• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.1
• /
• pp.23-27
• /
• 2011

Fabrication of porous silicon(PS) double layer by electrochemical etching is the first step in process of ultrathin solar cell using PS layer transfer process. The porosity of the porous silicon layer can be controlled by regulating the formation parameters such as current density and HF concentration. PS layer is fabricated by electrochemical etching in a chemical mixture of HF and ethanol. For electrochemical etching, highly boron doped (100) oriented monocrystalline Si substrates was used. Ths resistivity of silicon is $0.01-0.02\;{\Omega}{\cdot}cm$. The solution composition for electrochemical etching was HF (40%) : $C_2H_5OH$(99 %) : $H_2O$ = 1 : 1 : 2 (by volume). In order to fabricate porous silicon double layer, current density was switched. By switching current density from low to high level, a high-porosity layer was fabricated beneath a low-porosity layer. Etching time affects only the depth of porous silicon layer.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.1065-1071
• /
• 2010

In this paper, we proposed a novel harmonic load circuit to design a high efficiency class-F amplifier. The proposed load circuit controls termination impedances to enhance the efficiency of class-F power amplifier. The termination impedances at the 2nd and the 3rd harmonics are showed short and open condition, respectively. Also, a fabricated load circuit showed an attenuation characteristic more than 29 dB, that is enough to eliminate harmonics of the class-F power amplifier. The measured drain and power-added efficiency are 75.7 % and 71.3 % at the point of maximum output power 35.17 dBm.

• Ocean and Polar Research
• /
• v.34 no.2
• /
• pp.125-135
• /
• 2012

To evaluate the algicidal impact of a newly developed algicide thiazolidinedione derivative, TD49, on dinophyceae Akashiwo sanguinea in aquatic ecosystems, tentative culture experiments for the target species were conducted in small (SS), middle (MS), and large scale (LS) culture vessels. When TD49 was introduced at the final concentration of $2{\mu}M$ in SS and MS, as well as $1{\mu}M$ in LS, the abundance of A. sanguinea decreased significantly in all the treatments. On the other hand, total phytoplankton abundance, except A. sanguinea in the TD49 treatments, gradually increased with culture time, which implies that a cell destruction of A. sanguinea by TD49 is a major cause of the population growth by other phytoplankton species. Also, A. sanguinea was easily destroyed, which was likely to be a source of extracellular substances. In particular, a pH decrease was significant in the treatments than in the control, which indicates that the water in the treatments has been acidified, due to an increase in the heterotrophic metabolisms of bacteria and degradation of A. sanguinea cells. Our results indicate that the TD49 substance is the potential agents for the control of A. sanguinea in the enclosed and eutrophic water bodies.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.340-347
• /
• 2008

Ubiquitous services are high quality and differentiated services which are provided for users by recognizing the context of users and environmental conditions actively. In this case, context-aware middleware is one of the most important technologies required to implement the ubiquitous services. In this paper, we propose a method for providing ubiquitous services in a specific user space effectively and monitoring human bio-sensors. That is, the design and implementation of intelligent home service middleware and monitoring bio-sensors based on context awareness is discussed here. Context information from various sensors is gathered, and suitable services are inferred and provided to users by the middleware system. In our approach, user services can be modelled easily by using facts and rules, and the system can be extended easily to support various ubiquitous services other than intelligent home services also. The system can be integrated with external applications and legacy systems effectively by using various protocols such as RMI, socket and HTTP, XML and etc. We have designed and evaluated various facts and rules for intelligent home services in real environments. Functionality evaluation with the system shows that ubiquitous services can be provided to users effectively in a home environment.

• Journal of Bio-Environment Control
• /
• v.7 no.1
• /
• pp.35-41
• /
• 1998

This experiment was conducted to find out the effect of artificial light sources(high-pressure sodium lamp, metal halide lamp and fluorescent lamp) on growth of crisphead lettuce(Lactuca sativa L.) in a plant factory. No significant differences in leaf fresh and dry weight were presented among them. Lettuce plants grown under fluorescent lamp showed the lowest growth. Considering the growth of lettuce and efficiency of lamps, it is worth using HPS(high-pressure sodium) lamp in plant factories. The leaves of lettuce plants grown under artificial light sources showed tipburn symptoms at 14th day after transplanting. The beginning of tipburn symptom have been seen on the ninth to tenth leaves from the cotyledons. It is estimated that the occurrence of tipburn was related to rapid growth and K uptake of the lettuce Plants. The Ca, Mg. Cu and Zn elements tended to be accumulated in the nutrient solutions but the T-N, P, Fe and Mn elements keep in balance in them.

• Journal of Biosystems Engineering
• /
• v.36 no.1
• /
• pp.15-22
• /
• 2011

An experimental variable rate nursery sprayer was developed to adjust application rates for canopy volume in real time. The sprayer consisted of two vertical booms integrated with ultrasonic sensors, and variable rate nozzles coupled with pulse width modulation (PMW) based solenoid valves. A custom-designed microcontroller instructed the sensors to detect canopy size and occurrence and then controlled nozzles to achieve variable application rates. A spray delivery system, which consisted of diaphragm pump, pressure regulator and 4-cycle gasoline engine, offered the spray discharge function. Spray delay time, time adjustment in spray trigger for the leading distance of the sensor, was measured with a high-speed camera, and it was from 50 to 140 ms earlier than the desired time (398 ms) at 3.2 km/h under indoor conditions. Consequently, the sprayer triggered 4.5 to 12.5 cm prior to detected targets. Duty cycles of the sprayer were from 20 to 34 ms for senor-to-canopy (STC) distance from 0.30 to 0.76 m. Outdoor test confirmed that the nozzles were triggered from 290 to 380 ms after detecting tree canopy at 3.2 km/h. The spray rate of the new sprayer was 58.4 to 85.2% of the constant application rate (935 L/ha). Spray coverage was collected at four areas of evergreen canopy by water sensitive papers (WSP), and ranged from 1.9 to 41.1% and 1.8 to 34.7% for variable and constant rate applications, respectively. One WSP area had significant (P < 0.05) difference in mean spray coverage between two application conditions.

