한국압력기기공학회 논문집 (Transactions of the Korean Society of Pressure Vessels and Piping)

한국압력기기공학회 (Korean Society of Pressure Vessels and Piping)
권호 표지
DOI QR코드

DOI QR Code

고온 화력 P91강 재열증기배관의 건전성 제고 방안

Schemes to enhance the integrity of P91 steel reheat steam pipe of a high-temperature thermal plant

  • 투고 : 2020.05.12
  • 심사 : 2020.06.19
  • 발행 : 2020.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A number of so-called 'Type IV' cracking was reported to occur at the welded joints of the P91 steel or P92 steel reheat steam piping systems in Korean supercritical thermal power plants. The reheat steam piping systems are subjected to severe thermal and pressure loading conditions of coolant higher than 570℃ and 4MPa, respectively. In this study, piping analyses and design evaluations were conducted for the piping system of a specific thermal plant in Korea and suggestions were made how structural integrity could be improved so that type IV cracks at the welded joints could be prevented. Integrity evaluations were conducted as per ASME B31.1 code with implicit consideration of creep effects which was used in original design of the piping system and as per nuclear-grade RCC-MRx code with explicit consideration of creep effects. Comparisons were made between the evaluation results from the two design rules. Another approach with modification or reduction of the redundant supports in the piping systems was investigated as a tool to mitigate thermal stresses which should essentially contribute to prevention of Type IV cracking without major modification of the existing piping systems. In addition, a post weld heat treatment method and repair weld method which could improve integrity of the welded joint of P91 steel were investigated.

키워드

참고문헌

  1. ASME B31.1, 2016, ASME Code for Power Piping, ASME, New York. https://www.asme.org/codes-standards/find-codes-standards/b31-1-powerpiping
  2. Lee, H.-Y., Son, S.-K., Won, M.-G., and Jeong, J.-Y., 2019, Risks of non-conservative design according to ASME B31.1 for high-temperature piping subjected to long-term operation in creep range," NUCL SCI TECH, Vol. 30, issue 5, pp.1-11. https://doi.org/10.1007/s41365-019-0604-4
  3. 이형연, 손석권, 정지영, 2019"ASME B31.1을 따른 크리프 영역 장기간 가동 고온 배관의 설계 비보수성 기술 현안," 대한기계학회 논문집 A권, A, Vol.43 , No.7, pp. 475-482. https://doi.org/10.3795/KSME-A.2019.43.7.467
  4. RCC-MRx, 2018, Tome 1, Section III Subsection B, Class 1 N1RX Reactor Components its Auxiliary Systems and Supports, AFCEN, Lyon. http://afcen.com/en/publications/rcc-mrx
  5. ASME Boiler and Pressure Vessel Code, 2019, Section III, Rules for Construction of Nuclear Power Plant Components, Division 5, High temperature reactors, ASME, New York. https://www.asme.org/codes-standards/find-codes-standards/bpvc-iii-5-bpvc-section-iii-rules-construction-nuclear-facility-components-division-5-high-temperature-reactors
  6. Lee, H.-Y., Lee, S.-H., Kim, J.-B., Lee, J.-H, 2007"Creep-fatigue damage for a structure with dissimilar metal welds of Mod 9Cr-1Mo and 316L stainless steel," INT J FATIGUE, Vol.29, pp.1868-1879. https://doi.org/10.1016/j.ijfatigue.2007.02.009
  7. Lee, H.-Y., Lim, D.-W., Jeong, J.-Y., 2017"Effects of Long-Time Service at High Temperature on the Material Strength and J-R Curve of Grade 91 Steel," ENG FRACT MECH, Vol.178, pp.445-456. http://dx.doi.org/10.1016/j.engfracmech.2017.02.022
  8. Lee, H.-Y., Kim, W.-G., Kim, N.-H., 2015 "Behavior of Grade 91 material specimens with and without defect at elevated temperature," INT J PRES VES PIP, Vol.125, pp.3-12, Jan. http://dx.doi.org/10.1016/j.ijpvp.2014.10.002
  9. Tuskamoto, S., Lie, Y., Shirane,T., Abe, F., 2013 "Improvement of microstructure stability during creep in high Cr ferritic heat resistant steel HAZ,", Trends in Welding Research, Proceedings of the 9th international conference, June 4-8, Chicago, USA.
  10. Lee, H.-Y., Won, M.-G., Huh, N.-S. 2019 "HITEP_RCC-MRX program for the support of elevated temperature design evaluation and defect assessment," J PRESS VESS-T ASME, Vol.141, October, 051205-1-13. https://doi.org/10.1115/1.4043916
  11. ASME B&PV Code, Sec. II, Part D, 2017, "Materials," American Society of Mechanical Engineers, New York. https://www.asme.org/codesstandards/find-codes-standards/bpvc-iid-bpvc-section-ii-materials-part-d-properties
  12. 김연수, 허남수, "내부 및 외부 원주방향 표면균열존재하는 배관의 두께효과를 고려한 소성 한계하중 계산식의 제시," Vol.14(1), pp.58-67, 한국압력기기공학회논문집. http://dx.doi.org/10.20466/KPVP.2019.15.2.071