• 한국항공우주학회지
• /
• 제35권8호
• /
• pp.661-669
• /
• 2007

지면효과에 대한 수치해석을 위한 격자생성 과정에서 발생하는 어려움을 해소하기 위하여 중첩격자 기법을 이용한 수치해석 기법의 타당성에 대한 연구를 수행하고 그 신뢰성을 검증하였다. 지면효과가 있는 경우와 없는 경우 RAE 101 익형주위의 저속 난류 유동장에 대한 수치해석을 수행하였고 다중블록격자 기법과 중첩격자 기법을 적용한 수치해석 결과를 실험결과와 비교하였다. 이를 통하여 중첩격자 기법을 이용함으로써 지면효과에 대한 수치해석과정을 정확하고 격자생성 문제없이 효과적으로 수행할 수 있음을 보였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 컴퓨터소사이어티 추계학술대회논문집
• /
• pp.219-222
• /
• 2003

Increasingly, Grid technics are developed and demonstrated widely. These days, a point to be considered is that clients use Grid resources more easily. Grid Portals, based on standard Web technologies, are increasingly used to provide user interfaces for using Grid resources. But, due to lack of delegation capabilities in using Grid resources through Grid Portals, it is requested of the security mechanisms. That solution is to using Myproxy Server. Myproxy Server allows Grid user to use Grid resources being interact with Grid Portals. But, while users log in Grid Portals, we are faced with over the overlap of users credentials. This paper describes relationship between Portals and Myproxy, and proposes the way to solve the problem of the overlap of users credentials.

• 소성∙가공
• /
• 제33권2호
• /
• pp.123-131
• /
• 2024

Plastic, the main material of FFF-type 3D printing, exhibits lower strength compared to metal. research aimed at increasing strength is needed for use in various industrial fields. This study analyzed three X-shape infill patterns(grid, lines, zigzag) with similar internal lattice structure. Moreover, tensile test considering weight and printing time was conducted based on the infill line multiplier and infill overlap percentage. The three X-shape infill patterns(grid, lines, zigzag) showed differences in nozzle paths, material usage and printing time. When infill line multiplier increased, there was a proportional increase in tensile strength/weight and tensile strength/printing time. In terms of infill overlap percentage, the grid pattern at 50% and the zigzag and lines patterns at 75% demonstrated the most efficient performance.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.294-306
• /
• 2019

On the basis of the Computational Fluid Dynamics technique (CFD) combined with the overlap grid method, this paper establishes a numerical simulation method to study the problem of ice-propeller interaction in viscous flow and carries out a simulation forecast of the hydrodynamic performance of an ice-class propeller and flow characteristics when in the proximity of milling-shape ice (i.e., an ice block with a groove cut by a high-speed revolving propeller). We use a trimmed mesh in the entire calculation domain and use the overlap grid method to transfer information between the domains of propeller rotation calculation and ice-surface computing. The grid is refined in the narrow gap between the ice and propeller to ensure the accuracy of the flow field. Comparison with the results of the experiment reveals that the error of the hydrodynamic performance is within 5%. This confirms the feasibility of the calculation method. In this paper, we calculate the exciting force of the propeller, analyze the time domain of the exciting force, and obtain the curve of the frequency domain using a Fourier transform of the time-domain curve of the exciting force. The existence of milling-shape ice before the propeller can greatly disturb the wake flow field. Unlike in open water, the propeller bearing capacity shows a downward trend in three stages, and fluctuating pressure is more disordered near the ice.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.615-626
• /
• 2018

To ensure a DC current path and avoid large voltage overshoot of the DC-link inductor, alternating PWM pulses in the current-source rectifier should be supplemented by overlap time, which generates an overlap current and causes input current distortion. In this study, the influence of overlap time is illustrated by comparing the AC-side current before and after overlap time is added. The overlap current distribution caused by overlap time is discussed under different modulation carriers, including triangle carrier, positive-going carrier, and negative-going carrier. The quantitative relationship between the extra harmonics of the AC-side current and overlap time is based on the Fourier analysis. Based on the commutation analysis, a new carrier modulation scheme that can restrain overlap current is proposed. A 3 kW prototype is established to verify the effectiveness of the influence of overlap time and the proposed restraining modulation scheme.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.55-60
• /
• 1998

