• 전기화학회지
• /
• 제20권1호
• /
• pp.1-6
• /
• 2017

본 연구에서는 구리 배선 공정에서 구리 씨앗층 표면에 형성되는 구리 자연산화물을 제거하는 표면 전처리가 후속 구리 전착에 미치는 영향을 살펴보았다. 구리 배선 공정의 화학적 기계적 연마 공정에서 사용하는 citric acid 기반의 용액을 구리 표면 전처리 과정에 적용하여 표면에 존재하는 구리 자연 산화물을 제거하였고, 용액 조성 변화를 통해 산화물 제거의 선택성을 높여 구리 씨앗층의 손실을 최소화하였다. 또한 표면 전처리 후 구리 전해 전착과 무전해 전착을 시도하여 전착한 박막의 비저항, 표면 거칠기 등의 성질을 비교하고, 이를 통해 선택적으로 구리 산화물을 제거한 이후에 전착된 박막의 비저항과 표면 거칠기가 가장 낮게 나타남을 확인하였다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2000년도 Proceedings of 5th International Joint Symposium on Microeletronics and Packaging
• /
• pp.109-109
• /
• 2000

Recently, carbon nanotube has been investigating for field emission display ( (FED) applications due to its high electron emission at relatively low electric field. However, the growing of carbon nanotube generally requires relatively high temperature processing such as arc-discharge (5,000 ~ $20,000^{\circ}C$) and laser evaporation (4,000 ~ $5,000^{\circ}C$) methods. In this presentation, low temperature growing of carbon nanotube by plasma enhanced chemical vapor deposition (PECVD) using nickel catalyst which is compatible to conventional FED processing temperature will be described. Carbon n notubes with average length of 100 run and diameter of 2 ~ $3\mu$ill were successfully grown on silicon substrate with native oxide layer at $550^{\circ}C$using nickel catalyst. The morphology and microstructure of carbon nanotube was highly depended on the processing temperature and nickel layer thickness. No significant carbon nanotube growing was observed with samples deposited on silicon substrates without native oxide layer. This is believed due to the formation of nickel-silicide and this deteriorated the catalytic role of nickel. The formation of nickel-silicide was confirmed by x-ray analysis. The role of native oxide layer and processing parameter dependence on microstructure of low temperature grown carbon nanotube, characterized by SEM, TEM XRD and R없nan spectroscopy, will be presented.

• 한국정보통신학회논문지
• /
• 제10권3호
• /
• pp.473-478
• /
• 2006

DC 마그네트론 스퍼터링 방법으로 ITO 박막을 형성하였다. 박막 형성 시 스퍼터 전압을 변화시켜 음이온에 의한 손상을 최소화하였으며, 또한 기판온도와 산소유입량을 변화시켜 비저항 $1.6\times10^{-4}{\Omega}cm$, 광투과도 90% 이상의 값을 갖는 양질의 박막을 형성 할 수 있었다. 박막 형성 시 $O_2$ 가스의 유량이 4sccm 이상으로 산소공급이 과다할 경우는 ITO 박막의 비저항이 증가하고, 광 투과도가 포화됨을 알 수 있었다.

• 한국재료학회지
• /
• 제11권1호
• /
• pp.15-19
• /
• 2001

유리기판 위에 열화학증착법으로 투명전도성 산화주석막을 제조하였다. 박막은 원료물질로 tetramethyltin(TMT), 산화제로 산소나 오존이 포함된 산소의 혼합물로부터 제조되었다 제조된 박막은 기판온도에 따라 물성이 크게 변하였고 최적화된 박막은 TMT 유랑 8 sccm, 산소유량 150 sccm, 기판온도 $380^{\circ}C$에서 제조되었다. 오존을 사용함으로서 기판온도를 약 $180^{\circ}C$정도 낮출 수 있었고 비저항은 ~$10^{ -2}{\Omega}cm$에서 ~$10^{-3}{\Omega}cm$으로 감소시킬 수 있었다.

