• 환경영향평가
• /
• 제23권5호
• /
• pp.353-363
• /
• 2014

본 연구의 목적은 가공송전선 인접 258개 시설과 120개의 고압 가공송전선, 17개의 지중화 송전선에서 자기장 방출량을 조사하였다. 또한 시뮬레이션을 이용하여 이격거리에 따른 ELF-MF 저감률을 파악하였다. 120개 고압 가공송전선의 전압 형태에 따라 자기장 방출량 조사한 결과, 154kV 고압송전선은 최소 60m, 345kV는 최소 80m, 765kV는 최소 100m 이격거리를 설정해야 고압송전선에서 발생하는 자기장 노출의 위해요인을 사전에 예방할 수 있을 것으로 나타났다. 극저주파 자기장의 방출량 시뮬레이션을 실시한 결과, 154kV의 경우 최대 부하가 걸린 시점에서 40m 이상, 345kV의 경우 60m 이격된 거리에서 4mG 이하로 나타났다. 환경영향평가학적 측면을 감안한 최악의 조건과 앞으로 증가될 전력 부하량을 감안하여 본 연구에서는 고압송전선로 최소 적정 이격거리는 70m 이상이 타당할 것이라 판단된다. 70m 내에 녹지대나 완충구역을 설정하여 수용체가 노출되지 않는 환경을 조성해야 차후 발생할 수 있는 극저주파 자기장 인체 위해성 관련 불안 요인을 제거할 수 있을 것으로 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.461-462
• /
• 2011

Overhead lines constitute an unnatural intrusion into the natural environment, and as such have an impact on it. In the case of birds, these impacts can be positive or negative, depending on the context and surrounding circumstances. Most of the negative impacts can be effectively addressed, provided the problem is well understood.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.254-259
• /
• 2005

Big fire such as mountain fire my cause the prevention of the functions of the overhead cables and insulators, which may affect the operation of the transmission lines. Therefore, in order to understand the effect of the mountain fire on the polymeric insulator for transmission lines, the author observed the deformation of the sheds of the polymeric insulators and the change of the discs of the porcelain insulators under fire, and investigated the electrical and mechanical characteristics of the insulators after the ignition test. As the result the following conclusions were obtained. First, the porcelain insulator was degraded in electrical characteristics when the insulator was subjected to the fire for approximately 5 minutes; whereas, the polymeric insulator was not degraded though there were some damage on its sheds. Second, after 20 minute exposure to the fire, the polymeric insulator lost a lot of parts of sheds, but the electrical characteristics was lowered by around 20%, but the porcelain insulators were electrically degraded by more than 80%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.696-698
• /
• 2007

As overhead transmission lines are exposed to the outdoor weather, lightning induced fault accounts for about 66% of faults in transmission lines. The lightning may cause the damage of power system apparatus or the shut down of electricity. Not only in order to decrease the damage of the power system itself but also to ensure the reliable power supply, an appropriate insulation design based on the long-term lightning statistics is required. Meanwhile, real time information of lightning might be more useful to quickly locate the point of lightning induced fault in the line, leading to minimization of the adverse effects derived from the fault. Korea Electric Power Corporation has been providing an on-line lightning information service, named as KLDNet, since 2006 in order to meet the need inside our company. This paper describes the development and application of the information system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.109-110
• /
• 2007

Most transmission lines pass through mountainous terrain and deep valleys, to avoid populated areas. Accordingly, the impact of climate changes, environmental conditions and system expansion have caused an increase in transmission line system fault rates. KEPCO has developed and applied phase-spacers to reduce contact faults between phases. Contact between phases represented 9% of total line faults before the devices were installed. Phase-spacers have reduced faults by up to 3.4% since the phase-spacers were installed in 2005. Also, recently developed devices provide additional economic benefits as they cost about a third of the price as similar devices introduced in foreign countries. Phase-spacers are an effective way to prevent phase contact accidents by maintaining physical space between phases. These spacers will be implemented in areas where contacts are likely to occur. They are expected to reduce accident rates and improve power quality.

