• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7A
• /
• pp.1074-1079
• /
• 1999

In this paper, the concept of puncturing is introduced to turbo code in order to implement various code as code rate varies.rates. First, several different puncturing matrices are applied into rate 1/3 encoder in order to produce various rate 1/2 turbo codes. By analyzing and comparing these results, we can show which puncturing pattern should be selected in order to maintain good performance. Second, we select some appropriate puncturing patterns which provide the best performance of turbo codes of various rates from 1/3 to 2/3 among all the possible candidates. Finally, we provide the change of required Eb/No at $P_b=10^{-4}$ as code rate varies.

• Computers and Concrete
• /
• v.24 no.6
• /
• pp.561-570
• /
• 2019

Understanding the realistic behavior of concrete up to failure under different loading conditions within the framework of damage mechanics and plasticity would lead to an enhanced design of concrete structures. In the present investigation, QR (Quick Response) code based random speckle pattern is used as a non-contact sensor, which is an innovative approach in the field of digital image correlation (DIC). A four-point bending test was performed on RC beams of size 1800 mm × 150 mm × 200 mm. Image processing was done using an open source Ncorr algorithm for the results obtained using random speckle pattern and QR code based random speckle pattern. Load-deflection curves of RC beams were plotted for the results obtained using both contact and non-contact (DIC) sensors, and further, Moment (M)-Curvature (κ) relationship of RC beams was developed. The loading curves obtained were used as input data for material model parameters in finite element analysis. In finite element method (FEM) based software, concrete damage plasticity (CDP) constitutive model is used to predict the realistic nonlinear quasi-static flexural behavior of RC beams for monotonic loading condition. The results obtained using QR code based DIC are observed to be on par with conventional results and FEM results.

• Phonetics and Speech Sciences
• /
• v.2 no.4
• /
• pp.3-10
• /
• 2010

The present study aims to investigate neural activations according to the level of code switching in English proficient bilinguals and to find the relationship between the performance of language switching and proficiency level using ERPs (event-related potentials). First, when comparing high-proficient (HP) with low-proficient (LP) bilingual performance in a native language environment, the activation level of N2 was observed to be higher in the HP group than in the LP group, but only under two conditions: 1) the language switching (between-language) condition known as indexing attention of code switching and 2) the inhibition of current language for L1. Another effect of N400 can be shown in both groups only in the language non-switching (within-language) condition. This effect suggests that both groups completed the semantic acceptability task well in their native language environment without the burden of language switching, irrespective of high or low performance. The latencies of N400 are only about 100ms earlier in the HP group than in the LP group. This difference can be interpreted as facilitation of the given task. These results suggest that HP showed the differential activation in inhibitory system for L1 in switching condition of L1-to-L2 to be contrary to inactivation of inhibitory system for the LP group. Despite the absence of an N400 effect at the given task in both groups, differential latencies between the peaks were attributed to the differences of efficiency in semantic processing.

• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.43-54
• /
• 2016

In the present paper, development of the three-dimensional (3D) computational code based on Galerkin finite element method (GFEM) for solving the multigroup forward/adjoint diffusion equation in both rectangular and hexagonal geometries is reported. Linear approximation of shape functions in the GFEM with unstructured tetrahedron elements is used in the calculation. Both criticality and fixed source calculations may be performed using the developed GFEM-3D computational code. An acceptable level of accuracy at a low computational cost is the main advantage of applying the unstructured tetrahedron elements. The unstructured tetrahedron elements generated with Gambit software are used in the GFEM-3D computational code through a developed interface. The forward/adjoint multiplication factor, forward/adjoint flux distribution, and power distribution in the reactor core are calculated using the power iteration method. Criticality calculations are benchmarked against the valid solution of the neutron diffusion equation for International Atomic Energy Agency (IAEA)-3D and Water-Water Energetic Reactor (VVER)-1000 reactor cores. In addition, validation of the calculations against the $P_1$ approximation of the transport theory is investigated in relation to the liquid metal fast breeder reactor benchmark problem. The neutron fixed source calculations are benchmarked through a comparison with the results obtained from similar computational codes. Finally, an analysis of the sensitivity of calculations to the number of elements is performed.

• Nuclear Engineering and Technology
• /
• v.51 no.7
• /
• pp.1828-1834
• /
• 2019

The performance of a plastic scintillator for use in an in situ measurement system was analyzed using simulation and experimental methods. The experimental results of four major pure beta-emitting radionuclides, namely $^3H$, $^{14}C$, $^{32}P$, and $^{90}Sr/^{90}Y$, were compared with those obtained using a Monte Carlo N-particle (MCNP) code simulation. The MCNP simulation and experimental results demonstrated good agreement for $^{32}P$ and $^{90}Sr/^{90}Y$, with a relative difference of 1.95% and 0.43% between experimental and simulation efficiencies for $^{32}P$ and $^{90}Sr/^{90}Y$, respectively. However, owing to the short range of beta particles in water, the efficiency for $^{14}C$ was extremely low, and $^3H$ could not be detected. To directly measure the low-energy beta radionuclides considering their short range, a system where the source could flow directly to the scintillator was developed. The optimal thickness of the plastic scintillator was determined based on the suggested diameter. Results showed that the detection efficiency decreases with an increase in the depth of the water. The detection efficiency decreased drastically to approximately 10 cm, and the tendency was gradually constant.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.3
• /
• pp.389-394
• /
• 2011

The aims of this study are to investigate the Korean population stereotype for control-display linkage of four-burner gas-range, and to compare the results of this study with those of the existing studies. The investigation used a paper-pencil test using questionnaire with a sign code system for eliminating suggestive effect of sequential code. Two hundreds and eighty subjects participated in the investigation, among whom 254 subjects effectively responded to question for the gas-range stereotype. The results showed that type III(refer to Table 2) was chosen more frequently than type II, IV and V(p<0.01). The gender is not significant on responding rate for the type of control-burner linkage(p>0.92), while the age and occupation have significant effect on the rate(p<0.01). Based on this study, it appears that type III represents the population stereotype of control-burner arrangement for Korean. The stereotype was the same as that of Chinese, but different from that of American(type II or IV). The findings of this study would be helpful as basic data for ergonomically designing gas-range or similar products.