• Korean Journal of Ecology and Environment
• /
• v.38 no.2 s.112
• /
• pp.261-270
• /
• 2005

Biological control agents (BCA; algicidal bacterium Xantobacter autotrophycus) plus casitone media, strongly changed physicochemical variables, standing crops of phytoplankton and microcystin-LR phytoplankton in 100-L mesocosm constructed in a small hexagonal pond (3.5 m ${\times}$ 5 m). No M. aeruginosa showed by 8 days, and 60% of total standing crops of phytoplanktons were decreased by the BCA treatment. BCA treatment also induced a strong decline of cellular extracted microcystin-LR (MCLR) and a remarkable increase of dissolved MCLR with the decrement in standing crops of cyanobacteria. In addition, BCA strongly increased all nutrients, but new outbreak of phytoplanktons hardly showed in the experimental mesocosm. The field application of BCA to controling the cyanobacterial bloom in large lakes and reservoirs is not relevant due to high concentration of nutrients and toxins. Thus, a further study is needed to diminish the adverse effects after BCA treatment for water quality preservation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.4
• /
• pp.172-179
• /
• 1988

A cartridge type hydraulic logic valve consists of simple two port valve whose poppet is closed or opened by means of pressure signal of a pilot line. Accordingly, the logic valve can be used not only for direction, flow and pressure control purpose but also for versatile function valve which enables all above mentioned functions. In addition, the valve has little internal leakage and pressure loss, superior response characteristics and easiness in making small block type valve. The above mentioned good performances being recognized recently, the logic valve has been used widely in the large scale hydraulic system such as a hydraulic press system, for the performance requirements of high speed operation and precise control characteristics. However, there are scarce reports until now, except for a few ones from Aachen Institute of Technology in West Germany, so it is necessary to be studied on development and investigation for practical application. This paper showed that the static and dynamic characteristics of a logic valve when the logic valve is used for directional control, to investigate the relations between the valve operating characteristics and the valve design conditions. From the above mentioned procedure, it was ascertained that the valve operation characteristics obtained by numerical analysis showed good agreements with experimental results. The representative results obtained are as follows; 1. During the valve is closing, the poppet velocity is almost constant in the logic valve. 2. The pilot pressure P sub(3) and the resistance R in the pilot line have much influences on the valve operation time. 3. Spring strength have not such a severe influence on the valve operating time. 4. The operation characteristics of the logic valve can be estimated with good accuracy comparatively by numerical analysis with the equations describing poppet motion.

• Korean Journal of Food Science and Technology
• /
• v.35 no.6
• /
• pp.1169-1173
• /
• 2003

Growth of a newly emerging pathogen, Arcobacter butzleri, in domestic raw meat was evaluated by various sanitizing agents. One percent of acetic acid, citric acid, lactic acid, and trisodium phosphate (TSP) added to the cell suspension of six A. butzleri strains inhibited their growth within ten minutes, and especially the lactic acid inhibited growth within five minutes. One percent of all the acids at the culture broth inhibited growth completely within one hr. 0.1% of the acids inhibited growth within 72 hr, whereas two percent of TSP had the same effect in one hr. Among the acids, lactic acid had the strongest inhibition activity. Hydrogen peroxide, sodium hypochlorite, and ethanol showed lower inhibiting activities than the above agents. While garlic extract and lactic acid bacteria culture also inhibited A. butzleri, onion extract did not. Therefore, food-borne poisoning of A. butzleri in raw meat could be prevented by organic acid and trisodium phosphate treatments.

• KSBB Journal
• /
• v.22 no.4
• /
• pp.179-184
• /
• 2007

This study introduces the characteristics and some applications of repetitive polypeptides, especially to the biomaterial, tissue engineering scaffolds, drug delivery system, and DNA separation systems. Since some fibrous proteins, which consist of repeating peptide monomers, have been reported that their physical properties are changed dramatically by means of temperature alteration or pH shifting. For that reason, fibrous protein-mimetic polypeptides, which are produced by the recombinant technology, can be applied to the diverse biological fields. Repetitive polypeptides can also be used in the bioseparation area such as DNA sequencing, because they make DNA separation possible in free-solution electrophoresis by conjugating DNA fragments to them. Moreover, artificial synthesis of repetitive polypeptides helps to demonstrate the correlations between mechanical properties and structures of natural protein polymer, which have been proven that repetitive domains are affected by the sequence of the repeating domains and the number of repeating subunits. Repetitive polypeptides can be biologically synthesized using some special cloning methods, which are represented here. Recursive directional ligation (RDL) and controlled cloning method (CCM) have been proposed as excellent cloning methods in that we can control the number of repetition in the multimerization of polypeptides and the components of repetitive polypeptides by either method.