• 조명전기설비학회논문지
• /
• 제30권2호
• /
• pp.71-77
• /
• 2016

The dielectric barrier discharge (DBD) has low efficiency due to about 70% input power is consumed as thermal energy in the discharge space. However, because of the usage of DBD ozone generator is easier than other methods. The DBD ozone generator has been widely applied for high concentration ozone generation in the industrial application. But, the low-capacity compact DBD ozone generator is not applied so far. Therefore, the DBD ozone generator is necessary to improve ozone production efficiency and reduce the capacity. In this paper, the stainless steel pipe inner electrode was designed with hall type and screw type to improve the ozone production yield. The manufactured two inner electrodes were experimented with normal type for comparison of the discharge characteristics and the ozone generating characteristics. As the experimental results, the discharge current effective value of designed inner electrodes with hall type and screw type are higher than the normal type, due to unequal electric field is formed at the boundary. However, the difference of designed and original electrodes is less than 0.1mA that has no effect on the discharge characteristic. On the other hand, the screw type inner electrode increased higher than original model about 7 times when the flow rate of the oxygen source gas was increased from $0.6{\ell}/min$ to $1.0{\ell}/min$ The reason was assumed by the flow rate of the raw gas through the inner electrode was became fast that has a cooling effect. The designed hall type and screw type inner electrodes have shown good performances in ozone generation and ozone production that better than normal type in the same electrode surface area.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1407-1409
• /
• 1995

This paper describes ozone concenteration($O_{3con}$), ozone generation($O_{3g}$) and ozone yield($O_{3Y}$) of lamp type ozonizer which be performed a role of lighting source and ozonizer. OLamp is consist of two of low pressure mercury lamps. The important conclusions obtained from this paper are as follows, The more quality of supplied gas(Q) decrease, the higher $O_{3con}$ rise. The more quality of supplied gas(Q) increase, the higher $O_{3g}$ some rise. When supplied oxygen 10[l/min] obtained 4,010[mg/kwh] $O_{3Y}$. The Echerichia coli which is reacted on ozone can be sterilized about 95[%].

• 조명전기설비학회논문지
• /
• 제25권9호
• /
• pp.80-85
• /
• 2011

In this paper, complex discharge type ozonizer with a screw type electrode has been designed and manufactured for environmental improvement using low power and high efficency ozoniazer. The complex discharge type ozonizer is equipped with three electrodes{central electrode(CE), internal electrode(IE) and external electrode(EE)}. Ozone of the complex discharge type ozonizer is generated by superposition of silent discharge and surface discharge in discharge space as a screw type CE and IE are respectively applied to AC high voltage of inverse-polarity has $180[^{\circ}]$ phase difference, EE is common electrode. In this time, when oxygen has been used as supplied gas, the maximum values of ozone concentration, ozone generation and ozone yield were obtained as 8,334[ppm], 3,249[mg/h] and 65.3[g/kwh].

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1063-1065
• /
• 1999

Recently the ozone generation system is well used for cleaning the contaminated water by using the strong oxidization effects. Accordingly, with the purpose of improving ozone yield at the peak of ozone concentration, this paper describes the stracture and characteristics of ozonizer, and focused on the development of a 3E-3G discharge tube.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2002년도 추계학술대회 논문집
• /
• pp.39-42
• /
• 2002

Ozone is one of the most significant atmospheric constituents controlling the intensity of solar UV-B irradiance (280 to 320nm), and the decrease of the total ozone amount supported by ozonesondes and spectrometers will result in the increase of UV-B irradiance at the earth's surface. For example, 1% decrease in stratospheric ozone is expected to yield a 2-3% increase in UV-B irradiance and in the incidence of skin cancer. (omitted)

• 대한전기학회논문지
• /
• 제36권11호
• /
• pp.806-812
• /
• 1987

The ozone generation characteristics are reported for a sawtooth disk to cylinger geometry using positive and negative pulse corona. A series of parametric studies was carried out to obtain optimum values for the pulse repetition frequency as well as the shape and dimensions of the discharge disk and the discharge spacing. Two types of ozonizers were studied: the single disk and the multi-disk. The results of the single disk ozonizer showed that positive corona produced a singificantly higher ozone yield than negative(7ppm/peak watt or 3.5 times larger). However the negative corona produced a much more controllable output which enabled the ozone generation to be directly controlled by adjusting the value of the peak pulse voltage. This results showed that the single disk ozonizer is ideally suited for applications requiring very small controlled quantities of ozone whereas the multi-disk unit can be designed to provide varying outputs depending upon the number of disk electrodes used.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권12호
• /
• pp.614-621
• /
• 2001

