• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.11
• /
• pp.943-947
• /
• 2007

The effect of hydrogen and oxygen plasma treatments on the structural properties of carbon nanotube(CNT) has been systematically investigated. As the plasma power was increased, nano particles were appeared at the surface of CNTs. At high plasma power(300 Watt), the structure of CNT was changed from nanotube type to nano particles. However, in case of hydrogen plasma treatment, there was no change in microstructure of CNT. From the Raman analysis, the crystallinity of CNT was deteriorated by the plasma treatment, regardless of gas types.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.456-461
• /
• 2014

The objective of this study is to give PP(polypropylene) fabric a good affinity for water. Oxygen plasma was treated to PP fabrics in a commercial glow discharge reactor with different RF power, discharge pressure, and reaction time. The PP fiber surfaces were characterized by the measurement of contact angle and ESCA. A JEOL scanning electron microscope was used to observe the surface morphology of fibers. The spontaneous water uptake amount of PP fabrics was determined by the demand wettability test. To determine the effect of aging on the surface properties of $O_2$ plasma treated PP, all the above measurements of the samples were carried out after 1, 7, 30, 60, and 150 days. The results are as follows. The PP fiber surfaces treated by $O_2$ plasma treatment have a chemical composition that consisted of various oxygen containing polar groups. Consequently, the contact angles of the treated PP fibers decreased, which improved the water uptake rate of PP fabrics. Surface roughness of the treated PP affected the fabric wettabiity as well. Wettability of the treated PP decreased and leveled off with aging. The $O_2$ plasma treatment is a simple and effective method to increase the water uptake rate of PP fabrics.

• Textile Coloration and Finishing
• /
• v.18 no.1
• /
• pp.20-27
• /
• 2006

On the purpose of surface modifications of polypropylene meltblown(PPMB) nonwovens, PPMB nonwovens were treated in the plasma system by oxygen atmosphere with different treatment time and discharge power. Dimensional change and physical properties of the treated nonwovens were evaluated. Contact angles onto PPMB nonwovens about water and methyleneiodide were measured and surface energies were calculated by Owen's method. As the results, microcraters were observed on the surface of treated nonwovens. Tenacity and breaking strain of PPMB nonwovens decreased with increasing treatment time and discharge power. Surface energy of PPMB nonwovens increased by plasma treatment. Meanwhile, the friction static voltage and dyeability of PPMB nonwovens have enhanced to some extent by oxygen plasma treatment due to the improvement of surface hydrophilicity.

• Textile Coloration and Finishing
• /
• v.10 no.6
• /
• pp.1-9
• /
• 1998

The effects of oxygen plasma treatments at different discharge power, reaction pressure, treatment time on yellowing of polyester fabrics were studied. Surface characteristics of the treated fabrics were also investigated by means of SEM and ESCA. The results were as follows : The yellowing of fabrics increases as the power and the treatment time are increased, and decreases as the pressure is increased. The plasma treatment of 100 Watt, 200 mTorr, 5 min. is the optimal condition which is most effective in holding whiteness as well as high weight loss of fabrics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.164-165
• /
• 2007

The effect of hydrogen and oxygen plasma treatments on the structural properties of carbon nanotubes (CNTs) has been systematically investigated. The plasma treatment resulted in the removal of the amorphous carbon particles. As the plasma treatment time was longer, the CNT diameter was reduced, regardless of gas types. Especially, for the sample treated in hydrogen plasma, the catalyst metal on the tip of CNTs was eliminated.

