• 대한화장품학회지
• /
• 제40권2호
• /
• pp.203-214
• /
• 2014

시중에 유통 중인 산화형 염모제 28건을 대상으로 접촉성피부염 유발 성분 함량 조사를 수행하여, 관련분야에 기초자료를 제공하고자 본 연구를 수행하였다. 접촉성피부염을 유발하는 물질로 산화염료 10종(p-phenylenediamine, toluene-2,5-diamine, m-phenylenediamine, nitro-p-phenylenediamine, p-aminophenol, m-aminophenol, o-aminophenol, p-methylaminophenol, N,N'-bis(2-hydroxyethyl)-p-phenylenediamine sulfate, 2-methyl-5-hydroxyethylaminophenol)과 중금속 4종(니켈; Ni, 크롬; Cr, 코발트; Co, 구리; Cu)을 선정하였다. 10종의 접촉성피부염 유발 산화염료의 함량조사를 위하여 헥산-2% 아황산나트륨을 이용하여 빠르고 간단하게 시료전처리를 하였고, 초고성능액체크로마토그래피를 이용하여 분석시간이 12 min으로 짧은 동시분석조건을 확립하였다. 분석 결과 10종의 산화염료 성분은 제품에 표기된 성분이 모두 확인되었고, 각 성분의 농도는 의약품등 표준제조규정에 제시된 사용할 수 있는 농도상한 이하로 나타났다(식품의약품안전처 고시 제2013-228호). 또한, 4종의 중금속성분을 확인하기 위하여 microwave를 이용하여 시료를 분해하였고, 유도결합플라즈마분광계를 이용하여 정량 분석하였다. 각 제품에서 중금속별 검출량은 Ni 0.572 ${\mu}g/g$, Cr 3.161 ${\mu}g/g$, Co 2.029 ${\mu}g/g$, Cu 0.420 ${\mu}g/g$이었다. 염모제의 성상별 중금속 농도를 비교한 결과 분말타입(헤나) 염모제의 평균 중금속 농도는 Ni 1.800 ${\mu}g/g$, Cr 10.127 ${\mu}g/g$, Co 7.082 ${\mu}g/g$, Cu 1.451 ${\mu}g/g$로 거품타입이나 크림타입 보다 높았다. 염모제를 흑색, 흑갈색, 갈색, 짙은 갈색, 옅은 갈색, 붉은 갈색의 6개 색상으로 구분하여 분석한 결과, 갈색의 경우 Co 농도가 가장 높고 나머지 색상에서는 모두 Cr의 농도가 높은 것을 알 수 있었다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2003년도 춘계학술대회 논문집
• /
• pp.29-31
• /
• 2003

The 1,3-bis(4-aminoaryl)squaraines showed colour change behaviour, they were found to undergo reduction with sodium borohydride in solution to give colourless leuco compounds, which oxidised readily in air back to the coloured squaraine dye. We have shown that oxidation of the parent leuco-squaraines gives the neutral squaraine system. Initial observations indicated that the derivatives gave new long-wavelength absorbing chromophores, and It is interesting to note that the onidation of the leuco squaraines did initially produce a species absorbing at longer wavelengths than the parent squaraine dye. This colour-change redox behaviour has potential in the area of peroxidase-based bioassays and artificial camouflage.

• 한국안전학회지
• /
• 제13권2호
• /
• pp.96-103
• /
• 1998

The treatment of the wastewater of Carmine-6B Process was studied using an electrochemical batch reactor with Pt-electrodes. The concentration of azo dye was exponentially decreased unto 6-37% residuum during 50 hr operations. The fractional conversion was not influenced by the initial pH value, but it was increased with increasing the rotating speed and/or temperature of the electrolyte. It was observed by the differential method of rate analysis that the rate of the oxidation reaction at anode was exponentially increased with increasing the cell voltage. The pH of the wastewater was changed from acid or alkali to neutral. The COD of the solution was increased at the beginning of the treatment, but it was decreased soon.

• 공업화학
• /
• 제27권3호
• /
• pp.227-238
• /
• 2016

본 리뷰 논문은 지지화된 또는 고정화된 금속들 중 선택적 알코올 산화 반응에 적용된 나노 크기의 여러 금속 촉매들에 대해 집중적으로 서술한다. 금속 나노 촉매들은 넓은 표면적을 지닌 고체 지지체들의 표면 위에 금속 나노 입자들의 고른 분산을 통해 얻어진다. 이러한 나노 촉매들은 유기 합성, 연료 전지, 바이오 디젤 생산, 오일 크래킹, 에너지변환 및 저장, 의약, 수처리, 고체 로켓 추진체, 염료 제조 등 학문적 산업적 측면 모두 다양하게 사용될 수 있다. 더욱이, 응용성이 풍부한 중간체들을 생산하는 호기성 알코올 산화 반응에서 금속 나노 재료는 촉매로써 매우 중요하다. 금, 팔라듐, 류테늄, 바나디움 등과 같은 지지화된 금속 나노 촉매들의 알코올 산화 반응은 기존의 화학 당량적 반응과 달리 비용을 경감시키고 부반응물들을 줄임으로써 경제적이고 친환경적이다. 뿐만 아니라, 상온에서 진행된 나노 촉매 알코올 산화 반응에 대해서도 소개된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권10호
• /
• pp.888-893
• /
• 2016

