• Title/Summary/Keyword: Overlap time

Search Result 328, Processing Time 0.033 seconds

A New Overlap Current Restraining Method for Current-source Rectifier

  • Qin, Haihong;Liu, Qing;Zhang, Ying;Zhang, Xin;Wang, Dan
    • Journal of Power Electronics
    • /
    • v.18 no.2
    • /
    • pp.615-626
    • /
    • 2018
  • To ensure a DC current path and avoid large voltage overshoot of the DC-link inductor, alternating PWM pulses in the current-source rectifier should be supplemented by overlap time, which generates an overlap current and causes input current distortion. In this study, the influence of overlap time is illustrated by comparing the AC-side current before and after overlap time is added. The overlap current distribution caused by overlap time is discussed under different modulation carriers, including triangle carrier, positive-going carrier, and negative-going carrier. The quantitative relationship between the extra harmonics of the AC-side current and overlap time is based on the Fourier analysis. Based on the commutation analysis, a new carrier modulation scheme that can restrain overlap current is proposed. A 3 kW prototype is established to verify the effectiveness of the influence of overlap time and the proposed restraining modulation scheme.

Localized evaluation of actuator tracking for real-time hybrid simulation using frequency-domain indices

  • Xu, Weijie;Guo, Tong;Chen, Cheng
    • Structural Engineering and Mechanics
    • /
    • v.62 no.5
    • /
    • pp.631-642
    • /
    • 2017
  • Accurate actuator tracking plays an important role in real-time hybrid simulation (RTHS) to ensure accurate and reliable experimental results. Frequency-domain evaluation index (FEI) interprets actuator tracking into amplitude and phase errors thus providing a promising tool for quantitative assessment of real-time hybrid simulation results. Previous applications of FEI successfully evaluated actuator tracking over the entire duration of the tests. In this study, FEI with moving window technique is explored to provide post-experiment localized actuator tracking assessment. Both moving window with and without overlap are investigated through computational simulations. The challenge is discussed for Fourier Transform to satisfy both time domain and frequency resolution for selected length of moving window. The required data window length for accuracy is shown to depend on the natural frequency and structural nonlinearity as well as the ground motion input for both moving windows with and without overlap. Moving window without overlap shows better computational efficiency and has potential for future online evaluation. Moving window with overlap however requires much more computational efforts and is more suitable for post-experiment evaluation. Existing RTHS data from Network Earthquake Engineering Simulation (NEES) is utilized to further demonstrate the effectiveness of the proposed approaches. It is demonstrated that with proper window size, FEI with moving window techniques enable accurate localized evaluation of actuator tracking for real-time hybrid simulation.

Experimental Analysis of Recent Works on the Overlap Phase of De Novo Sequence Assembly (De novo 시퀀스 어셈블리의 overlap 단계의 최근 연구 실험 분석)

  • Lim, Jihyuk;Kim, Sun;Park, Kunsoo
    • Journal of KIISE
    • /
    • v.45 no.3
    • /
    • pp.200-210
    • /
    • 2018
  • Given a set of DNA read sequences, de novo sequence assembly reconstructs a target sequence without a reference sequence. For reconstruction, the assembly needs the overlap phase, which computes all overlaps between every pair of reads. Since the overlap phase is the most time-consuming part of the whole assembly, the performance of the assembly depends on that of the overlap phase. There have been extensive studies on the overlap phase in various fields. Among them, three state-of-the-art results for the overlap phase are Readjoiner, SOF, and Lim-Park algorithm. Recently, a rapid development of sequencing technology has made it possible to produce a large read dataset at a low cost, and many platforms for generating a DNA read dataset have been developed. Since the platforms produce datasets with different statistical characteristics, a performance evaluation for the overlap phase should consider datasets with these characteristics. In this paper, we compare and analyze the performances of the three algorithms with various large datasets.