An elliptic grid generation scheme using Laplace's equations guarantees the resulting grids to be crossing-free as a result of maximum principle in its analytic form. Numerical results, however, often show the grid lines overlapping each other or crossing the boundaries, especially for very sharp convex corners. The cause of this problem is investigated, and it is found that this problem can be handled by properly modifying the coefficients of transformed Laplace's equations in the computational domain.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.193-198
• /
• 2006

It takes a lot of time and effort to generate grids for numerical analysis of problems with ground effect because the relative attitude and height of airfoil should be maintained to the ground as well as the inflow. A low Mach number preconditioned turbulent flow solver using the overlap grid technique has been developed and applied to the ground effect simulation. It has been validated that the present method using the multi-block grid gives us highly accurate solutions comparing with the experimental data of the RAE 101 airfoil in an unbounded condition. Present numerical method has been extended to simulate ground effect problems by using the overlapped grid system to avoid tedious work in generating multi-block grid system. An extended method using the overlapped grid has been verified and validated by comparing with results of multi-block method and experimental data as well. Consequently, the overlapped grid method can provide not only sufficiently accurate solutions but also the efficiency to simulate ground effect problems. It is shown that the pressure and aerodynamic centers move backward by the ground effect as the airfoil approaches to the ground.

• 대한방사선기술학회지:방사선기술과학
• /
• 제40권4호
• /
• pp.575-580
• /
• 2017

Moire artifact는 미세병변과 주파수 대역이 중첩되기 때문에 moire artifact를 제거하는 Image processing software를 사용할 경우 미세 병변의 손실을 가져올 수 있다. 본 연구에서는 SD(Sprague Dawley) Rat에 microcalcification과 microfracture와 같은 미세병변을 임의로 형성하여 영상화하고, reference 영상과 grid suppression software를 사용한 영상, optimizied grid 영상을 비교 분석하였다. 영상은 두 명의 영상의학과 전문의가 컨소시엄을 형성하여 판독하였고, 판독 결과 값은 McNemar's test 이용하여 평가하였다. 73개의 microcalcifications 중 Grid suppression후 13 cases에서, optimized grid를 사용한 영상은 3 cases에서 영상의 손실이 확인되어 Grid suppression후의 영상이 통계적으로 유의하게 영상 손실을 발생하고 있음을 보여주고 있다(p=0.021). 총 53개의 fracture line은 Grid suppression을 시행한 후 영상에서 19 cases가 영상의 손실을 보였고, optimized grid를 사용한 영상에서는 영상손실이 없는 것으로 판독되었다. 따라서 미세병변을 진단하는 영상에 있어 moire artifact를 제거하기 위한 grid suppression software 사용은 신중하게 고려되어야 할 것이다.

• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.30-38
• /
• 2014

The purpose of this study is to build and manage environment models with line segments from sonar range data on obstacles in unknown and varied environments. The proposed method therefore employs a two-stage data-transform process in order to extract environmental line segments from range data on obstacles. In the first stage, the occupancy grid extracted from the range data is accumulated to form a two-dimensional local histogram grid. In the second stage, a line histogram extracted from a local histogram grid is based on a Hough transform, and matching serves as a means of comparing each of the segments on a global line segments map against the line segments to detect the degree of similarity in the overlap, orientation, and arrangement. Each of these tests is formulated by comparing one of the parameters in the segment representation. After the tests, new line segments can be found at maximum-density cells in the line histogram, and they are composed onto the global line segment map. The proposed technique is demonstrated in experiments in an indoor environment.

• Journal of applied mathematics & informatics
• /
• 제7권3호
• /
• pp.773-785
• /
• 2000

In this paper an algorithm is presented based on the additive Schwarz method for steady groundwater flow in a porous medium. The subproblems in the algorithm correspond to the problem on a coarse grid and some overlapping subdomains. It will be shown that the rate of convergence is independent of the mesh parameters and discontinuities of the coefficients, and depends on the overlap ratio.