• Carbon letters
• /
• v.6 no.2
• /
• pp.106-110
• /
• 2005

In this work, the effects of atmospheric oxygen plasma treatment of carbon fibers on mechanical interfacial properties of carbon fibers-reinforced epoxy matrix composites was studied. The surface properties of the carbon fibers were determined by acid/base values, Fourier-transform infrared spectrometer (FT-IR), and X-ray photoelectron spectroscopy (XPS) analyses. Also, the crack resistance properties of the composites were investigated in critical stress intensity factor ($K_{IC}$), and critical strain energy release rate mode II ($G_{IIC}$) measurements. As experimental results, FT-IR of the carbon fibers showed that the carboxyl/ester groups (C=O) at 1632 $cm^{-1}$ and hydroxyl group (O-H) at 3450 $cm^{-1}$ were observed for the plasma treated carbon fibers, and the treated carbon fibers had the higher O-H peak intensity than that of the untreated ones. The XPS results also indicated that the $O_{1S}/C_{1S}$ ratio of the carbon fiber surfaces treated by the oxygen plasma led to development of oxygen-containing functional groups. The mechanical interfacial properties of the composites, including $K_{IC}$ (critical stress intensity factor) and $G_{IIC}$ (critical strain energy release rate mode II), were also improved for the oxygen plasma-treated carbon fibersreinforced composites. These results could be explained that the oxygen plasma treatment played an important role to increase interfacial adhesions between carbon fibers and epoxy matrix resins in our composite system.

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.261-265
• /
• 2011

The sterilization effects of atmospheric pressure plasma with the mixture of argon and oxygen were analyzed. The plasma reactor with the shape of dielectric barrier discharge produced the uniform distribution of glow discharge and generated ozone gas effectively according to the various process parameters. The sterilization for E. coli was affected by power, oxygen ratio in the mixture gas, treatment time and distance between reactor and sample. The concentration of ozone was a major source for the sterilization of E. coli, which was enhanced by the increase of power and oxygen ratio. In this study, the effect of atmospheric pressure plasma treatment for the sterilization was confirmed and its result can deliver the atmospheric pressure plasma treatment as the novel sterilization method instead of conventional methods.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.215-215
• /
• 2014

Red color light emitting diodes (LEDs) were fabricated using CdSe/CdZnS quantum dots (QDs). During the device fabrication process, oxygen plasma treatment on the ITO surface was performed to improve the interfacial contact between ITO anode and the hole injection layer. CdSe/CdZnS quantum dots were cross-linked to remove their surrounded organic surfactants. The device shows red emission at 622 nm, which is consistent with the dimension of the QDs (band gap=1.99 eV). The luminance shows 6026% improvement compared with that of LEDs fabricated without oxygen plasma treatment and quantum dots cross-linking process. This approach would be useful for the fabrication of high-performance QLEDs with ITO electrode and PEDOT:PSS hole injection layers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.384.2-384.2
• /
• 2014

We investigated the electrical and structural properties of chemical vapor deposition (CVD)-grown graphene and post treated by O2 plasma. For the patterning of graphene, the plasma technology is generally used and essential for etching of graphene. But, the cautious O2 plasma treatments are required to avoid the damage in graphene edge which can be the harmful effects on the device performance. To analyze the effects of plasma treatment on structural properties of graphene, the change of surface morphology of graphene are measured by scanning electron microscope and atomic force microscope before and after plasma treatment. In addition, the binding energy of carbon and oxygen are measured through to X-ray photoelectron spectroscopy. After plasma treatment, the severe changes of surface morphology and binding energy of carbon and oxygen were observed which effects on the change of sheet resistance. Finally, to analyze of graphene characteristics, we measured the Raman spectroscopy. The measured results showed that the plasma treatment makes the upward of D-peak and downward of G'-peak by elevated power of plasma.

• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.38-43
• /
• 2022

The effect of introducing oxygen functional groups by oxygen plasma treatment of activated carbon on adsorption properties of cesium ions was investigated. During the oxygen plasma treatment, the frequency, power, and oxygen gas flow rates were fixed at 100 kHz, 80 W, and 60 sccm, respectively, while the reaction time was varied. Under the experimental conditions, the amount of cesium ion adsorption increased as the content of oxygen groups on C-O-C and O=C-O bonds increased when the reaction time with oxygen gas was 10 minutes. However, when the reaction time increased to 15 minutes, the oxygen functional group content decreased resulting in the decrease of the adsorbed cesium ion amount. On the other hand, unlike the oxygen content of the surface-treated activated carbon, the specific surface area and pore properties were hardly affected by the oxygen plasma reaction time. As a result, the oxygen plasma-treated activated carbon improved the cesium ion removal rate by up to 97.3% compared to that of the untreated activated carbon. This is considered to be due to the content of oxygen groups on C-O-C and O=C-O bonds introduced on the surface of the activated carbon through oxygen plasma treatment.