• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.615-626
• /
• 2018

To ensure a DC current path and avoid large voltage overshoot of the DC-link inductor, alternating PWM pulses in the current-source rectifier should be supplemented by overlap time, which generates an overlap current and causes input current distortion. In this study, the influence of overlap time is illustrated by comparing the AC-side current before and after overlap time is added. The overlap current distribution caused by overlap time is discussed under different modulation carriers, including triangle carrier, positive-going carrier, and negative-going carrier. The quantitative relationship between the extra harmonics of the AC-side current and overlap time is based on the Fourier analysis. Based on the commutation analysis, a new carrier modulation scheme that can restrain overlap current is proposed. A 3 kW prototype is established to verify the effectiveness of the influence of overlap time and the proposed restraining modulation scheme.

• Structural Engineering and Mechanics
• /
• 제62권5호
• /
• pp.631-642
• /
• 2017

Accurate actuator tracking plays an important role in real-time hybrid simulation (RTHS) to ensure accurate and reliable experimental results. Frequency-domain evaluation index (FEI) interprets actuator tracking into amplitude and phase errors thus providing a promising tool for quantitative assessment of real-time hybrid simulation results. Previous applications of FEI successfully evaluated actuator tracking over the entire duration of the tests. In this study, FEI with moving window technique is explored to provide post-experiment localized actuator tracking assessment. Both moving window with and without overlap are investigated through computational simulations. The challenge is discussed for Fourier Transform to satisfy both time domain and frequency resolution for selected length of moving window. The required data window length for accuracy is shown to depend on the natural frequency and structural nonlinearity as well as the ground motion input for both moving windows with and without overlap. Moving window without overlap shows better computational efficiency and has potential for future online evaluation. Moving window with overlap however requires much more computational efforts and is more suitable for post-experiment evaluation. Existing RTHS data from Network Earthquake Engineering Simulation (NEES) is utilized to further demonstrate the effectiveness of the proposed approaches. It is demonstrated that with proper window size, FEI with moving window techniques enable accurate localized evaluation of actuator tracking for real-time hybrid simulation.

• 정보과학회 논문지
• /
• 제45권3호
• /
• pp.200-210
• /
• 2018

여러 DNA 리드 시퀀스가 주어졌을 때, de novo 시퀀스 어셈블리는 레퍼런스 시퀀스 없이 하나의 시퀀스를 재조립한다. 재조립을 위해 de novo 시퀀스 어셈블리는 리드 사이의 모든 겹침을 계산하는 overlap 단계가 필요하다. Overlap 단계는 전체 연산 중 비용이 가장 많이 들기 때문에 어셈블리의 계산 성능을 좌우한다. 여러 분야에서 overlap 단계를 위한 연구가 많이 발표되고 있는데, 그 중 가장 최신의 세 연구 결과는 Readjoiner, SOF, Lim-Park 알고리즘이다. 최근 염기 분석기술의 큰 발전으로 DNA 리드 데이터 셋을 기존보다 저비용으로 대량 생산하는 것이 가능해져 DNA 리드 데이터 셋을 생성하는 여러 플랫폼들이 개발되었다. 각 플랫폼마다 생성하는 데이터 셋의 통계적 특성이 다르기 때문에 overlap 단계의 성능 평가 시 다양한 통계적 특성의 데이터 셋이 반영되어야 한다. 본 논문은 여러 통계적 특성을 가진 DNA 리드 데이터 셋을 이용하여 위의 세 알고리즘의 성능을 비교 분석한다.

• 정보처리학회논문지D
• /
• 제8D권6호
• /
• pp.813-822
• /
• 2001

본 논문에서는 시간지원 데이터를 과거 세그먼트, 현재 세그먼트, 그리고 미래 세그먼트로 분리한 저장 구조를 기반으로 하는 네 가지 데이터 이동 방법을 제안하였다. 제안한 데이터 이동 방법은 시간단위에 의한 이동 방법, LST-GET(Least valid Start Time-Greatest valid End Time)에 의한 이동 방법, AST-AET(Average valid Start Time-Average valid End Time)에 의한 이동 방법, 그리고 Min-Overlap에 의한 이동 방법이 있다. 각각의 이동 방법에서는 세그먼트의 경계값, 각 세그먼트에 저장되는 개체 버전 등을 정의하였다. 제안한 이동 방법에 대해서 사용자 질의에 대한 평균 응답 시간을 측정하였다. 실험결과, LLT(Long Lived Tuples)가 없는 경우에는 LST-GET에 의한 이동 방법, 그리고 AST-AET에 의한 이동 방법이 시간단위에 의한 이동 방법보다 성능이 우수하였다. LLT가 있는 경우에는 LST-GET에 의한 이동 방법의 성능이 저하되었다. AST-AET에 의한 이동 방법은 시간단위에 의한 이동 방법과 LST-GET에 의한 이동 방법보다 질의에 대한 성능이 우수하였다. Min-Overlap에 의한 이동 방법은 질의에 대한 평균 응답 시간에서 AST-AET에 의한 이동 방법과 비슷한 결과를 보였고, 공간 이용율 측면에서는 AST-AET에 의한 이동 방법보다 효율적이었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권2호
• /
• pp.63-76
• /
• 2009

