Browse > Article

The Femto Second Laser Induced Ablation on the Titanium Alloy for Various Beam Overlap Ratio  

Chung, Il-Young (Department of Mechanical Engineering, Inha Univ.)
Kang, Kyung-Ho (Department of Mechanical Engineering, Inha Univ.)
Kim, Jae-Do (Department of Mechanical Engineering, Inha Univ.)
Publication Information
Journal of the Korean Society for Precision Engineering / v.27, no.11, 2010 , pp. 17-23 More about this Journal
Abstract
Titanium alloy is one of the hard processing materials made by the traditional manufacturing method because of the excellent mechanical strength. Ablation of titanium alloy is investigated by using a femtosecond laser which is a regenerative amplified Ti:sapphire laser with 1kHz repetition rate, 184fs pulse duration time and 785nm wavelength. Experiments are carried out under various ablation conditions with different pulse overlap ratios for the rectangular shape and micro hole. Test results show that the ablation characteristic according to pulse overlap ratio of titanium alloy seems to be as non-linear type at the different zone of energy fluence. The optimal condition of rectangular shape processing is obtained at the laser peak power 1.3mW, pulse overlap ratio of 90%, beam gap of $1\;{\mu}m$. The micro hole has a good quality from the pulse overlap ratio of 99% at the same laser peak power. With the optimal processing condition, the fine rectangular shape and micro hole without burr and thermal damage are achieved.
Keywords
Femtosecond Laser; Ablation; Titanium Alloy; Pulse Overlap Ration; Energy Fluence;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Chichkov, B. N., Momma, C., Nolte, S., von Alvensleben, F. and Tunnermann, A., "Femtosecond, picosecond and nanosecond laser ablation of solids," Appl. Phys. A, Vol. 63, No. 2, pp. 109-115, 1996.   DOI   ScienceOn
2 Nolte, S., Momma, C., Jacobs, H., Tunnerrnann, A., Chichkov, B. N., Wellegehausen, B. and Welling, H., "Ablation of metals by ultrashort laser pulses," Journal of the Optical Society of America B, Vol. 14, No. 10, pp. 2716-2722, 1997.   DOI   ScienceOn
3 Preuss, S., Demchuk, A. and Stuke, M., "Subpicosecond UV laser ablation of metals," Appl. Phys. A, Vol. 61 , No. 1, pp. 33-37, 1995.   DOI   ScienceOn
4 Chung, I. Y., Kang, K. H. and Kim, J. D., "Ablation Drilling of Invar Alloy Using Ultrashort Pulsed Laser," International Journal of Precision Engineering and Manufacturing, Vol. 10, No. 2, pp. 11-16, 2009.   과학기술학회마을   DOI
5 Semerok, A., Chaleard, C., Detalle, V., Lacour, J. L., Mauchien, P., Meynadier, P., Nouvellon, C., Salle, B., Palianov, P., Perdrix, M. and Petite, G., "Experimental investigations of laser ablation efficiency of pure metals with femto, pico and nanosecond pulses," Applied Surface Science, Vol. 138, No. 1, pp. 311-314, 1999.   DOI   ScienceOn
6 Chung, I. Y., Kang, K. H., Kim, J. D., Sohn, I. B., Noh, Y. C. and Lee, J. M., "Characteristics of the Femto-second Pulsed Laser Ablation according to Feed Velocity on the Invar Alloy," Journal of Korean Society for Precision Engineering, Vol. 26, No. 3, pp. 25-31 , 2009.   과학기술학회마을
7 Oliveira, V., Ausset, S. and Vilar, R., "Surface micro/nanostructuring of titanium under stationary and non-stationary femtosecond laser irradiation," Applied Surface Science, Vol. 255, No. 17, pp. 7556-7560, 2009.   DOI   ScienceOn
8 Momma, C., Nolte, S., Chichkov, B. N., Alvensleben, F. V. and Tunnermann, A., "Precise laser ablation with ultrashort pulses," Applied Surface Scicnce, Vol. 109-110, pp. 15-19, 1997.   DOI
9 Vorobyev, A. Y. and Guo, C., "Femtosecond laser structuring of titanium implants," Applied Surface Science, Vol. 253, No. 17, pp. 7272-7280, 2007.   DOI   ScienceOn
10 Masahiro, T., Keita, A., Hitoshi, N., Masaki, H., Masahito, K., Nobuyuki, A. and Masayuki, F., "Periodic microstructures produced by femtosecond laser irradiation on titanium plate," Vacuum, Vol. 80, No. 11-12, pp. 1346-1350, 2006.   DOI   ScienceOn
11 Liu, X., Chu, P. K. and Ding, C., "Surface modification of titanium, titanium alloys, and related materials for biomedical applications," Materials Science and Engineering, Vol. 47, No. 3-4, pp. 49-121 , 2004.   DOI   ScienceOn
12 Shin, Y. J., Kim, D. W., Lee, E. S. and Kim, K. W., "The Develpoment of Polishing System a Magnetorheological Fluids," Journal of the Korea Society for Precision Engineering, Vol. 21, No. 7, pp. 46-52, 2004.   과학기술학회마을
13 Brunette, D. M., Tengvall, P., Textor, M. and Thomsen, P., "Titanium in medicine: material science, surface science, engineering, Biological Responses and Medical Applications," Springer, 2001.
14 Singh, R. and Khamba, J. S., "Comparison of slurry effect on machining characteristics of titanium in ultrasonic drilling," Journal of Materials Processing Technology, Vol. 197, No. 1-3, pp. 200-205, 2008.   DOI
15 Venkatakrishnan, K., Tan, B. and Sivakumar, N. R., "Sub-micron ablation of metallic thin film by femtosecond pulse laser," Optics & Laser Technology, Vol. 34, No. 7, pp. 575-578, 2002.   DOI   ScienceOn
16 Huang, H., Zheng, H. Y. and Lim, G. C., "Femtoseocnd laser machining characteristics of Nitinol," Applied Surface Science, Vol. 228, No. 1-4, pp. 201-206, 2004.   DOI