• 대한토목학회논문집
• /
• 제30권3D호
• /
• pp.271-278
• /
• 2010

반강성 포장은 공극률이 큰 개립도 아스팔트 혼합물의 공극에 시멘트 페이스트를 침투시켜 아스팔트 포장의 연성과 콘크리트 포장의 강성을 동시에 이용하는 포장형식이다. 반강성 포장은 콘크리트 포장에 비해 평탄성이 좋고 주행에 의한 진동이나 소음을 저감할 수 있으며, 아스팔트 포장에 비해 소성변형이 적고 온도저감 효과가 있는 것으로 알려져 있다. 본 연구에서는 반강성 덧씌우기 포장을 시험시공하여 반강성 포장의 온도저감 효과를 조사하였고 시편을 제작하여 옥외에서 온도 및 중량을 측정하여 반강성 포장의 온도저감 및 보수 효과를 확인하였다. 상용 3차원 유한요소해석 프로그램인 Abaqus 6.8로 반강성 포장과 아스팔트 포장을 구조해석하여 하중재하 위치에서의 수평 및 연직방향 응력과 변형률을 비교하고 다층탄성해석 프로그램 Bisar 3.0으로 검증하였다. 구조해석 결과를 바탕으로 피로균열을 예측하여 반강성 포장과 아스팔트 포장의 공용성을 비교하였다.

• 한국환경생태학회지
• /
• 제22권2호
• /
• pp.119-127
• /
• 2008

본 연구는 북한산 국립공원을 대상으로 산사태 발생인자들에 대한 공간정보를 구축하였으며, 중첩분석 및 합산평가 매트릭스분석을 이용한산사태 취약성 지도 및 생태적 위험 지표 작성을 통해 향후산사태 재해 예방을 위한 기초자료를 제시하고자 하였다. 산사태 평가 인자로는 사면경사, 사면방향, 경사길이, 토양배수, 식생활력도(NDVI), 토지이용도가 선택되었으며, 공간데이터베이스는 $30m\times30m$ 해상도로 구축되었다. 분석결과, 우이동 및 도봉계곡 일대의 산사태 취약성이 높은 것으로 분석되었으며, 생태적 위험도는 도봉계곡, 용어천계곡 및 정릉계곡, 평창계곡 등이 높은 것으로 분석되어 향후 이들 지역의 관리계획 수립 시 산사태 위험에 대한 영향도 고려되어져야 할 것으로 판단된다.

• Spatial Information Research
• /
• 제11권4호
• /
• pp.391-407
• /
• 2003

최근 효율적 국토자원관리와 토지관리를 위해 국토정보와 토지관련 지적정보의 연계활용에 많은 관심이 모아지고 있으며, 도면정보로써 수치지도와 지적도를 포함하는 종합적인 정보체계의 구축에 많은 관심이 모아지고 있다. 본 연구에서는 수치지도와 지적도의 부정합 원인들에 대한 분석을 수행하고, 두 도면간의 정확한 중첩을 위해 지도의 변환에 활용되고 있는 대표적인 알고리즘에 대한 조사를 수행하여 중첩방안을 모색하였다. 또한 도면간 정합성 확보 방안에 대한 연구를 수행함으로써 수치지도와 지적도의 통합 데이터베이스 구축을 위한 기반을 마련하고 그 품질의 향상을 도모할 수 있는 방안을 제시하였다.

• 한국도로학회논문집
• /
• 제19권1호
• /
• pp.11-19
• /
• 2017

PURPOSES : The purpose of this study is to verify the property of self-healing, and to propose an appropriate duration for wet curing of bridge deck concrete overlays. METHODS : In this study, reinforced bars were inserted into concrete molds in order to prevent brittle fracture and induced cracks in the concrete resulting from indirect tension mode. The induced time of concrete cracking was 3 to 7 days, following which the concrete specimens were cured in water. The resulting concrete crack width was measured using image analysis equipment. Additionally, the self-healing tests were performed using the following three mixtures: OPC, SFC, and LMC. RESULTS : Concrete mixtures with crack widths of $150{\mu}m$ or lower were completely healed by Day 28. Hydrates of crack fills were found to be the calcium carbonate. CONCLUSIONS : The cement-based mixtures exhibit properties of self-healing. Considering these properties, it is necessary to increase the curing duration of concrete overlays for bridge decks.