In this study, the solution plasma process was utilized with the aim of degrading synthetic dyes in water at atmospheric pressure. The experiments were conducted in a batch-type reactor consisting of a symmetric wire-wire electrode configuration with rhodamine B (RhB) as the target synthetic dye. The effects of the plasma treatment time and initial dye concentration on the RhB degradation were investigated by monitoring the change in absorbance of RhB solutions. The RhB solutions turned lighter in color and finally colorless with prolonged plasma treatment time, indicating the destruction of dye molecules. The RhB solutions were found to have degraded, following the first-order kinetic process. However, for high initial RhB concentrations, another kinetic process or factor seems to play a dominant role at the initial degradation stage. The fitted first-order rate constant decreased as the initial concentration increased. This result suggests that the degradation behavior and kinetic process of the RhB solution strongly depends on its initial concentration. The RhB degradation is considered to be due to a combination of factors, including the formation of chemically oxidative species, as well as the emission of intense UV radiation and high-energy electrons from the plasma. We believe that the solution plasma process may prove to be an effective and environment-friendly method for the degradation or remediation of synthetic dye in wastewater.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.87-87
• /
• 2010

Photoelectrochemical (PEC) systems are promising methods of producing H2 gas using solar energy in an aqueous solution. The photoelectrochemical properties of numerous metal oxides have been studied. Among them, the PEC systems based on TiO2 have been extensively studied. However, the drawback of a PEC system with TiO2 is that only ultraviolet (UV) light can be absorbed because of its large band gap (3.2 - 3.4 eV). Two approaches have been introduced in order to use PEC cells in the visible light region. The first method includes doping impurities, such as nitrogen, into TiO2, and this technique has been extensively studied in an attempt to narrow the band gap. In comparison, research on the second method, which includes visible light water splitting in molecular photosystems, has been slow. Mallouk et al. recently developed electrochemical water-splitting cells using the Ru(II) complex as the visible light photosensitizer. the dye-sensitized PEC cell consisted of a dye-sensitized TiO2 layer, a Pt counter electrode, and an aqueous solution between them. Under a visible light (< 3 eV) illumination, only the dye molecule absorbed the light and became excited because TiO2 had the wide band gap. The light absorption of the dye was followed by the transfer of an electron from the excited state (S*) of the dye to the conduction band (CB) of TiO2 and its subsequent transfer to the transparent conducting oxide (TCO). The electrons moved through the wire to the Pt, where the water reduction (or H2 evolution) occurred. The oxidized dye molecules caused the water oxidation because their HOMO level was below the H2O/O2 level. Organic dyes have been developed as metal-free alternatives to the Ru(II) complexes because of their tunable optical and electronic properties and low-cost manufacturing. Recently, organic dye molecules containing multi-branched, multi-anchoring groups have received a great deal of interest. In this work, tri-branched tri-anchoring organic dyes (Dye 2) were designed and applied to visible light water-splitting cells based on dye-sensitized TiO2 electrodes. Dye 2 had a molecular structure containing one donor (D) and three acceptor (A) groups, and each ended with an anchoring functionality. In comparison, mono-anchoring dyes (Dye 1) were also synthesized. The PEC response of the Dye 2-sensitized TiO2 film was much better than the Dye 1-sensitized or unsensitized TiO2 films.

