• 한국표면공학회지
• /
• 제22권4호
• /
• pp.179-184
• /
• 1989

This study seeks to the morphological changes in the oxide skin of the Al-10wt.%si alloy melts. These changes depend on the oxidation time and the temperature of the molten alloy, as well as the effects of adding Mg, Cu and Ni. Thess affects observed by X-ray diffractometer(XRD) and scanning electron microscope(SEM)' Very litte oxide skins on Al-10wtwt.%Si alloy melts can be detected by XRD because it is less than the measuring capabillity of the XRD, or the formation of noncrystalline oxide skins oxide skins canbe deteced by SEM. The addition of 1%Mg and 1%Cu-1%Mg-2.5%Ni to this base alloy crystallized the structure of the oxide skins and increased the oxidation in proportion to the length of time, but adding 3% had hardiy anyaffect at all on the crystal structure of the oxide skins.

• 한국주조공학회지
• /
• 제20권1호
• /
• pp.38-45
• /
• 2000

The remelting for recycling or thin aluminum scrap, such as aluminum chip generally involves melting of these pieces submerged in molten salt flux. In this study, the effects of salt flux compositions and alloying elements on the aluminum dropletscoalescence and oxide film removal were studied in 99.8%Al, Al-1.01%Cu, Al-1.03%Si, and Al-1.38%Mg alloys as a function of holding time at $740^{\circ}C$ Salt fluxes based on NaCl-KCl(1:1) with addition of 5wt.% fluorides(NaF, $Na_3AlF_6$, $CaF_2$) or 5 wt.% chloride($MgCl_2$, $AlCl_3$) were used. The experimental results show that NaCl-KCl(1:1) with addition of 5 wt.% fluorides exhibits better coalescence ability than that with chlorides. The oxide film is not removed by NaCl-KCl(1:1) with addition of 5 wt.%chlorides, while it is removed by NaCl-KCl(1:1) with addition of 5 wt.% fluorides. The aluminum droplets coalescence and oxide film removal by salt fluxes are related to interfacial tension tension between metal and salt flux.

• Environmental Analysis Health and Toxicology
• /
• 제15권3호
• /
• pp.61-67
• /
• 2000

Toxic lesions of styrene in the Japanese Medaka (Oryzias latipes) were compared with those of styrene oxide, the active metabolite of styrene, using embryo-larval assays. The developmental stages of Japanese Medaka (Oryzias latipes) treated with both chemicals were not altered and progressed normally. However, styrene oxide was more toxic than styrene in terms of causing death and lesions . High concentrations of styrene (higher than 4.9 ppm) and styrene oxide (higher than 2.4 ppm), resulting in more than 50% mortality, caused similar lesions of cardiovascular system, craniofacial bone formation and spinal deformities, although a number of lesions were not observed by both chemicals . In the group treated with styrene, eyeball sizes and intereye distances were reduced, while, in the group treated with styrene oxide , the eyes and eye cups were not developed and two eyes were sometimes fused. In addition, styrene oxide caused the lesion which involved the posterior brain and brain stem were herniated through the spinal cord . The noticeable difference of toxic symptoms between these two chemicals was the time of onset. Toxicities of cardiovascular system and craniofacial bone formation appeared on day 3 of development in styrene oxide treated group, but, styrene treated group staned to show hemorrhages on day 3 and the craniofacial malformation were appeared on day 5, These differences between two chemicals may be due to the metabolism of styrene to styrene oxide, the reactive intermediate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.900-903
• /
• 2003

Using $DV-X{\alpha}$ method, it is calculated that nickel reduces the energy band gap of manganese oxide in 3 additives of titanium, nickel and tin. Therefore, it is estimated that the electrical conductivity of manganese-nickel oxide has the lowest value in 3 kinds of manganese oxide. The manganese oxide and manganese-nickel oxide which were produced by anodic deposition under $30mA/cm^2$ at room temperature in manganese sulfate and manganese-nickel sulfate solution were thermal-analyzed by DTA and TGA. The weight change of manganese oxide continuously decreased below $508^{\circ}C$ and kept constant at $518{\sim}600^{\circ}C$. However, the manganeses-nickel oxide transformed at the temperature range of $510{\sim}537^{\circ}C$. It is observed that the nickel addition to manganese oxide increases transformation temperature and its range.

• Toxicological Research
• /
• 제11권2호
• /
• pp.303-308
• /
• 1995

Nitric oxide, a physiological transmitter, is reported to mediate cellular injury in various tissues. Its reactivity to free radical is believed to be one of the reasons for its involvement in cytotoxicity. Menadione, a representative quinone, is cytotoxic to several cell systems including isolated hepatocyte, endothelial cell and red blood cells. Its toxic mechanism is related to oxidative stress, mediated by toxic free radicals. Our previous studies demonstrated that menadione induced cell lysis and increase of oxygen consumption in platelets. It has been reported that platelets have nitric oxide producing enzyme, nitric oxide synthase. Thus, we have investigated to manifest the role of nitric oxide.in menadione-induced cytotoxicity in rat platelets. Menadione induced cytotoxicity in platelets was unaffected by $N^G$-nitro-arginine methyl ester (L-NAME), selective and competitive inhibitor of nitric oxide synthase. We also invesitgated the role of extracellular nitric oxide in menadione-induced cytotoxicity of platelets by addition with sodium nitroprusside (SNP). SNP did not affect platelet cytotoxicity by menadione. These results suggested that nitric oxide which was generated endogeneously or exogeneously might have a negligible role in menadione-induced cytotoxicity in rat platelets.