Migration Method for Efficient Management of Temporal Data (시간지원 데이터의 효율적인 관리를 위한 이동 방법)

  • Yun, Hong-Won
    • The KIPS Transactions:PartD
    • /
    • v.8D no.6
    • /
    • pp.813-822
    • /
    • 2001
  • In this paper we proposed four data migration methods based on time segmented storage structure including past segment, current segment, and future segment. The migration methods proposed in this paper are the Time Granularity migration method, the LST-GET (Least valid Start Time-Greatest valid End Time) migration method, the AST-AET (Average valid Start Time-Average valid End Time) migration method, and the Min-Overlap migration method. In the each data migration method we define the dividing criterion among segments and entity versions to store on each segment. We measured the response time of queries for the proposed migration methods. When there are no LLTs (Long Lived Tuples), the average response time of AST-AET migration method and LST-GET migration method are smaller than that of Time Granularity migration method. In case of existing LLT, the performance of the LST-GET migration method decreased. The AST-AET migration method resulted in better performance for queries than the Time Granularity migration method and the LST-GET migration method. The Min-Overlap migration method resulted in the almost equal performance for queries compared with the AST-AET migration method, in case of storage utilization more efficient than the AST-AET.

  • PDF

Numerical Investigation on Overlap Effects of Tandem Rotors in Forward Flight

  • Lee, Jae-Won;Oh, Se-Jong;Yee, Kwan-Jung;Kim, Deog-Kwan
    • International Journal of Aeronautical and Space Sciences
    • /
    • v.10 no.2
    • /
    • pp.63-76
    • /
    • 2009
  • A study on the interference effects of overlapping tandem rotors in forward flight is conducted using the time-marching free-wake panel method which adopts field velocity boundary integral formulation. The conventional boundary integral formulation is numerically unstable for the cases when the blade and the wake are in close proximity to each other. In order to avoid this problem, this study applies the field velocity method and modifies the boundary integration formulation. The improved method is used for the parametric study on the advance ratio and the distance between the rotors. These are the parameters that most affect the interference of the tandem rotor in forward flight. Comparison of the aerodynamic performance shows that the horizontal distance between the rotors negligibly influences the overlap-induced power factor for high advance ratio. In addition, it shows that the overlap-induced power factor is inversely proportional to the squared vertical distance between the rotors, and that the overlap-induced power factor increases to a certain extent and decrease back as the advance ratio increases.

Scattering Bar Optical Proximity Correction to Suppress Overlap Error and Side-lobe in Semiconductor Lithography Process (Overlap Margin 확보 및 Side-lobe 억제를 위한 Scattering Bar Optical Proximity Correction)

  • 이흥주
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.4 no.1
    • /
    • pp.22-26
    • /
    • 2003
  • Overlap Errors and side-lobes have been simultaneously solved by the rule-based correction using the rules extracted from test patterns. Lithography process parameters affecting attPSM lithography process have been determined by the fitting method to the real process data. The correction using scattering bars has been compared to the Cr shield method. The optimal insertion rule of the scattering bal's has made it possible to suppress the side-lobes and to enhance DOF at the same time. Therefore, in this paper, the solution to both side-lobe and overlap Error has been proposed using rule-based confection. Compared to the existing Cr shield method, the proposed rule-based correction with scattering bars can reduce the process complexity and time for mask production.

  • PDF

Research on Keyword-Overlap Similarity Algorithm Optimization in Short English Text Based on Lexical Chunk Theory

  • Na Li;Cheng Li;Honglie Zhang
    • Journal of Information Processing Systems
    • /
    • v.19 no.5
    • /
    • pp.631-640
    • /
    • 2023
  • Short-text similarity calculation is one of the hot issues in natural language processing research. The conventional keyword-overlap similarity algorithms merely consider the lexical item information and neglect the effect of the word order. And some of its optimized algorithms combine the word order, but the weights are hard to be determined. In the paper, viewing the keyword-overlap similarity algorithm, the short English text similarity algorithm based on lexical chunk theory (LC-SETSA) is proposed, which introduces the lexical chunk theory existing in cognitive psychology category into the short English text similarity calculation for the first time. The lexical chunks are applied to segment short English texts, and the segmentation results demonstrate the semantic connotation and the fixed word order of the lexical chunks, and then the overlap similarity of the lexical chunks is calculated accordingly. Finally, the comparative experiments are carried out, and the experimental results prove that the proposed algorithm of the paper is feasible, stable, and effective to a large extent.