• 한국식품과학회지
• /
• 제34권6호
• /
• pp.977-983
• /
• 2002

식용색소 및 공업용 염료의 인공적 착색여부를 조사한 결과, 심황색소, 식용희석황색소, 마리골드색소, 식용황색 4호, 안나토색소, 카로틴색소는 유사한 색으로 착색되었으며 다른 색소는 착색되지 않았다. 물에 의한 추출시험에서는 참조기 색소와 식용색소황색 제4호는 물에서 용출되지 않았다. 착색 후 색소의 물성실험을 한 결과 물 젖은 가제수건이나 휴지로 색소부위 표피를 문지를 경우 참조기 색소는 표면에 전혀 묻어 나오지 않으나 인공적으로 착색된 색소의 경우에는 물에 의해 색이 뚜렷하게 묻어 나왔으며 참조기의 착색 부위 표피를 아세톤으로 추출할 경우 참조기 색소는 아세톤에 옅은 황색용액으로 추출되었다. 또한, 참조기의 색소처럼 물에 용출되지 않도록 염착이 가능한 공업적 합성염료인 반응성 염료와 분산염료의 착색거동에 대해 실험한 결과, 반응성 염료는 조기에 착색되지만 물 젖은 휴지로 착색부위를 문지를 경우 색소가 용출되었고, 아세톤에는 추출되지 않아 참조기 색소와는 쉽게 판별되었으며 분산염료는 염료가 고르게 착색되지 않고 염료가 입자를 형성하며, 물 적신 휴지로 색소부위를 문지를 경우 색소가 용출됨을 알 수 있었다. 카로틴색소(참조기 색소와 구조가 유사한 색소)와 azo염료의 산화 환원 반응에 따른 소색 반응에서는 산화반응에서 azo염료는 sodium percarbonate와 peracetic acid에서는 소색이 되지 않았으나, fenton시약에서는 1시간 후 소색되었고, sodium hypochlorite에서는 바로 소색되었다. 이에 비하여 카로틴색소는 sodium percarbonate 및 fenton시약에서는 소색되지 않았으나, sodium hypochlorite에서는 2시간 후 소색되었고, peracetic acid에서는 바로 소색되었다. 또한, sodium hydrosulfite, sodium carbonate를 사용한 환원반응시험에서는 azo염료는 소색되었으나, 카로틴색소는 소색되지 않았다. 이러한 결과를 통해 두 색소의 특징적 group을 제거할 때 나타나는 소색 결과를 토대로 진품참조기와 모조참조기의 판별에 이용할 수 있을 것으로 사료된다.

• 한국염색가공학회지
• /
• 제13권5호
• /
• pp.1-1
• /
• 2001

As the basic study to investigate the mechanism of improvement in the dyeing fastness of natural dyes on silk fabrics the optical behavior of tannin solution, the optimal condition of tannin treatment and the changes of the physical structure of silk fabrics were studied in the treatment of tannin. Results obtained were as follows ; 1.The K/S values of tannin-treated silk fabrics were not changed by tannin content on silk fabrics but yellowing of tannin in treatment condition. 2. As the concentration of tannin was increased in its treating condition, the tannin content and K/S vague of tannin-treated silk fabrics were increased. 3. Because tannin gave rise to yellowing by hydrolysis and oxidation at high temperature, the higher tannin-treating temperature was, the lower the tannin content and K/S values of silk fabrics 4. The tannin content of silk fabric was higher in acidic treating condition and the highest K/S value was showed at pH 5. 5. As the tannin content of silk fabric was increased, the value of ζ -potential of it became negative. 6. As the tannin content of silk fabric was increased, the crystallinity and crystallite size of it were decreased. This meant that the fraction of amorphous region in the fibers increased. And the degree of orientation of it was decreased with the tannin treatment.

• 한국염색가공학회지
• /
• 제13권5호
• /
• pp.289-297
• /
• 2001

As the basic study to investigate the mechanism of improvement in the dyeing fastness of natural dyes on silk fabrics the optical behavior of tannin solution, the optimal condition of tannin treatment and the changes of the physical structure of silk fabrics were studied in the treatment of tannin. Results obtained were as follows ; 1 The K/S values of tannin-treated silk fabrics were not changed by tannin content on silk fabrics but yellowing of tannin in treatment condition. 2. As the concentration of tannin was increased in its treating condition, the tannin content and K/S vague of tannin-treated silk fabrics were increased. 3. Because tannin gave rise to yellowing by hydrolysis and oxidation at high temperature, the higher tannin-treating temperature was, the lower the tannin content and K/S values of silk fabrics 4. The tannin content of silk fabric was higher in acidic treating condition and the highest K/S value was showed at pH 5. 5. As the tannin content of silk fabric was increased, the value of $\xi$ -potential of it became negative. 6. As the tannin content of silk fabric was increased, the crystallinity and crystallite size of it were decreased. This meant that the fraction of amorphous region in the fibers increased. And the degree of orientation of it was decreased with the tannin treatment.

• 한국염색가공학회지
• /
• 제17권1호
• /
• pp.7-13
• /
• 2005

Continuous and intense UV irradiation on PTT film using two types of UV bulbs at different irradiation power level was carried out to modify surface characteristics of the film including zeta potential, wettability, surface energy, and dyeability. ESCA analysis of the irradiated film showed higher O/C ratio than the untreated film indicating photooxidation of outer surface layer. ATR analysis showed that the ester bonds were broken and some new groups were produced such as carboxylic acid, phenolic hydroxy, and other esters, implying that ester bonds of PTT was responsible for the observed photooxidation effect. The surface of the treated PTT film became more hydrophilic and wettable to water, coupled with increased surface energy. Polar component of the surface energy increased and nonpolar component decreased with increasing irradiation energy. The treatment also decreased zeta potential of the modified surface and nanoscale roughness increased with increasing irradiation. The dyeability of the treated films to catonic dyes was significantly improved by electrostatic and polar interaction between dye molecules and the anionic film surface. The UV irradiation seems to be a viable polymer surface modification technology, which has advantages such as no vacuum requirement and continuous process unlike plasma treatment.