In this Paper, the ozonizer is fabricated by piling plate-type electrodes up to minimize and reduce install space. Hereby ozone generation characteristics of piled plate-type ozonizer were investigated. Inverse-polarity voltage was generated by H.V neon transformer. And 2 H.V neon transformers were used to supply high voltage each 9 electrodes of plate-type ozonizer. According to the experiments, ozone concentration, generation and yield were proportionally increased tilth increasing the number of electrode. And the maximum increase effects of 246%, 245%, and 33% were obtained when the number of electrode were increased from 3 up to 9.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2259-2261
• /
• 1999

In this paper, an ozonizer, which can generate individual and superposed silent discharge, using three-phase voltage has been designed and manufactured. The ozonizer consists of 3 electrodes(Central Electrode, Internal Electrode and External Electrode) and 2 gaps(gap between Central Electrode and Internal Electrode, gap between Internal Electrode and External Electrode). Ozone is generated according to voltage supplying method to each electrode by individual silent discharge and three-phase superposed discharge. The characteristics of ozone generation were investigated with variation of discharge power and the quantity of supplied gas($O_2$). In case of individual silent discharge, the maximum values of ozone concentration, ozone generation and ozone yield were obtained between internal electrode and external electrode, and its values were 2300[ppm], 570[mg/h] and 745[g/kWh] respectively. Each maximum values was 5039[ppm], 1773[mg/h] and 851[g/kWh] respectively, when three-phase superposed silent discharge was employed. Therefore, characteristics of ozone generation with three-phase voltage are improved compared with single-phase voltage because silent discharge is generated continuously.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권10호
• /
• pp.500-505
• /
• 2002

In this paper, fluorescent discharge type ozonizer has been designed and manufactured. Ozone discharge and generation characteristics have been investigated in accordance with a sort of internal electrodes, output voltage of power supply, air flow rate and discharge power. Air has been used as the supplied gas of the ozonizer In this paper, when disuse fluorescent lamp was used as an internal electrode. Air flow rate was varied from 2[1/min] to 10[1/min]. The maximum ozone concentration and yield were 3495[ppm] and 23.4[g/kWh] respectively at 2[1/min] air flow rate and 35.2[W] input power. Illumination was appeared as 5[lx] within 15[cm] from external electrode. Whorl fluorescent discharge type ozonizer was used, air flow rate was also varied from 2[1/min] to 10[1/min]. At this moment, the maximum ozone concentration and yield were 2824[ppm] and 21.7[g/kWh] respectively at 2[1/min] air flow rate and 30.5[W] input power. Illumination was also appeared as 5[lx] within 15[cm] from external electrode like used fluorescent lamp.

• 한국농림기상학회지
• /
• 제12권3호
• /
• pp.173-182
• /
• 2010

본 연구는 오존에 노출된 회화나무 8 가계에서 측정한 생리적 지표들을 대상으로, 오존에 대한 민감성을 평가하고, 이 결과들을 종합하여 가계 간 차이를 구명하고자 실시하였다. 회화나무(Sophora japonica L.) 8가계를 대상으로 오존 처리 후, 광합성 특성, 엽록소 함량, 항산화효소 활성 및 MDA 함량을 측정하였고, 각 측정 지표들의 표준화 지수를 이용하여 내성 순위를 결정하였다. 탄소고정효율은 6번 가계를 제외한 모든 가계에서 오존 처리 후 뚜렷하게 감소하였으며, 탄소고정효율의 감소율은 -38%에서 -67% 범위를 보였다. 또한 순양자수율은 7번 가계를 제외한 모든 가계에서 오존 처리 후 뚜렷한 감소를 보였으며, 감소율은 -27%에서 -61%를 나타냈다. 엽록소 a를 비롯한 광색소 함량의 가계 간 차이는 컸으나, 오존 처리 효과는 나타나지 않았다. 오존 처리 후, SOD 활성의 증가율은 7%에서 64%로, 가계 간 차이가 뚜렷하였다. APX 활성은 모든 가계에서 오존 처리 후 증가하였으며, 7번 가계가 가장 큰 활성 증가율(218%)을 보였다. 표준화 지수를 기준으로 할 때, 6번 가계의 내성 수준이 가장 낮았으며, 7번 가계의 내성 수준이 가장 높았다. 6번 가계는 오존 처리 후 탄소고정효율을 비롯한 광합성 특성의 감소율과 광색소 함량의 감소율이 높게 나타난 반면, 내성을 나타내는 항산화효소의 활성 증가가 매우 적었다. 반대로 내성 수준이 높은 7번 가계는 오존 처리 후 광합성 특성의 감소율이 다른 가계에 비해 적었으며, 광색소 함량은 오히려 오존처리 후 증가하였고, 항산화효소의 증가율도 다른 가계에 비해 높게 나타났다.