The ocused Ion Beam Etching Characteristic of Au (집속 이온빔 가공변수에 따른 Au 에칭 특성 연구)

  • Park, J.J.;Kim, S.D.
    • Transactions of the Korean Society of Machine Tool Engineers
    • /
    • v.16 no.5
    • /
    • pp.129-133
    • /
    • 2007
  • Focused Ion Beam(FIB) systems is a useful tool for the fabrication of micro-nano scale structures. In this study, the effects of FIB etching on the Au microstructure are systematically investigated. As the fabrication parameters, ion dose, dwell time and beam overlap ratio are studied. First, the increases of Ga ion dose makes the milling yield higher and the sidewall of milling profile steeper. Dwell time is found to have little effects on the milling profile due to the relatively large milling area of $1\times1{\mu}m^2$ used in this study. However, beam overlap significantly affects not only milling rate but also milling profile. As the beam overlap ratio changes from positive to negative, the development of regular cross-stripe patterns at the bottom with low milling rate is observed.

A Study on Tensile Strength Dependent on Variation of Output Condition of the X-shape Infill Pattern using FFF-type 3D Printing (융합 필라멘트 제조 방식의 3D 프린팅을 이용한 X자 형상 내부 채움 패턴의 출력 옵션 변화에 따른 인장강도 연구)

  • D. H. Na;H. J. Kim;Y. H. Lee
    • Transactions of Materials Processing
    • /
    • v.33 no.2
    • /
    • pp.123-131
    • /
    • 2024
  • Plastic, the main material of FFF-type 3D printing, exhibits lower strength compared to metal. research aimed at increasing strength is needed for use in various industrial fields. This study analyzed three X-shape infill patterns(grid, lines, zigzag) with similar internal lattice structure. Moreover, tensile test considering weight and printing time was conducted based on the infill line multiplier and infill overlap percentage. The three X-shape infill patterns(grid, lines, zigzag) showed differences in nozzle paths, material usage and printing time. When infill line multiplier increased, there was a proportional increase in tensile strength/weight and tensile strength/printing time. In terms of infill overlap percentage, the grid pattern at 50% and the zigzag and lines patterns at 75% demonstrated the most efficient performance.

The Femto Second Laser Induced Ablation on the Titanium Alloy for Various Beam Overlap Ratio (빔 중첩율에 따른 티타늄 합금의 펨토초 레이저 어블레이션)

  • Chung, Il-Young;Kang, Kyung-Ho;Kim, Jae-Do
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.27 no.11
    • /
    • pp.17-23
    • /
    • 2010
  • Titanium alloy is one of the hard processing materials made by the traditional manufacturing method because of the excellent mechanical strength. Ablation of titanium alloy is investigated by using a femtosecond laser which is a regenerative amplified Ti:sapphire laser with 1kHz repetition rate, 184fs pulse duration time and 785nm wavelength. Experiments are carried out under various ablation conditions with different pulse overlap ratios for the rectangular shape and micro hole. Test results show that the ablation characteristic according to pulse overlap ratio of titanium alloy seems to be as non-linear type at the different zone of energy fluence. The optimal condition of rectangular shape processing is obtained at the laser peak power 1.3mW, pulse overlap ratio of 90%, beam gap of $1\;{\mu}m$. The micro hole has a good quality from the pulse overlap ratio of 99% at the same laser peak power. With the optimal processing condition, the fine rectangular shape and micro hole without burr and thermal damage are achieved.