing gait (DTG II) program on the balancing ability for the promotion of life care of patients with chronic stroke. In the study, 25 sessions of DTG II program (30 minutes per session, 5 sessions per week, for a total of 5 weeks) were applied to 10 patients with chronic stroke. To determine the effects of DTG II program for improving balance, surface electromyography(external oblique, erector spinae, iliopsoas, gluteus maximus), symmetry index test on three pelvic axes, and dynamic gait index test were performed before and after the intervention. The results showed statistically significant differences between preand post-intervention measurements of the gluteus maximus muscle at early and mid-stance phases(p<.05). The pelvic symmetry index differed significantly between pre- and post-intervention measurements of diagonal and rotational movement(p<.05). Comparison of dynamic gait index also showed statistically significant differences between pre- and post-intervention measurements(p<.05). Based on these findings, it was determined that the DTG II program was able to improve the balancing ability of patients with chronic stroke by activating their trunk muscles and improving the symmetry of diagonal pelvic movement and rotation. Therefore, DTG II program is recommended as an interventional method to improve life-care through improving the balancing ability of patients with chronic stroke.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.2
• /
• pp.49-63
• /
• 1989

Wave drift forces which are small in magnitudes compared to the first order wave exciting forces can cause very large motion of a vessel in waves. In this paper a theoretical and experimental analysis is made of the mean and slowly varying wave dirft forces on the semi-submersible platform. Theoretical calculations are performed by using near field method with three dimensional diffraction theory and model tests are carried out in regular and irregular waves with a 1/60 semi model. Test results are compared with theoretical calculations and the mooring spring effects in the test are discussed.

• Applied Biological Chemistry
• /
• v.9
• /
• pp.153-159
• /
• 1968

In this paper the auther investigated the chemical properties, process of humification and type of humic acid in soils which were reclaimed by farming for cultivation in Kangwondo. The results obtained in this studies were summarized as follows: 1. General chemical components of these soil were similar to the ordinary soil but C.E.C. and humus contents were found much more 2. Humic acid and fulvic acid which were extracted with NaOH from soil were greater than those of Na-pyrophosphate(Na-p.) and NaF. Hmus contents and PQ% were increased much more in the upper layer than in the lower layer. 3. Degree of humification of humic acid extracted with NaOH. was very similar to those extracted with Na-pyrophosphate. Humification degree of humic acid extracted with NaF was lower than humic acid which were extracted with NaOH and Na-pyrophosphate. But humification degree of humic acid extracted with NaOH was similar to that with Na-pyrophosphate. Humic acid in B soil and the upper layer was higher than A, C soil and the lower layer of soil, in humification degree. 4. Humic acids extracted with NaOH and Na-pyrophosphate from soil were fractionated by Mg into two parts ${\alpha}$ type and ${\beta}$ type humic acid. Humic acids of ${\alpha}$ and ${\beta}$ type extracted with NaOH were higher than these of Na-pyrophosphate in humification degree. In this soil the humification degree of humic acid was not changed during the period of cultivation. 5. ${\alpha}$, ${\beta}$ type humic acid extracted with NaOH were very similar to the humic acid extracted with Na-pyrophosphate in shapes of absorption curves.

• Korean Journal of Psychosomatic Medicine
• /
• v.25 no.2
• /
• pp.176-184
• /
• 2017

Objectives : Middle aged women with depression often experience hot flush symptoms. It is still unclear about the association between depression and hot flush symptoms. Therefore, we investigated hormonal profile, functional somatic symptoms, coping styles and attitude for menopause between depressed women with hot flush and those without hot flush. Methods : This study included 33 depressed patients with hot flush symptoms and 33 depressed patients without hot flush symptoms. Hot flush was confirmed through prospective daily symptom ratings for a week. Subjects' coping styles were assessed by the stress coping checklist. Somatic symptoms were assessed by the Patient Health Questionnaire-15(PHQ-15). Sex hormonal levels were assayed by a radioimmunoassay. The Brief World Health Organization Quality of Life Assessment Instrument(WHOQOL-BREF) was used to evaluate quality of life. Results : In coping style, depressed women with hot flush symptoms used less 'problem-centered coping'($13.15{\pm}3.17$) and 'search for social support'($11.83{\pm}2.84$) than those without hot flush symptoms($15.17{\pm}3.1$, p=0.028 ; $14.25{\pm}3.22$, p=0.009 ; respectively). Depressed women with hot flush symptoms showed more negative attitude toward post-menopause, but its statistical significance was marginally insufficient(p=0.059). We did not find any group differences in sex hormonal levels and somatic complaints assessed by the PHQ-15. The score of social relationship domain of WHOQOL-BREF was significantly lower in subjects with hot flush symptoms($8.62{\pm}2.04$) than subjects without hot flush symptoms($9.71{\pm}1.65$ ; p=0.044). Conclusions : Among middle aged women with depression, the manifestation of hot flush symptoms was associated with coping styles and attitude for menopausal transition. Hot flush symptoms in depressed women negatively influence quality of life, so clinicians actively perform therapeutic approach in case of depressed patients with hot flush symptoms. In case of depressed patients who present hot flushes, cognitive behavior therapy or stress management might be an effective treatment option in company with antidepressants or hormonal treatment. Later, longitudinal study will be needed to evaluate risk factor, cause and effect associated with hot flush and depression.

• The Korean Journal of Malacology
• /
• v.15 no.1
• /
• pp.57-62
• /
• 1999

Condition indices (Cl) are considered to be useful measurements of the nutritive and health status of bivalves although studies on Cl of bivalves are limited due to the lack of a standard formula for calculating Cl. This study attempts to generate Cl of the mussel, Mytilus coruscus inhabiting along the coastal area of Chuja Island in Cheju using three primary formulas. the formulas used in this study: (1) Cl-vol= [tissue dry weight (g) 1000] /shell cavity volume (ml). (2) Cl-wt= [tissue dry weight (g) 1000] / internal shell cavity capacity (g). (3) Cl-size= tissue wet weight (g)/[shell length (mm)]$\^$3/. Monthly condition indices calculated with the three formulas are compared using ANOVA, Duncan's multiple range test and Pearson correlation coefficient. In Chuja Island M. coruscus collected ranged from 50 to 180 mm in shell length. Monthly ranges of Cl-values were 67.48 to 140.61 (Cl-vol), 74.67 to 118.02 (Cl-wt) and 1.4 10$\^$-5) to 1.6 10$\^$-5/ (Cl-size). Cl-vol values in August were higher than two Cl-values in the other months. Monthly Cl-vol was significantly different from Cl-wt and Cl-size. (p<0.05). The results of this study suggest that volumetric condition index (Cl-vol) used in this study is acceptable as a standard measure to evaluate conditions of M. coruscus.