• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.185-192
• /
• 2010

The chemical-looping combustion(CLC) has advantages of no energy loss for separation of $CO_2$ without $NO_x$ formation. This CLC system consists of oxidation and reduction reactors where metal oxides particles are circulating through these two reactors. In the present study, the reaction kinetic equations of iron oxide oxygen carriers supported on bentonite have been determined by the shrinking core model. Based on the reactivity data, design values of solid circulation rate and solids inventory were determined for the rector. Two types of interconnected fluidized bed systems were designed for CLC application, one system consists of a riser and a bubbling fluidized bed, and the other one has a riser and two bubbling fluidized beds. Solid circulation rates were varied to about $30kg/m^2s$ by aeration into a loop-seal. Solid circulation rate increases with increasing aeration velocity and it increases further with an auxiliary gas flow into the loop-seal. As solid circulation rate is increased, solid hold up in the riser increases. A typical gas leakage from the riser to the fluidized bed is found to be less than 1%.

• Korean Journal of Medicinal Crop Science
• /
• v.18 no.5
• /
• pp.323-328
• /
• 2010

Root extract of Lythrum salicaria reported a hepato-protective effect on $CCl_4$-induced liver toxicity of rat was prepared into fractions such as n-hexane up layer (HA), n-hexane down layer (HB), diethyl ether (E), ethylacetate (EA), n-butanol (B) and water (W). Fractions prepared were tested their activities in vitro and in vivo condition. All of the fractions showed effective antioxidant asctivities on DPPH radical and $CuSO_4$-induced oxidation of human low density lipoprotein and E fraction showed the highest inhibitory effect (98.1% at $50\;{\mu}g/m{\ell}$) on linoleic acid autoxidation at $40^{\circ}C$, which was more effective than $\alpha$-tocopherol (82.4%). Five fractions (H = HA plus HB, E, EA, B, and W, 150 mg/kg/day) were fed into Sprague Dawley, male rats for 4 days, which were intoxicated with intra-peritoneal injection of carbon tetrachloride ($1\;m{\ell}/kg$ in corn oil) at the 4th day and were sacrificed in 24 hrs. Serum tumor necrosis factor-alpha (TNF-$\alpha$), a proinflammatory cytokine, elevated with $CCl_4$-intoxication in negative control group ($83\;pg/m{\ell}$) was significantly decreased in E fraction-supplemented group ($18\;pg/m{\ell}$). Cu, Zn-superoxide dismutase (SOD) activity increased in negative control group (0.12 U/mg protein) was decreased in E fraction (0.07 U/mg protein). From the results, it is suggested that ether fraction from root extract of L. salicaria would be a potent antioxidant candidate for ameliorating liver injury induced by chemical intoxicant.

• Journal of Life Science
• /
• v.31 no.8
• /
• pp.778-785
• /
• 2021

The germination of cucumber seeds begins with the degradation of reserved oil to fatty acids within the lipid body, which are then further metabolized to acyl-CoA. The acyl-CoA moves from the lipid body to the glyoxysome following β-oxidation for the production of acetyl-CoA. As an initial carbon source supplier, acetyl-CoA is an essential molecule in the glyoxylate cycle within the glyoxysome, which produces the metabolic intermediates of citrate and malate, among others. The glyoxylate cycle is a necessary metabolic pathway for oil seed plant germination because it produces the metabolic intermediates for the tricarboxylic acid (TCA) cycle and for gluconeogenesis, such as the oxaloacetate, which moves to the cytosol for the initiation of gluconeogenesis by phophoenolpyruvate carboxykinase (PEPCK). Following reserved oil mobilization, the production and transport of various metabolic intermediates are involved in the coordinated operation and activation of multiple metabolic pathways to supply directly usable carbohydrate in the form of glucose. Furthermore, corresponding gene expression regulation compatibly transforms the microbody to glyoxysome, which contains the organelle-specific malate synthase (MS) and isocitrate lyase (ICL) enzymes during oil seed germination. Together with glyoxylate cycle, carnitine, which mediates the supplementary route of the acetyl-CoA transport mechanism via the mitochondrial BOU (A BOUT DE SOUFFLE) system, possibly plays a secondary role in lipid metabolism for enhanced plant development.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.3
• /
• pp.164-171
• /
• 2014

