• 한국전산유체공학회지
• /
• 제18권1호
• /
• pp.13-21
• /
• 2013

Cavitating flow is usually formed on the surface of a high speed underwater object. When a object moves near a free surface at very high speed, the cavity signature becomes one of the major factors to be overcome by sensors of military satellite. The present work was to study the free surface effect on the ventilated cavitation. The governing equations were Navier-Stokes equations based on a homogeneous mixture model. The multiphase flow solver used an implicit preconditioning method in the curvilinear coordinate system. The cavitation model used here was the one first presented by Merkle et al.(2006) and redeveloped by Park & Ha(2009). Computations considered the free surface effects were carried out with a NACA0012 hydrofoil and the corresponding results were compared with the experimental data to have a good agreement. Calculations were then performed considering the ventilated cavitation, including the effect of non-condensable gas under the free surface effects.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.579-583
• /
• 2006

건설 산업에서도 정보시스템 도입비용 및 위험부담을 줄이고, 이를 통해 부족한 경영능력과 미비한 경영환경을 상당부분 극복할 수 있으며, 기업의 자원과 비용을 최소화하고 업무처리 시간을 단축할 수 있을 것으로 기대되는 ASP(Application Service Provider) 시장의 활성화가 예상된다. 본 연구는 건설산업 ASP 시장을 위한 초기 탐색적 연구로써 건설기업에서 ASP 선택 시 의사결정에 영향을 미치는 평가영역을 도출하였고, 건설 ASP 평가기준을 제시하였으며, 제시된 평가기준을 바탕으로 ASP 우선 적용 건설업무기능을 도출하였다. 본 연구의 결과는 건설 산업 ASP에 대한 연구 기를 제공은 물론, 향후 건설산업에 ASP를 적용할 경우 우선적으로 적용해야 할 건설업무기능의 선택과 의사결정 방법에 도움을 줄 것으로 기대한다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권8호
• /
• pp.361-366
• /
• 2001

This thesis proposes a fuzzy logic cross coupled controller for a multi axis servo system. The overall control system consists of three elements: the axial position controller, the speed controller, and a fuzzy logic cross coupled controller. In conventional multi axis servo system, the motion of each axis is controlled independently without regard to the motion of other axes, in which the contour error, defined as the shortest distance between the desired and actual contours is compensated only by the position error of each axis. This decoupled control approach may result in degraded contouring performance due to such factors as mismatch of axial dynamics and axial loop gains. In practice, such systems contain many uncertainties, Therefore, the multi axis servo system must receive and evaluate the motion of all axes for a better contouring accuracy. Cross coupled controller utilizes all axis position error information simultaneously to produce accurate contours. However the existing cross coupled controllers cannot overcome friction, backlash and parameter variation. Also, since it is difficult to obtain an accurate mathematical model of multi axis system, here we investigate a fuzzy logic cross coupled controller method. Some simulations and experimental results are presented to illustrate the performance of the proposed controller.

• Journal of Microbiology and Biotechnology
• /
• 제25권1호
• /
• pp.119-126
• /
• 2015

Among the various human growth factors, epidermal growth factor (hEGF, consisting of 53 amino acids) has various effects on cell regeneration, stimulation of proliferation, migration of keratinocytes, formation of granulation tissues, and stimulation of fibroblast motility, which are important for wound healing. Owing to their multiple activities, EGFs are used as pharmaceutical and cosmetic agents. However, their low productivity, limited target specificity, and short half-life inhibit their application as therapeutic agents. To overcome these obstacles, we fused the collagen-binding domain (CBD) of Vibrio mimicus metalloprotease to EGF protein. About 18 or 12 amino acids (aa) (of the 33 total amino acids), which were essential for collagen-binding activity, were combined with the N- and C-termini of EGF. We constructed, expressed, and purified EGF (53 aa)-CBD (18 aa), EGF (53 aa)-CBD (12 aa), CBD (18 aa)-EGF (53 aa), and CBD (12 aa)-EGF (53 aa). These purified recombinant proteins increased the numbers of cells in treated specimens compared with non-treated specimens and control hEGF samples. The collagen-binding activities were also evaluated. Furthermore, CBD-hybridized hEGF induced phosphorylation of the EGF receptor. These results suggested that these fusion proteins could be applicable as small therapeutic agents in wound tissue healing.

• 지역연구
• /
• 제14권2호
• /
• pp.65-75
• /
• 1998

Education is widely recognized one of main sources for growth. This paper attempts to incorporate the general recognition into formal regional growth model. The model structure is largely neoclassical. It produces a single good with the two factors, educated labor and non-educated labor, via a constant return production migrating to the region with the higher real wage. The educated labor in a region is accumulated by two sources, migration and physical education capital, while the non-educated labor is by only migration. The paper shows that regional growth equilibrium is characterized as a saddle point. This indicates the presence of the minimum threshold size that must be overcome before a region may grow. It contrasts sharply with results obtained in regional growth models. The paper suggests that regional growth is determined less by the technical characteristics of regional production function characteristics of regional production function but by the stock combination of educated function but by the stock combination of education labor and non-educated labor. Based on this result, the impact of agglomeration economies on regional growth is explored. It is by phase diagram demonstrated that the presence of agglomeration economies do not always lead a region to growth since there still exists the minimum threshold even in the presence of agglomeration economies.