• 한국진공학회지
• /
• 제22권1호
• /
• pp.26-30
• /
• 2013

고유전율 절연체의 한 종류인 산화알루미늄 박막을 전자빔 증착법으로 형성하는 과정에서 산소 이온 빔의 조사를 이용, 산소 이온 빔 보조 증착 효과를 기대하였다. 산소 이온 보조 증착법으로 형성된 산화 알루미늄 박막의 두께 측정 결과, 높은 에너지에서의 이온 빔에 의한 식각 효과를 확인할 수 있었으며, 산소 이온 보조 증착 결과보다 높은 커패시턴스 값도 관찰할 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.926-929
• /
• 2007

A significant progress has been made in the characterization of zinc oxide (ZnO) semiconductor as a new semiconductor layer instead of amorphous Si semiconductor used in thin film transistor due to its high electron mobility at low deposition temperature which is quite suitable for flexible display and OLED devices. The wet pattering of ZnO is another important issue with regard to mass production of ZnO thin film transistor device. However, the wet behavior of ZnO thin film in aqueous wet etching solutions conventionally used un TFT industry has not been reported yet, in this work, wet corrosion behavior of RF magnetron sputtered ZnO thin film in various wet solutions such as phosphoric and nitric acid solutions was studied using by electrochemical analysis. The effects of deposition parameters such as RF power and oxygen partial pressure on corrosion rate are also examined.

• 한국진공학회지
• /
• 제5권1호
• /
• pp.54-61
• /
• 1996

Indium-tin oxide (ITO) films were deposited on the glass substrate by the reactive -ionized cluster beam deposition(ICBD) method. In the oxygen atmosphere, indium cluster formed through the nozzle is ionized by the electron bombardment and is accelerated to be deposited on the substrate. And tin is simultaneoulsy evaporated from the boron-nitride crucible. The chracteristics of films were examined by the X-ray photoelectron spectroscopy(XPS), glancing angle X-ray diffractrion(GXRD) and the electrical properties. were measured by 4-point-probe and Hall effect measurement system . From the XPS spectrum , it was found that indium and tin atoms combined with the oxygen to form oxide$(In_2O_3, SnO_2)$. In the case of films with high tin-concentration, the GXRD spectra show that the main $In_2O_3$ peak of (222) plane, but also sub peaks((440) peak etc.) and $SnO_2$ peaks were detected. From that results, itis concluded that the heavily dopped tin component (more than 14 at. %) disturbs to form $In_2O_3$(222) phase. Four-point-probe and Hall effect measurement show that, in the most desirable case, the transmittance of the films is more then 90% in visible range and its resistivity is $$\rho$=3.55 \times10^{-4}\Omega$cm and its mobility is $\mu$=42.8 $\textrm{cm}^2$/Vsec.

• 한국전기전자재료학회논문지
• /
• 제12권1호
• /
• pp.56-61
• /
• 1999

Highly conductive oxide films of BaRuO$_3$ have been grown heteroepitaxially on (100) LaAlO$_3$ single crystalline substrates by using pulsed laser deposition. The films are c-axis oriented with an in-plane epitaxial relationship of <010><100>BaRuO$_3$ // <110>LaAlO$_3$. Atomic force microscopy (AFM) observation shows that they consist of a fine-arranged network of grains and have a mosaic microstructure. Generally temperature-dependent resistivity shows the transition from metallic curve to semiconductor-metallic twofold curve by the deposition conditions for Ru oxide based materials like SrRuO$_3$, CaRuO$_3$, BaRuO$_3$, etc.. This twofold curve comes from the structural similarity of Ru oxide based materials including BaRuO$_3$. We find that the distance of Ru-Ru bonding in the unit cell of BaRuO$_3$ as well as the grain boundary scattering could be the two important causes of these interesting conductive properties.

• 한국진공학회지
• /
• 제9권1호
• /
• pp.30-35
• /
• 2000

Indium-Tin Oxide (ITO) thin films were deposited on the commercial glass substrate by rf-magnetron sputtering. The ITO films with the thickness of 2,000~2,400 $\AA$ were prepared by changing the oxygen partial pressures of 2, 3, and 5%, as well as by changing the substrate temperature of $300^{\circ}C$ and $500^{\circ}C$. spectrophotometer, XRD, SEM, AFM, 4-point probe and Hall effect system were employed to characterize the ITO films. The optimum deposition conditions were the substrate temperature of $500^{\circ}C$ and oxygen partial pressure of 2-3%. At theses conditions, the ITO film showed the transmittance of 91%, the resistivity of $5.4\times10^{-3}\Omega$cm, the carrier concentration of $1.0\times10^{19}\textrm{cm}^{-3}$, and the carrier mobility of 150$\textrm{cm}^2$/Vsec. In XRD spectra, the (222) and (400) $In_2O_3$ planes were dominant under the optimum deposition conditions When the substrate was cleaned only by the method of ultrasonic cleaning without both pre-annealing and chemical treatment of the substrate, the ITO film exhibited the transmittance of 86%, the carrier concentration of $5.4\times10^{19}\textrm{cm}^{-3}$ and the mobility of 24$\textrm{cm}^2$/Vsec.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2008년도 추계학술발표대회 및 제15회 신소재 심포지엄
• /
• pp.23.1-23.1
• /
• 2008