• Bulletin of the Korean Chemical Society
• /
• 제18권11호
• /
• pp.1175-1179
• /
• 1997

The adsorption of oxygen on ZnO was monitored by measuring the capacitance of two contacting crystals which have depletion layers originated from the interaction between oxygen and ZnO at 298 K-473 K. An admission of oxygen to the sample induced an irreversible increase in the depth and the amount of adsorbed oxygen was less than 0.001 monolayer in the experimental condition. The relation between pressure of oxygen and variation of the depth was tested from the view point of Langmuir or Freundlich isotherm. Using Hall effect measurement and kinetic experiment, a model equation on the adsorption process was proposed. From the results, it was suggested that oxygen adsorption depended on the rate of electron transfer from ZnO to oxygen while the amount of adsorbed oxygen was kinetically restricted by the height of surface potential barrier.

• Carbon letters
• /
• 제5권2호
• /
• pp.55-61
• /
• 2004

Adsorption isotherms of p-nitrophenol from its aqueous solutions on two samples of activated carbon fibres and two samples of granulated activated carbons have been determined in the concentration range 40~800 mg/L (ppm). The surface of these carbons was modified by oxidation with nitric acid and oxygen gas, and by degassing the carbon surface under vacuum at temperatures of $400^{\circ}C$, $650^{\circ}C$ and $950^{\circ}C$. The oxidation of carbon enhances the amount of carbon-oxygen surface groups, while degassing decreases the amount of these surface groups. The adsorption of p-nitrophenol does not depend upon the surface area alone but appears to be influenced by the presence of oxygen groups on the carbon surface. The adsorption decreases on oxidation while the degassing of the carbon surface enhances the adsorption. The decrease in adsorption depends upon the strength of the oxidative treatment being much larger in case of the oxidation with nitric acid, while the decrease in adsorption on degassing depends upon the temperature of degassing. The results show that while the presence of acidic surface groups which are evolved as $CO_2$ on degassing suppress the adsorption of p-nitrophenol, the presence of non acidic surface groups which are evolved as CO on degassing tend to enhance the adsorption. Suitable mechanisms compatible with the results have been presented.

• 청정기술
• /
• 제14권1호
• /
• pp.7-13
• /
• 2008

RPSA 공정은 기체 혼합물을 흡착법을 이용하여 분리하는 주기적인 공정으로 일반적인 방법의 적용이 어려운 기체 혼합물의 분리에 적용될 수 있다. 공기로부터 분리된 산소는 의료용 산소발생기, 생물학적 폐수처리 공정 등에 이용되어 왔으며 다른 공정에의 적용이 점차 확대되고 있다. RPSA 공정은 한 개의 흡착탑을 이용하여 분리하므로 기존의 PSA공정에 비해서 장치의 구성이 간단하다. 본 연구에서는 공기로부터 산소를 농축하는 RPSA 공정의 기초연구를 통하여 산소농축공정 개발을 위한 기초자료와 제반 기술을 확립하고자 한다.

• Carbon letters
• /
• 제7권2호
• /
• pp.97-104
• /
• 2006

The influence of carbon surface area, carbon-oxygen groups associated with the carbon surface and the solution pH on the adsorption of Pb(II) ions from aqueous solutions has been studied using three activated carbons. The adsorption isotherms are Type I of BET classification and the data obeys Langmuir adsorption equation. The BET surface area has little effect on the adsorption while it is strongly influenced by the presence of acidic carbon oxygen surface groups. The amount of these surface groups was enhanced by oxidation of the carbons with different oxidizing agents and reduced by eliminating these groups on degassing at different temperatures. The adsorption of Pb(II) ions increases on each oxidation and decreases on degassing the oxidized carbons. The increase in adsorption on oxidation has been attributed to the formation of acidic carbon-oxygen surface groups and the decrease to the elimination of these acidic surface groups on degassing. The adsorption is also influenced by the pH of the aqueous solution. The adsorption is only small at pH values lower than 3 but is considerably larger at higher pH values. Suitable mechanisms consistent with the adsorption data have been suggested.

• 대한전자공학회논문지
• /
• 제25권8호
• /
• pp.966-971
• /
• 1988

AES was used to study oxygen adsorption due to the oxygen exposure at 300\ulcorner temperature and segregation of impurities due to annealing on polycrystal copper surface. The intensity of peak of CuM2, 3VV and CuL3 VV increased with annealing time and the peak of CKLL increased after Ar ion bombardment. The effect of oxygen adsorption on copper surface at 300\ulcorner was verified by the decreased of peak of CuM2, 3VV and CuL3 VV as oxygen exposure increase. The binding energy of copper atoms gradualy shifts from 0.7eV to 1.5eV of copper atoms gradually shifts from 0.7eV to 1.5eV after a oxygen exposure. After the oxygen exposure, the width at half the height of CuM2, 3VV is larger 2V*C/S by the effect of chemical liaison of the copper aton with oxygen atom.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.182-182
• /
• 2011