A highly sensitive and selective non-enzymatic glucose sensor has gained great attention because of simple signal transformation, low-cost, easily handling, and confirming the blood glucose as the representative technology. Until now, glucose sensor has been developed by the immobilization of glucose oxidase (GOx) on the surface of electrodes. However although GOx is quite stable compared with other enzymes, the enzyme-based biosensors are still impacted by various environment factors such as temperature, pH value, humidity, and toxic chemicals. Non-enzymatic sensor for direct detecting glucose is an attractive alternative device to overcome the above drawbacks of enzymatic sensor. Many efforts have been tried for the development of non-enzymatic sensors using various transition metals (Pt, Au, Cu, Ni, etc.), metal alloys (Pt-Pb, Pt-Au, Ni-Pd, etc.), metal oxides, carbon nanotubes and graphene. In this paper, we show that Ni-based nano-particles (NiNPs) exhibit remarkably catalyzing capability for glucose originating from the redox couple of $Ni(OH)_2/NiOOH$ on the surface of ITO electrode in alkaline medium. But, these non-enzymatic sensors are nonselective toward oxidizable species such as ascorbic acid the physiological fluid. So, the anionic polymer was coated on NiNPs electrode preventing the interferences. The oxidation of glucose was highly catalyzed by NiNPs. The catalytically anodic currents were linearly increased in proportion to the glucose concentration over the 0~6.15 mM range at 650 mV versus Ag/AgCl.

• Clean Technology
• /
• v.23 no.2
• /
• pp.121-132
• /
• 2017

The increase of greenhouse gases and the concern of global warming instigate the development and spread of renewable energy and hydrogen is considered one of the clean energy sources. Hydrogen is one of the most elements in the earth and exist in the form of fossil fuel, biomass and water. In order to use hydrogen for a clean energy source, the hydrogen production method should be eco-friendly and economic as well. There are two different hydrogen production methods: conventional thermal method using fossil fuel and renewable method using biomass and water. Steam reforming, autothermal reforming, partial oxidation, and gasification (using solid fuel) have been considered for hydrogen production from fossil fuel. When using fossil fuel, carbon dioxide should be separated from hydrogen and captured to be accepted as a clean energy. The amount of hydrogen from biomass is insignificant. In order to occupy noticeable portion in hydrogen industries, biomass conversion, especially, biological method should be sufficiently improved in a process efficiency and a microorganism cultivation. Electrolysis is a mature technology and hydrogen from water is considered the most eco-friendly method in terms of clean energy when the electric power is from renewable sources such as photovoltaic cell, solar heat, and wind power etc.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.5
• /
• pp.84-93
• /
• 2012

Most of the studies on reduction of buildings' environmental burden in the construction industry have been focused on carbon dioxide emission, although there are various kinds of environmental issues such as global warming, acidification, and etc. which are considered by many researchers. Therefore, this study defined and suggested six impact categories and the principles to assess each impact for the assessment of comprehensive environmental impacts of buildings. The six impact categories are abiotic depletion, global warming, ozone layer depletion, acidification, eutrophication, and photochemical oxidation. A case study has been conducted through comparative analysis of two structural design alternatives to confirm the necessity of assessing the six impact categories. That is, the results of global warming potential and the six impacts proposed in this study were compared. By comparing the results of only global warming potential, the second design alternative using 24MPa concrete was chosen as a better alternative, while the first design alternative using 21MPa concrete was resulted as a better alternative when six impact categories were considered. The results mean that the assessment of various environmental impacts is an appropriate and reasonable approach and the comprehensive assessment offers more reliable results of environmental impacts in the building construction.

• Economic and Environmental Geology
• /
• v.23 no.2
• /
• pp.201-213
• /
• 1990

Mineralogy, chemistry, physical property, and fossil abundance have been studied for the samples collected from three weathering profiles, two from the Duho Formation and one from the Hagjeon Formation in the Tertiary sediments in the Pohang area. The mineralogy of the samples from the Duho Formation shows somewhat different from that of the Hagjeon Formation. Kaolinite is more abundant and shows higher crystallinity in samples from the Duho Formation than those in the Hagjeon Formation, but clay mineral assemblage in each weathering profile remain fairly constant with depth. This difference in mineral distribution seems to be inherited from original source materials. It indicates that little or not severe leaching has been taking place in these three weathering profiles. Weathering indicies indicate different degrees of susceptibility to chemical weathering in these two formations. The Duho Formation has a higher degree of susceptibility to weathering than that of the Hagjeon Formation which is mainly due to differences in clay mineral assemblages in both formations. A noticeble colour difference between oxidized and unoxidized zones in each profile can be easily recognized which is definetely due to different decomposition rate organic carbon by various oxidation state from surface to bottom of the profile. Weathering process have also intensively influenced microfossil preservation about up to 7-10 m in depth in the Duho Formation. Consequently, characteristics observed at weathering surface should be used as a subsidiary tool in setting geologic boundary or establishing formation. Great care must be taken to choose sampling site for microfossil study.