• Journal of dental hygiene science
• /
• v.5 no.1
• /
• pp.1-5
• /
• 2005

Ethical perception may be thought of as 'professional skills'. Despite this, however, the dental hygiene curriculums tend to disregard ethics education. This paper describes ethical perception in dental hygiene students. Questionnaire surveys were conducted for 374 in dental hygiene students. For statistical analyses of collected data, the multiple linear regression were adopted. Demand as necessity of dental ethics education, clinical practice exercise, practice of work ethics education were found to have significant major effects on basic ethics perception. The major variables which related to the licensure and health care law and teamwork were to knowledge of revised ethics code of dental hygienist and to demand as necessity of dental ethics education. The major variables influencing the professional protocol were to knowledge of revised ethics code of dental hygienist, to demand as necessity of dental ethics education, role model for learning ethical principles. Revised ethics code of dental hygienist was the most important factor affecting professional protocol. The major variables influencing the decision-making were to demand as necessity of dental ethics education, to knowledge of revised ethics code of dental hygienist, clinical practice exercise, role model for learning ethical principles (church). About 88.4% of the students unawared to knowledge of revised ethics code of dental hygienist and perception of professional protocol of the students awared to knowledge of revised ethics code of dental hygienist was $3.44{\pm}0.23$ (p=0.000).

• Journal of Sensor Science and Technology
• /
• v.20 no.4
• /
• pp.234-237
• /
• 2011

This paper presents a study into pH Indicator-Embedded hydrogel micro-particles which are encoded various shapes according to the captured indicator. We incorporate various pH indicators into a photo-curable hydrogel, PEG-DA(Poly(ethylene glycol) diacrylate). Using the latest fluidic lithography techniques, we can easily fabricate variously patterned hydrogel particles based on in-situ photopolymerization of the PEG-DA in a micro-fluidic channel. The shape of the particle is related to the pH indicator inside the particle. We demonstrate that the micro pH sensors change their colors according to the pH levels. The micro pH sensors have various characteristics that are related to the curing time, particle size, etc. By changing these conditions, we can adjust the long term stability and reaction time of the hybrid micro pH sensors.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.16 no.1
• /
• pp.74-83
• /
• 2020

A number of so-called 'Type IV' cracking was reported to occur at the welded joints of the P91 steel or P92 steel reheat steam piping systems in Korean supercritical thermal power plants. The reheat steam piping systems are subjected to severe thermal and pressure loading conditions of coolant higher than 570℃ and 4MPa, respectively. In this study, piping analyses and design evaluations were conducted for the piping system of a specific thermal plant in Korea and suggestions were made how structural integrity could be improved so that type IV cracks at the welded joints could be prevented. Integrity evaluations were conducted as per ASME B31.1 code with implicit consideration of creep effects which was used in original design of the piping system and as per nuclear-grade RCC-MRx code with explicit consideration of creep effects. Comparisons were made between the evaluation results from the two design rules. Another approach with modification or reduction of the redundant supports in the piping systems was investigated as a tool to mitigate thermal stresses which should essentially contribute to prevention of Type IV cracking without major modification of the existing piping systems. In addition, a post weld heat treatment method and repair weld method which could improve integrity of the welded joint of P91 steel were investigated.

• Journal of Oral Medicine and Pain
• /
• v.42 no.1
• /
• pp.8-15
• /
• 2017

Purpose: The purpose of this study was to assess the association of vocational interest and personality with temporomandibular disorders (TMD). Methods: Four hundred and fourteen college students in Gyeonggi-do completed Vocational Preference Inventory L form and a questionnaire and collected data were analyzed by R program. Results: The percentage of subjects who responded that they had at least one contributing factor for TMD was significantly different among 27 two-letter Holland codes (p<0.05). The two-letter Holland codes of which the first-letter was social (S) (S artistic [A], S investigative [I], S realistic [R], S conventional [C], S enterprising [E]) or C (CE, CS, CA, CI) had tendency of having the relatively higher prevalence of symptoms and contributing factors for TMD. Among 6 one-letter Holland codes, the prevalence of a symptom of frequent fatigue in the jaw and a habit of gum chewing showed the significant difference (p<0.05). E code seemed to have lower prevalence of a symptom of frequent fatigue in the jaw than other codes. S code appeared to use chewing gum more frequently than other codes. High scorers on emotional instability showed the significantly higher prevalence of TMD symptoms (p<0.05) and contributing factors for TMD (p<0.001) than low scorers. Furthermore, high scorers on emotional instability had significantly higher mean scales of the number of positive answers of TMD symptoms (p<0.01) and of contributing factors for TMD (p<0.001) than low scorers. Conclusions: Symptoms and contributing factors for TMD were related to emotional instability. Vocational Preference Inventory L form might be utilized in assessing emotional factors of persons with TMD symptoms.