A study on the interference effects of overlapping tandem rotors in forward flight is conducted using the time-marching free-wake panel method which adopts field velocity boundary integral formulation. The conventional boundary integral formulation is numerically unstable for the cases when the blade and the wake are in close proximity to each other. In order to avoid this problem, this study applies the field velocity method and modifies the boundary integration formulation. The improved method is used for the parametric study on the advance ratio and the distance between the rotors. These are the parameters that most affect the interference of the tandem rotor in forward flight. Comparison of the aerodynamic performance shows that the horizontal distance between the rotors negligibly influences the overlap-induced power factor for high advance ratio. In addition, it shows that the overlap-induced power factor is inversely proportional to the squared vertical distance between the rotors, and that the overlap-induced power factor increases to a certain extent and decrease back as the advance ratio increases.

• 한국산학기술학회논문지
• /
• 제4권1호
• /
• pp.22-26
• /
• 2003

Attenuated PSM lithography 공정에서 overlay margin 확보 및 side-lobe 제거를 위해 기존의 Cr shield 방식의 단점인 복잡한 mask 제작공정과 구조를 단순화하기 위한 방법으로 scattering bar 방식을 제안하였다. Scattering bar는 Cr 보조패턴처럼 완전히 빛을 차단하는 것이 아니라 약간의 빛을 투과시켜 보강된 intensity를 상쇄하므로 side-lobe를 억제하는 방법으로 metal pattern을 생성할 때 scattering bar도 동시에 만들어 mask제작에 필요한 공정횟수를 줄이고 mask구조 역시 단순하게 한다 그리고 동시에 DOF(depth of focus)를 향상시킨다. Background clear pattern의 경우에 발생하는 side-lobe도 scattering bar를 이용하여 효율적으로 제거되었다.

• Journal of Information Processing Systems
• /
• 제19권5호
• /
• pp.631-640
• /
• 2023

Short-text similarity calculation is one of the hot issues in natural language processing research. The conventional keyword-overlap similarity algorithms merely consider the lexical item information and neglect the effect of the word order. And some of its optimized algorithms combine the word order, but the weights are hard to be determined. In the paper, viewing the keyword-overlap similarity algorithm, the short English text similarity algorithm based on lexical chunk theory (LC-SETSA) is proposed, which introduces the lexical chunk theory existing in cognitive psychology category into the short English text similarity calculation for the first time. The lexical chunks are applied to segment short English texts, and the segmentation results demonstrate the semantic connotation and the fixed word order of the lexical chunks, and then the overlap similarity of the lexical chunks is calculated accordingly. Finally, the comparative experiments are carried out, and the experimental results prove that the proposed algorithm of the paper is feasible, stable, and effective to a large extent.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.129-133
• /
• 2007

Focused Ion Beam(FIB) systems is a useful tool for the fabrication of micro-nano scale structures. In this study, the effects of FIB etching on the Au microstructure are systematically investigated. As the fabrication parameters, ion dose, dwell time and beam overlap ratio are studied. First, the increases of Ga ion dose makes the milling yield higher and the sidewall of milling profile steeper. Dwell time is found to have little effects on the milling profile due to the relatively large milling area of $1\times1{\mu}m^2$ used in this study. However, beam overlap significantly affects not only milling rate but also milling profile. As the beam overlap ratio changes from positive to negative, the development of regular cross-stripe patterns at the bottom with low milling rate is observed.

• 소성∙가공
• /
• 제33권2호
• /
• pp.123-131
• /
• 2024

Plastic, the main material of FFF-type 3D printing, exhibits lower strength compared to metal. research aimed at increasing strength is needed for use in various industrial fields. This study analyzed three X-shape infill patterns(grid, lines, zigzag) with similar internal lattice structure. Moreover, tensile test considering weight and printing time was conducted based on the infill line multiplier and infill overlap percentage. The three X-shape infill patterns(grid, lines, zigzag) showed differences in nozzle paths, material usage and printing time. When infill line multiplier increased, there was a proportional increase in tensile strength/weight and tensile strength/printing time. In terms of infill overlap percentage, the grid pattern at 50% and the zigzag and lines patterns at 75% demonstrated the most efficient performance.

• 한국정밀공학회지
• /
• 제27권11호
• /
• pp.17-23
• /
• 2010

Titanium alloy is one of the hard processing materials made by the traditional manufacturing method because of the excellent mechanical strength. Ablation of titanium alloy is investigated by using a femtosecond laser which is a regenerative amplified Ti:sapphire laser with 1kHz repetition rate, 184fs pulse duration time and 785nm wavelength. Experiments are carried out under various ablation conditions with different pulse overlap ratios for the rectangular shape and micro hole. Test results show that the ablation characteristic according to pulse overlap ratio of titanium alloy seems to be as non-linear type at the different zone of energy fluence. The optimal condition of rectangular shape processing is obtained at the laser peak power 1.3mW, pulse overlap ratio of 90%, beam gap of $1\;{\mu}m$. The micro hole has a good quality from the pulse overlap ratio of 99% at the same laser peak power. With the optimal processing condition, the fine rectangular shape and micro hole without burr and thermal damage are achieved.