• 대한조선학회논문집
• /
• 제40권2호
• /
• pp.49-56
• /
• 2003

The welding deformation of a hull structure in the shipbuilding industry is Inevitable at each assembly stage. The geometric inaccuracy caused by the welding deformation tends to preclude the introduction of automation and mechanization and needs the additional man-hours for the adjusting work at the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurateprediction method which can explicitly account for the influence of various factors on the welding deformation. The validity of the prediction method must be also clarified through experiments. This paper is aimed at deriving the simple prediction model for fillet welding deformations. For this purpose, the thermal elasto-plastic analysis varying the welding conditions and plate thickness has been performed. On the basis of numerical results, the formulae for angular distortion and transverse shrinkage have been derived through the regression analysis. Experimental work has been also carried out to clarify the validity of numerical results. It has been found that the numerical results show a good agreement with those of experiments

• 농촌계획
• /
• 제24권3호
• /
• pp.127-135
• /
• 2018

In countries and regions population plays an important role. Recently the importance of population migration increased as population growth slowed. Researches on population migration are mainly focused on the analysis of the population movement factors and the regional structure analysis using the network analysis method. Analysis of regional structure through population movement is not enough to explain the phenomenon of migration of small cities and rural regions. In this study, to overcome the limit of previous studies the characteristics of the population movement rate according to the size of the population were analyzed. Also network analysis using the population movement OD (Origin and Destination) and population movement rate OD were conducted and the results of them were compared. As the results of analysis by the regional population scale, the population movement by population size showed a big difference in the areas with more than 100 thousand people and less than 100 thousand people. Migration to the outside of the province was the most frequent in regions with 30,000~50,000 people. The population migration rate network analysis result showed that the new area with large population inflow capacity was identified, which could not be found in the population movement network analysis because population movement number is small. The population movement rate irate is expected to be used to identify the central regions of the province and to analyze the difference in resident attractiveness.

• 시큐리티연구
• /
• 제32호
• /
• pp.177-204
• /
• 2012

본 연구는 민간조사 전문직업화의 실태를 분석하여, 이를 기초로 향후 민간조사업의 직업전문성을 제고하기 위한 방안을 모색해 보고자 하는데 그 목적이 있다. 이를 위해 이론적 논의와 선행연구를 바탕으로 전문직업화 과정을 밝히는 구조적인 접근방식의 전문직 특징인 전문협회, 전문지식, 교육과정, 자격제도, 윤리규정의 네 가지 요소를 중심으로 민간조사업의 전문직업화 실태를 분석하였다. 실태분석 결과를 바탕으로 민간조사업의 직업전문성을 제고하기 위해서는 법인화를 위한 관련 협회들 간의 적극적인 노력, 전문지식 편중성의 극복, 전문교과 과정의 편성 운영, 공인화된 자격제도로의 전환, 윤리강령의 제정 등이 요구된다고 할 수 있다.

• 한국식품위생안전성학회지
• /
• 제8권2호
• /
• pp.85-90
• /
• 1993

Fababea에 존재하는 vicine과 convicine은 고온의 열처리에서 안정하였으며, vicine 용액도 약산성(pH5)과 알카리성 pH(pH10)에서 열에 대한 안정성이 높게 나타났다. 반면 산성 pH에서 vicine은 산 가수분해되어 aglycone인 divicine을 형성하며, 생성된 divicine은 매우 불안정하여 쉽게 분해되었다. 효소(${\beta}-glucosodase$)에 의해 vicine을 가수분해시킨 후 생성된 divicine의 산화에 의한 분해 반응 동안(pH5, $80^{\circ}C$), half-life time과 rate constant는 각각 14.35분과 -0.018이었다. 따라서 fababean을 함유한 식품을 가공하는 동안 효소 (${\beta}-glucosidase$)를 처리하여 vicine과 convicine을 가수분해 시키면 이들의 양은 크게 감소될 것이다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제12권E호
• /
• pp.1-18
• /
• 1996

In this review, the significance of terrestrial ecosystems in the global sulfur budget has been reviewed based on the currently available databases covering the topic. In the section 1, we describe our current understanding of natural sulfur cycle in relation to most well-known natural reservoir, oceanic environment. The sections 2 and 3 provide the fundamental pictures of the rerrestrial sulfur cycle with respect to the relative importance of its individe the fundamental pictures of the terrestrial sulfur cycle with respect to the section 3, previously reported flux values for several major sulfur gases are presented for each reservoir and are intercompared to derive representative fluxes for the respective environment. In the section 4, source mechanisms for volatile sulfur species are dealt for both microscale and macroscale processes leading to their productions. In the section 5, environmental factors controlling the exchange of biogenic sulfur gases across the air-surface have been discussed. In the section 6, environmental fate of sulfur gases released into the atmosphere has been described. Finally in tie section 7, as concluding remarksm we discuss directions and suggestions to overcome various limitations encountered from previous measurement investigations of natural sulfur cycle in diverse natural ecological systems.