• Structural Engineering and Mechanics
• /
• 제75권1호
• /
• pp.19-32
• /
• 2020

Due to repetitive traffic loadings and environmental attacks, reinforced concrete (RC) bridge deck slabs are suffering from severe degradation, which makes structural repairing an urgency. In this study, the fatigue performance of an RC bridge deck repairing technique using ultra-high performance fiber reinforcement concrete (UHPFRC) overlay is assessed experimentally with a wheel-type loading set-up as well as analytically based on finite element method (FEM) using a crack bridging degradation concept. In both approaches, an original RC slab is firstly preloaded to achieve a partly damaged RC slab which is then repaired with UHPFRC overlay and reloaded. The results indicate that the developed analytical method can predict the experimental fatigue behaviors including displacement evolutions and crack patterns reasonably well. In addition, as the shear stress in the concrete/UHPFRC interface stays relatively low over the calculations, this interface can be simply simulated as perfect. Moreover, superior to the experiments, the numerical method provides fatigue behaviors of not only the repaired but also the unrepaired RC slabs. Due to the high strengths and cracking resistance of UHPFRC, the repaired slab exhibited a decelerated deterioration rate and an extended fatigue life compared with the unrepaired slab. Therefore, the proposed repairing scheme can afford significant strengthen effects and act as a reference for future practices and engineering applications.

• 산업기술연구
• /
• 제27권A호
• /
• pp.103-110
• /
• 2007

Concrete is a material that will crack during its service life by its very nature. For bridge decks this is especially significant as these cracks allow accelerated ingress of chlorides and the subsequent corrosion of the reinforcing steel and deck deterioration. Very-early strength latex-modified concrete (below ; VES-LMC) was developed in order to realize early-opening-to-traffic bridge deck concrete. Although there has been little research to document the degree of cracking in VES-LMC overlay, there has been a general perception among highway agencies that overlay cracking of VES-LMC, particularly early-age cracking, is a one of problems which should be solved. The purpose of this study was to analyze the cause of map, transverse and longitudinal cracking in VES-LMC and to provide a control methods for minimizing the occurrence of cracks. The proposed prevention against map and transverse cracking was verified by field applications. VES cement was modified, the unit cement contents was reduced into $360kg/m^3$ from $390kg/m^3$, the maximum size of coarse aggregate was increase into 19mm from 13mm, wire mesh and steel fibers were incorporated in concrete mixture.

• 한국지진공학회논문집
• /
• 제25권1호
• /
• pp.21-32
• /
• 2021

Concrete masonry prisms are strengthened with steel fiber-reinforced mortar (SFRM) overlay and tested for compressive and diagonal tension strength. Masonry prisms are produced in poor condition considering standard workmanship for masonry buildings in Korea. Amorphous steel fibers are adopted for SFRM, and appropriate mixing ratios of SFRM are derived considering constructability and strength. Masonry prisms are strengthened with different fiber volume ratios, while numerous strengthened faces and additional reinforcing meshes are produced for compression and diagonal tension tests. Compression and diagonal tension strength are increased by up to 122% and 856%, respectively, and the enhancement effect for diagonal tension strength was superior compared to compression strength. Finally, the test results and strength prediction equations based on existing literature and regression analysis are compared.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2008년도 정기학술발표대회 논문집
• /
• pp.855-858
• /
• 2008