• 조명전기설비학회논문지
• /
• 제22권4호
• /
• pp.85-92
• /
• 2008

많은 나라에서 가공 송전선로 아래에서 발생된 산불에 의해 계통 섬락사고를 일으키고 있다. 본 연구에서는 상용주파수 교류 및 직류 고전압을 인가하였을 때, 연소화염에 의해 전력선의 절연강도가 저하하는 특성을 조사하기 위해 수직배열 전력선에 대한 모의조건에서 다양한 실험을 수행하였다. 실험 결과, 화염이 없는 경우에 비해 연소 화염이 존재하면 화염의 거리(h)에 따라 절연파괴전압은 크게 저하되는 것으로 나타났다. 도체와 화염의 거리(h)가 작을수록 절연파괴전압이 감소하였으며, 교류전압 인가 시, h=9[cm]일 때 평균 46.2[%], h=3[cm]일 때 평균 62.5[%] 저하된 것으로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.151-159
• /
• 2003

According to the records, approximately 50 percent of power failure were caused by lightning. Conventional fault preventive measures against lightning include reduction of the footing resistance of the tower, multiplication of overhead ground wires and unbalanced insulation of the double circuit transmission tower. In addition to these, transmission line arresters have been recently appeared as an alternatives. In this paper an unbalanced insulation method with transmission line arrester was assumed as another countermeasure against simultaneous double circuit trip of 154 kV transmission line by lightning strike. The lightning performance of line arrester was compared with conventional insulation concept using different numbers of porcelain and glass insulator. Larger numbers of insulator simply increase flashover current level by lightning but the lightning performance doesn't proportional to it. EMTP simulation and predictive calculation of lightning failure rate were carried out to evaluate the performance.

• 전기학회논문지
• /
• 제59권5호
• /
• pp.847-853
• /
• 2010

This paper describes switching surge analysis for reclosing decision in 345kV combined transmission line with XLPE power cable. Reclosing operation should be decided based on the detailed technical analysis in combined transmission line because this line includes power cable section which is week on insulation. Insulation of power cable can be breakdown at the week point in case of reclosing moment. Therefore the detailed analysis has to be carried out by considering several conditions such as length ratio of power cable section, arrestor, inserting resistance, charging rate, grounding resistance, etc.. On the other hand sheath voltage on IJ(Insulated Joint) is analyzed to check dangerous condition on cable cover. Analysis is performed by EMTP/ATP. Analysis results show that reclosing can be operated as the single line-to-ground fault occurs on overhead line in 345kV combined transmission line, if the inserting resistance is considered before the operation of main circuit breaker.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.814-823
• /
• 2012

Electric power transmission utilities make an effort to maximize profit by reducing their electricity supply and operation costs while maintaining their reliability. The development of maintenance strategies for aged components is one of the more effective ways to achieve this goal. The reliability centered approach is a key method in providing optimal maintenance strategies. It considers the tradeoffs between the upfront maintenance costs and the potential costs incurred by reliability losses. This paper discusses the application of the Particle Swarm Optimization (PSO) technique used to find the optimal maintenance strategy for a transmission component in order to achieve the minimum total expected cost composed of Generation Cost (GC), Maintenance Cost (MC), Repair Cost (RC) and Outage Cost (OC). Three components of a transmission system are considered: overhead lines, underground cables and insulators are considered. In regards to aged and aging component, a component state model that uses a modified Markov chain is proposed. A simulation has been performed on an IEEE 9-bus system. The results from this simulation are quite encouraging, and then the proposed approach will be useful in practical maintenance scheduling.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.264_265
• /
• 2009

최근 국내에서 가스절연송전선(GIL : Gas Insulated Transmission Line)의 실계통 도입을 위하여 345kV급 GIL의 개발 및 적용을 위한 연구 및 검토가 수행되고 있다. 가공선로의 일부구간을 GIL로 대치하는 데 있어서, 변전소측이 원거리일 경우에는 변전소 내부의 차단기나 단로기 등 개폐 써지에 의한 과전압의 영향은 감쇄효과로 인하여 그다지 크지 않지만, 현재 설치 예정선로와 같이 변전소 측과의 거리가 약 2.6[km]로 짧을 경우 차단기 동작에 의한 개폐써지의 영향을 무시할 수 없게 된다. 따라서 본 논문에서는 GIL 시스템이 가공송전선로와 연계된 경우 근접한 변전소단에서 개폐를 가정하였을 때, GIL 시스템과 가공송전선로에서 발생할 수 있는 개폐과전압에 대하여 과도해석 프로그램인 EMTP를 이용하여 검토하였다.