We investigated the adsorption structures of serine on a Ge(100) surface by core-level photoemission spectroscopy (CLPES) in conjunction with density functional theory (DFT) calculations. The adsorption energies calculated using DFT methods suggested that four of six adsorption structures were plausible. These structures were the "O-H dissociated-N dative bonded structure", the "O-H dissociation bonded structure", the "Om-H dissociated-N dative bonded structure", and the "Om-H dissociation bonded structure" (where Om indicates the hydroxymethyl oxygen). These structures are equally likely, according to the adsorption energies alone. The core-level C 1s, N 1s, and O 1s CLPES spectra confirmed that the carboxyl oxygen competed more strongly with the hydroxymethyl oxygen during the adsorption reaction, thereby favoring formation of the "O-H dissociated-N dative bonded" and "O-H dissociation bonded" structures at 0.30 ML and 0.60 ML, respectively. The experimental results were corroborated theoretically by calculating the reaction pathways leading to the two adsorption geometries. The reaction pathways indicated that the "O-H dissociated-N dative bonded structure" is the major product of serine adsorption on Ge(100) due to comparably stable adsorption energy.

• 청정기술
• /
• 제24권4호
• /
• pp.348-356
• /
• 2018

분자전산 모사 방법에 의하여 슬릿 기공과 무작위 에칭 흑연(randomly etched graphite, REG) 기공을 가지는 탄소계 흡착제에서 산소, 질소 그리고 아르곤에 대한 흡착 평형을 계산 하였다. 흡착량 계산에서 흡착제와 흡착질의 신뢰할 만한 모델은 공업적 흡착 분리 공정의 정확한 설계에 매우 중요하다. $5.6{\AA}$의 가장 작은 물리적 기공 크기에서 오직 산소만이 기공의 중심에 흡착하였으며, $5.9{\AA}$부터 질소와 아르곤이 흡착을 시작하였다. 균일한 표면을 가지는 슬릿기공이 결함 기공의 불용 부피와 접근이 불가능한 부피로 인하여 표면에 이질성을 가지는 REG 기공보다 더 높은 흡착 능력을 보였다. 탄소계 흡착제의 경우 질소보다 산소가 높은 흡착량을 보였으며, 기공이 큰 경우 산소와 아르곤의 흡착량은 동일함을 보였다. 298 K에서 흡착 등온선 계산으로부터 압력이 증가할수록 질소에 대한 산소의 흡착량의 비율이 높아짐을 보였다.

• Carbon letters
• /
• 제12권2호
• /
• pp.112-115
• /
• 2011

The scope of this work investigates the relationship between the amount of oxygen-functional groups and hydrogen adsorption capacity with different concentrations of phosphoric acid. The amount of oxygen-functional groups of activated carbons (ACs) is characterized by X-ray photoelectron spectroscopy. The effects of chemical treatments on the pore structures of ACs are investigated by $N_2$/77 K adsorption isotherms. The hydrogen adsorption capacity is measured by $H_2$ isothermal adsorption at 298 K and 100 bar. In the results, the specific surface area and pore volume slightly decreased with the chemical treatments due to the pore collapsing behaviors, but the hydrogen storage capacity was increased by the oxygen-functional group characteristics of AC surfaces, resulting from enhanced electron acceptor-donor interaction at interfaces.

• 전기화학회지
• /
• 제8권2호
• /
• pp.106-114
• /
• 2005

This article covers the theoretical ac-impedance models for the analysis of oxygen reduction on the porous cathode electrode f3r solid oxide fuel cell (SOFC). Firstly, ac-impedance models were explained on the basis of the mechanism of oxygen reduction, which were classified into the rate-determining steps; (i) adsorption of oxygen atom on the electrode surface, (ii) diffusion of adsorbed oxygen atom along the electrode surface towards the three-phase (electrode/electrolyte/gas) boundaries, (iii) surface diffusion of adsorbed oxygen atom m ixed with the adsorption reaction of oxygen atom on the electrode surface and (iv) diffusion of oxygen vacancy through the electrode coupled with the charge transfer reaction at the electrode/gas interface. In each section for ac-impedance model, the representative impedance plots and the interpretation of important parameters attributed to the oxygen reduction reaction were explained. Finally, we discussed in detail the applications of the proposed theoretical ac-impedance models to the real electrode of SOFC system.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.212-212
• /
• 2012

The Coverage dependent attachment of multifunctional groups included in threonine molecules adsorbed to Ge (100)$-2{\times}1$ surface was investigated using core-level photoemission spectroscopy (CLPES) and density functional theory (DFT) calculations. The core-level spectra at a low coverage indicated that the both carboxyl and amine groups participated in the bonding with the Ge (100) surface by "O-H dissociated and N-dative bonded structure". However, at high coverage level, additional adsorption geometry of "O-H dissociation bonded structure" appeared possibly to minimize the steric hindrance between adsorbed molecules. Moreover, the C 1s, N 1s, and O 1s core level spectra confirmed that the carboxyl oxygen is more competitive against the hydroxymethyl oxygen in the adsorption reaction. The adsorption energies calculated using DFT methods suggested that four of six adsorption structures were plausible. These structures were the "O-H dissociated-N dative bonded structure", the "O-H dissociation bonded structure", the "Om-H dissociated-N dative bonded structure", and the "Om-H dissociation bonded structure" (where Om indicates the hydroxymethyl oxygen). These structures are equally likely, according to the adsorption energies alone. Conclusively, we investigate in threonine on Ge (100) surface system that the "O-H dissociated-N dative bonded structure" and the "O-H dissociation bonded structure" are preferred at low coverage and high coverage.