경량기포혼합토는 경량성으로 인해 구조물등에 작용하는 하중이 저감되어 연약지반의 뒷채움 재료로 사용되지만, 일반토사에 비하여 초기시공비용이 많이 소요되어 아직 국내에서는 적용하고 있지 않다. 주로 뒷채움 재료는 초기시공미가 적게 소요되는 일반토사를 사용하고 있으나, 일반토사의 덧씌우기 공법은 횟수가 증가함에 따라 사용연수가 감소된다. 특히 연약지반에 설치된 BOX구조물이나 교대 뒷채움 인근의 단차 발생 시 덧씌우기 공법은 일시적인 대체공법은 가능하지만, 덧씌우기 두께에 대한 하중만큼 추가 하중이 발생하게 되므로 결국 단차에 대한 해결책은 되지 못한다. 따라서 본 연구에서는 BOX구조물 뒷채움 재료인 일반토사와 경량기포혼합토의 두 가지 대안에 대하여 LCC 분석을 실시하며, 경제적 측면에서 보다 합리적인 의사결정을 할 수 있는 경제성 분석을 제시하고자 하였다. 그 결과 경량기포혼합토가 일반토사에 비해 초기시공비용은 많이 소요되지만 유지관리 측면에서는 비용이 더 적게 소요되어, 6년 이내에 경제성을 확보할 수 있는 것으로 분석되었다.

• Communications for Statistical Applications and Methods
• /
• 제18권4호
• /
• pp.549-557
• /
• 2011

In this paper, we apply cluster analysis to "Okayama parking data" that is one of the spatial point patterns data that includes locations and the fare structure of car parking space in Okayama central area. This study classifies the characteristics of small areas through Okayama parking data as well as visualizes the results of the cluster analysis. We develop web applications that connect the results of a cluster analysis and overlay objects including points of balloons and rectangles of small areas over a map of Okayama central area.

• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.85-94
• /
• 2013

PURPOSES: The performance of tack coat, commonly used for layer interface bonding, is affected by application rate and curing time. In this study, bonding strength tests were performed according to the application rate and curing time of asphalt emulsion. Based on finding from this study, optimum application rates and curing times are proposed. METHODS: In order to investigate bonding characteristic of asphalt emulsion, tests were performed on both asphalt concrete pavement and portland concrete pavement. Also, asphalt emulsions were tested at the application rate of 0, 0.2, 0.4, 0.6, and $0.8{\ell}/m^2$ and at the curing time of 0, 0.5, 1, 2, and 24 hours. Pull-off test and shear bonding strength test, which commonly used for bonding strength measurement of asphalt emulsion, were adopted for this study. To assess field performance under different testing condition, asphalt emulsions were applied to in-service pavement. Throughout coefficient of determination analysis between material index properties from asphalt emulsion and mechanical response from bonding strength tests, performance correlativity was analyzed. RESULTS: Test results show that optimum application rate for asphalt overlay on asphalt concrete pavement (AOA) and asphalt overlay on concrete pavement (AOC) was $0.4{\sim}0.5{\ell}/m^2$ and $0.3{\sim}0.5{\ell}/m^2$, respectively. According to the curing time increment, tensile strength and shear strength of AOC were increased to 22~44% and 20~39%, respectively. AOA case also show strength increment in tensile strength (42%) and shear strength (9%). We tested the applicability of tack coat materials at the field sites, and our findings demonstrated that the bonding (for D and E) and rapid curing (for B, C, and D, E) performances were superior than others. Among material index properties, there was a high correlation between penetration ratio and bonding strength test result. CONCLUSIONS : Result show that interlayer bonding strength was affected by asphalt emulsion type, application rate and curing time. AOC required slightly higher application ($0.1{\ell}/m^2$) than AOA. Both AOA and AOC cases show higher strength at longer curing time. Up to 2hours of curing, rapid strength increments were observed, but strength increment ratio was decreased after 2hours of curing. From the observed correlation between penetration ratio and bonding strength, it is expected that penetration ratio can be used as one of important factors affecting bonding strength analysis.