• 공업화학
• /
• 제18권6호
• /
• pp.618-624
• /
• 2007

Cu/Fe/Zr 혼합 산화물 매체 상에서의 2단계 열화학 메탄 개질 반응을 고정층 적외선 반응로를 이용하여 수행했다. 첫 번째 단계에서 금속 산화물은 CO, $H_2$ 및 환원된 금속 산화물을 생성하기 위하여 1173 K의 온도에서 메탄으로 환원되었다. 두번째 단계에서 환원된 금속 산화물은 $H_2$와 금속 산화물을 생성하기 위하여 973 K의 온도에서 재산화되었다. 본 연구에서는 Cu/Fe/Zr 혼합 산화물 내 Cu 첨가량에 따른 반응 특성과 사이클 반응을 평가하였다. Cu/Fe/Zr 혼합 산화물 매체 내 Cu 첨가량 증가에 따라 첫 번째 단계에서 $CH_4$ 전환율, $CO_2$로의 선택성 및 $H_2/CO$ 몰 비는 증가하였으며, CO로의 선택성은 감소하는 경향을 나타냈다. 한편, 두 번째 단계에서 $H_2$ 생성량은 Cu 첨가량 증가에 따라 감소하는 것으로 나타났다. Cu의 첨가량이 x = 0.7인 $Cu_xFe_{3-x}O_4/ZrO_2$ 매체는 내구성이 우수한 매체임을 지시하듯이 10회의 사이클 순환 반응에서 우수한 재생 성능을 나타냈다. 더 나아가 물 분해 단계에서 침적된 탄소의 가스화 반응은 매체 내 Cu 첨가에 의해 촉진되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.549-552
• /
• 1998

Recently, the gate oxide damage induced by the plasma processes has been one of the most significant reliability issues as the gate oxide thickness falls below 10 nm. The process-induced damage was studied with the metal antenna test structures. In addition to the electron trapping, the hole trapping in a 10 nm thick gate oxide due to the plasma-induced charging was observed in the NMOS's with a metal antenna. The hole trapping gave rise to the decrease of the transconductance (gm) similarly to the case of the electron trapping, but to the extent much less than the electron trapping. It would be because the electrical stress that the plasma-induced charging forced to the gate oxide for the devices with the hole trapping was much smaller than for those with the electron trapping. This hypothesis was strongly supported by the measured characteristics of the Fowler-Nordheim current in the gate oxide.

• 한국분말재료학회지
• /
• 제9권1호
• /
• pp.32-37
• /
• 2002

In the present study of IGC (Inert Gas Condensation) evaporation-condensation processing study, the effects of IGC convection gas on the crystallographic structure, size and shape of tin oxide nanoparticles were investigated. In addition, the phase transformation of tin oxide nanoparticles was studied after heat treatment. IGC processing was conducted at 1000℃ for 1 hr. The mixture gas of oxygen and helium was used as a convection gas. Metastable tetragonal SnO nanoparticles were obtained at a lower convection gas pressure, whereas amorphous tin oxide nanoparticles were obtained at a higher one. The formation of amorphous phase could be explained by the rapid quenching of the vaporized atoms. The resultant nanoparticles size was about 10 nm with a rounded shape. The tin oxide nanoparticles prepared by IGC were almost transformed to the stable tetragonal SnO₂ after heat treatment.

• Macromolecular Research
• /
• 제16권7호
• /
• pp.659-662
• /
• 2008

A new and useful poly(ethylene oxide)-based pH-sensitive block copolymer is introduced. Poly(ethylene oxide-b-N-phenylmaleimide) was first synthesized by anionic polymerization of N-phenylmaleimide (N-PMI) using mixed alkali metal polymeric alkoxide by sequential monomer addition method in the mixture of benzene/THF/DMSO (10/5/3, v/v/v) at room temperature. Reductive deimidation of the resulting block copolymer was performed using hydrazine monohydrate leading to the formation of the corresponding pH-sensitive poly(ethylene oxide-b-maleic acid).

• Applied Biological Chemistry
• /
• 제34권4호
• /
• pp.386-392
• /
• 1991

Propene으로부터 propylene oxide를 생산하기 위하여, methane 자화성 세균인 Methylosinus trichosporium OB3b를 이용하였다. 이 균주는 methane을 methanol로 전환시키는 methane monooxygenase를 가지고 있는데, 이 효소는 또한 propene을 propylene oxide로 전환시킬 수 있다. 이 균주의 휴지세포를 이용하여 propene으로부터 propylene oxide 생산의 최적조건을 검토하였다. 최적 pH는 7.0이었으며, 최적온도는 $35^{\circ}C$이었다. 최종산물인 propylene oxide는 propylene oxide의 생산반응을 저해하지 않았으며, 더 이상 대사되지도 않았다. Methane 대사중간물질들(methanol, formaldehyde, formic acid)의 첨가는 propylene oxide의 생산을 $3{\sim}4$배 증가시켰으며, 특히 methanol 첨가의 경우에 가장 좋은 효과를 보였다. 상기의 최적조건하에서, 1시간 반응시 propylene oxide의 최대 생산량은 14.2 mM이었으며, 이 때 공급한 propene으로부터 propylene oxide로의 전환율은 약 8.0%이었다.