• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.11
• /
• pp.826-833
• /
• 1988

In this paper we studied the control of overload which could bring the degradation of performance and threaten the stability of the electronic switching system. In order to get the essential requirement for overload control algorithm, we tried to extract the characteristics of commonly used algorithms by means of simulating overload control alogrithms in numerical stored program control switching model. As the result, we could find that the overload control algorithm which monitored the CPU occupancy had the best call complete rate and good response characteristecs and the algorithm using the offered load as a system state variable had a good grade of service which was represented by a short dial tone delay and 3rd quartile of deal tone delay. however, these control algorithms have no generality and need to get the control parameters by the trial-and-error method. We suggested the guidelines on the design of the overload control algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.4
• /
• pp.952-960
• /
• 1996

In this paper, a new overload control scheme is proposed for a control system in ATM switching system. The proposed control scheme includes a counter that conunts the number of accepted calls and is decreased at cach D time interval. In overload condition of call processor, the control scheme detects over load condition when the counter value reaches a certain threshold value. Under overload condition, processor utilization is measured and the value of the D is updataed according to the difference between measured processor utilization and target utilization. A new call is accepted accepted only if the value of the counter is less than the threshold value. In overflow condition of cell traffic, accept probability of new call is reduced exponetially according to the elapsed time. The results of simulation show that the proposed overload contorl scheme maintains the target utilization very well under the various processor overload conditions and reduces the cell loss probability under the cell overflow conditions.

• Journal of applied mathematics & informatics
• /
• v.8 no.1
• /
• pp.285-295
• /
• 2001

We consider a queueing system under overload control to support bursty traffic. The queueing system under overload control is modelled by MMBP/D1/K queue with two thresholds on buffer. Arrival of customer is assumed to be a Markov-modulated Bernoulli process (MMBP) by considering burstiness of traffic. Analysis is done in discrete-time case. Using the generating function method, we obtain the stationary queue length distribution. Finally, the loss probability and the waiting time distribution of a customer are given.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.1
• /
• pp.110-122
• /
• 1993

When voice is transmitted through packet switching network, there needs a overload control, that is, a control for the congestion which lasts short periods and occurrs in local extents. In this thesis, we analyzed the performance of the statistical packet voice multiplexer using the overload control strategy by bit dropping. We assume that the voice is coded accordng to (4,2) embedded ADPCM and that the voice packet is generated and transmitted according to the procedures in the CCITT recomendation G. 764. For the performance analysis, we must model the superposed packet arrival process to the multiplexer as exactly as possible. It is well known that interarrival times of the packets are highly correlated and for this reason MMPP is more suited for the modelling in the viewpoint of accuracy. Hence the packet arrival process in modeled as MMPP and the matrix geometric method is used for the performance analysis. Performance analysis is similar to the MMPP IG II queueing system. But the overload control makes the service time distribution G dependent on system status or queue length in the multiplexer. Through the performance analysis we derived the probability generating function for the queue length and using this we derived the mean and standard deviation of the queue length and waiting time. The numerical results are verified through the simulation and the results show that the values embedded in the departure times and that in the arbitrary times are almost the same. Results also show bit dropping reduces the mean and the variation of the queue length and those of the waiting time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7B
• /
• pp.440-449
• /
• 2005

This paper proposes the measurement scheme for network overload and the control technique in case of breaking several control channels when we support the call services of DAMA through communication satellite(GEO, Geostationary Earth Orbit). And its performance is analyzed. The proposed schemes measure the overload of access control channel of a network controller to control the call connections, detect the level of network overload, notify the terminals of DAMA network of the state, and excute overload control. As a result, it improves the system performance and the network stability at overload state. Moreover hysteresis is applied to the change of overload state for the restriction of the frequent state shifts. The results show that the proposed algorithm prevents excessive increment of call-setup delay and too much lowering of call success rate, and improves the network stability.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1079-1088
• /
• 2018

A line overload emergency control strategy based on the source-load synergy coefficient is proposed in this paper. First, the definition of the source-load synergy coefficient is introduced. When line overload is detected, the source-load branch synergy coefficient and source-load distribution synergy coefficient are calculated according to the real-time operation mode of the system. Second, the generator tripping and load shedding control node set is determined according to the source-load branch synergy coefficient. And then, according to the line overload condition, the control quantity of each control node is determined using the Double Fitness Particle Swarm Optimization (DFPSO), with minimum system economic loss as the objective function. Thus load shedding for the overloaded line could be realized. On this basis, in order to guarantee continuous and reliable power supply, on the condition that no new line overload is caused, some of the untripped generators are selected according to the source-load distribution synergy coefficient to increase power output. Thus power supply could be restored to some of the shedded loads, and the economic loss caused by emergency control could be minimized. Simulation tests on the IEEE 10-machine 39-bus system verify the effectiveness and feasibility of the proposed strategy.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.969-973
• /
• 1987

Ess provides the means to detect, control, and alleviate various system overload conditions. System overload occurs when excessive demands are made on any of the three basic system resources which are hardware, software, and real time. This paper describes the overload control strategy used in No.1A ESS and shows the system status according to traffic load.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1578-1586
• /
• 1994

In this paper, a new overload control scheme is proposed for a stored program control system. The proposed control scheme is fit for a distributed architecture. In a distributed architecture, most of the call control functions are distributed to many subscriber control processors(SP) and some functions as number translation and routing control are centralized to central processors(CP). Therefore the performance of the CP is critical to the switching system. We needed a control scheme that ensures the proper operation of the CP in overload condition. We conducted lots of simulation experiments to evaluate the performance of the proposed overload control scheme and concluded that the proposed overload control scheme is very effective for a distributed architecture.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.6
• /
• pp.79-88
• /
• 1997

New technologies, systems, and services in telecommunication have increased the need for an efficient and robust control mechanism to protect switching systems from overload. To achieve proper control, it is necessary to find a set of parameters that can describe the system. However, it is difficult to find types of data that can form a suitable basis for control. In this paper, we categorize the load status of a switching system into three classes (i.e., normal state, pre-overload state, and overload state) and formulate the overload detection as a classification problem. We find the relationships between the load classes and a set of monitored switching system parameters by applying a fuzzy rule-generation method. The rules are automatically generated from training data. Simulation results involving a switching system is given.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.703-710
• /
• 2010

In this paper, an overload detecting algorithm for an excavator is presented. The proposed overload detecting algorithm is based on the time series analysis especially correlation function. The main purpose of this paper is to prevent damage or crack from the fatigue loaded on an excavator in advance. Generally, the larger data, the longer processing time, and the amount of the data used in this paper are also large, especially every sampling period, 1600 data are gathered and calculated. So this paper focuses on minimizing the number of required sensors by using the correlation function. From the cross correlation function, similar pattern sensors are eliminated and dissimilar pattern sensors are considered, and from the auto correlation function, the overload can be detected. To prove the efficiency of the proposed overload detecting algorithm, this paper shows the computer simulation results.