• 한국해양학회지
• /
• v.30 no.4
• /
• pp.341-354
• /
• 1995

Fluorescence characteristic and amino acids composition of organic matter were determined from extracted seawater samples at eight stations in the East Sea of Korea. Organic compounds have been extracted onto C-18 Sep-Pak cartridges. Three dimensional excitation/emission fluorescence contouring of extracts showed two markedly distinct characterized fluoroscopies representing protein-like biomacromolecule and humic-like geomacromolecule. Protein-like biomacromolecule showing fluorescence maxima at 280 nm/330 nm (excitation/emission) were abundant in the surface mixed layer and then apparently decreased below the thermocline at most stations. It suggests that source of biomacromolecule is comely related with vigorous biological synthetic activity in the surface layer and bacteria decompose its biologically labile components near the thermocline and in the deeper layer. On the other hand, humiliate geomacromolecule showing fluorescence maxima at 330 nm/430 nm (excitation/emission) were low in the surface mixed layer implying photochemical oxidation and then increased below the thermocline at most stations. It suggests that geomacromolecule might be transformed by condensation of bio-refractoryorganic fraction after decomposition of biomacromolecule and particulate organic carbon derived from the surface mixed layer. HPLC measurements of amino acids showed similar composition between seawater and extracted organic macromolecule after hydrolysis. Glycine, serine and alanine were predominant, accounting for more than 50% of total amino acids. Dissolved free amino acids of seawater were more abundant in the surface layer(0.7∼1.8 uM) than the deeper layer (0.2∼0.4 uM). D/L racemic ratio of alanine of extracted organic matter showed lower value in the surface layer than the deeper layer. It suggests that biomacromolecule predominant in the surface layer is relatively young, rapidly recycling and biologically labile.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.2
• /
• pp.73-83
• /
• 2014

In order to investigate selective phase transformations and to determine the maximum Au leaching factors from microwave treated Au-bearing complex sulfides, a microscope, SEM-EDS analysis, and thiocyanate leaching tests were performed. When the Au-bearing complex sulfides were exposed to microwave heating, increasing the microwave exposure time increased temperature and decreased weight. Arsenopyrite was first selectively transformed to hematite, which formed a concentric rim structure. In this hematite, oxygen and carbon was detected and always showed high iron content and low arsenic content due to arcing and oxidation from microwave heating. The results of the leaching test using microwave treated sample showed that the maximum Au leaching parameters was reached with 0.5 g concentration thiocyanate, 2.0 M hydrochloric acid, 0.3 M copper sulfate and leaching temperature at$60^{\circ}C$. Under the maximum Au leaching conditions, 59% to 96.69% of Au was leached from the microwave treated samples, whereas only 24.53% to 92% of the Au was leached from the untreated samples.

• Journal of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.509-519
• /
• 1987

The tetradentate Schiff base ligand, 3,4-bis(salicylidene diimine) toluene, have been prepared by the reaction of salicylaldehyde with 3,4-diaminotoluene by Duff method. The Schiff base ligand reacts with Ni(II), Co(II), and Cu(II) ions to form new complexes, [Ni(o-BSDT)${\cdot}(H_2O)_2$], [Co(o-BSDT)${\cdot}(H_2O)$], and [Cu(o-BSDT)]. It seems that Ni(II) and Ni(II) complexes are hexacoordinated with the Schiff base ligand and two molecules of water, while the Cu(II) complexes are tetracoordinated with the Schiff base. The mole ratio of tetradentate Schiff base ligand to metals was found to be 1 : 1. The redox chemistry of these complexes was investigated by polarography and cyclic voltammetry with glassy carbon electrode in DMSO with 0.1M TEAP${\cdot}$[Ni(o-BSDT)${\cdot}(H_2O)_2$] hav EC reaction mechanisms which undergo a irreversible electron transfer followed by a fast chemical reaction. [Co(o-BSDT)${\cdot}(H_2O)_2$] undergoes a reduction of Co(II) to Co(I) and a oxidation of Co(II) to Co(III), and [Cu(o-BSDT)] undergoes a reduction of Cu(II) to Cu(I).