• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.150-160
• /
• 1999

This paper presents a new register transfer level synthesis method to overcome the disadvantages of the previous register transfer level synthesis systems. The previous register transfer level synthesis systems first translate from a hardware description language to sequential circuits inadequately. Secondly, the systems separate registers and combinational circuits and then optimize only combinational circuits. This paper describes their disadvantages and then proposes a new method to overcome their shortcomings. This paper also shows the effectiveness of the proposed method by using the proposed method at designing the controller of a surveillance system and the 8-bit signed multiplier.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.4
• /
• pp.351-355
• /
• 2016

Welding machines are high-capacity systems used in a low-frequency range using IGBT. As their system is similar to a large transformer, most welding machines suffer a great loss because of hard switching and vast leakage inductance. A voltage-balancing circuit is designed to overcome these shortcomings. This circuit can reduce the transformer size by making it into a high frequency and reducing the input voltage by half and by adopting a serial structure that connects two full-bridges in a series to use a MOSFET with a good property at high frequency. In addition, a Schottky diode is used in the primary rectifier to overcome the low efficiency of most welding machines. To use the Schottky diode with a reliably relatively low withstanding voltage, an active snubber is adopted to effectively limit the ringing voltage of the diode cut-off voltage.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.462-465
• /
• 2001

The wound induction motor can provide high starting torque and reduced starting current simultaneously by inserting large scale resistor. And this technique is one of the well known methods among the induction motor starting methods and generally used for heavy load starting such as Crain and Cement factories. The conventional PI controller has been widely used in industrial application due to the simple control algorithm and in general, PI controller is used for control of current, torque, position, and speed for the wound induction motor drive system. However, the system may result in poor performance since sensors have to be used, which in turn is limited by the environmental condition. Recently, to overcome these problems, many sensorless vector control methods for the wound induction motor have been studied. This paper presents MRAS method with on-line stator resistance tuning for sensorless vector control of the wound induction motor drive. In conventional MRAS method, in low frequency, stator resistance variation can result in poor performance. Therefore, to overcome several shortages of the conventional MRAS caused by parameter variation and enhance robustness of the sensor less vector control, this paper investigates a MRAS method with on-line stator resistance tuning for sensorless vector control of the wound induction motor. The validity and effectiveness of the proposed method is verified through digital simulation.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.306-315
• /
• 2004

A Bridge Transported Servo Manipulator (BTSM) for Advanced spent fuel Conditioning Process (ACP) has been developed to overcome the limitation of access that is a drawback of Mechanical master-slave manipulators (MSMs) for the equipment maintenance. Wire-driven mechanisms have been adopted to increase the handling capacity to weight. The main disadvantage of the wire driven mechanism is that if one link is in motion, other links can be affected because wires and links are coupled. In this paper, the relationship between pulleys and links are formiliarized to overcome this drawbacks, Derived equations are proven and analyzed through experiments.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.765-769
• /
• 2011

The existing portable reference equipment for ITS systems performance evaluation has several limitations. First, it is difficult to set up and operate the equipment in the road section with the shoulder width equal to or smaller than 1.5m. Secondly, the crash with a car could lead to severe accident since it is big and heavy. Lastly, it cannot collect data from multiple lanes at a time. In this research the characteristics of the USN-based portable reference equipment developed to overcome shortcomings of the existing portable reference equipment were analyzed qualitatively and its performance level was evaluated through the field test. Consequently, the USN-based portable reference equipment turned out to overcome the operational shortcomings and satisfy the performance level required for the portable reference equipment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.6
• /
• pp.545-551
• /
• 2009

A small guard robot working indoors or outdoors can be used to report various information on its environment to an operator. The guard robot should be small-sized and lightweight to increase its portability. In addition, it should be able to overcome a relatively high obstacle to cope with various situations. To satisfy these requirements, this paper presents a small robot equipped with a novel hybrid wheel and track mechanism that can select wheels or tracks depending on the situation. The robot folds the tracks into the body in the wheel mode and only wheels are active with the tracks immobilized, which results in the fast moving speed. In the track mode, the tracks are extended to keep in contact with the ground. Furthermore, this research proposes the belt length maintenance mechanism by which the belt length is kept constant in either the wheel or track mode. Various experiments demonstrate that the proposed robot can move fast by using wheels on the smooth terrain and overcome obstacles by using tracks on the rough terrain.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.3
• /
• pp.341-357
• /
• 2010

Forward Error Correction (FEC) techniques have been adopted to overcome packet losses and to improve the quality of video delivery. The efficiency of the FEC has been significantly compromised, however, due to the characteristics of the wireless channel such as burst packet loss, channel fluctuation and lack of Quality of Service (QoS) support. We propose herein an Adaptive Cross-layer FEC mechanism (ACFEC) to enhance the quality of video streaming over 802.11 WLANs. Under the conventional approaches, FEC functions are implemented on the application layer, and required feedback information to calculate redundancy rates. Our proposed ACFEC mechanism, however, leverages the functionalities of different network layers. The Automatic Repeat reQuest (ARQ) function on the Media Access Control (MAC) layer can detect packet losses. Through cooperation with the User Datagram Protocol (UDP), the redundancy rates are adaptively controlled based on the packet loss information. The experiment results demonstrate that the ACFEC mechanism is able to adaptively adjust and control the redundancy rates and, thereby, to overcome both of temporary and persistent channel fluctuations. Consequently, the proposed mechanism, under various network conditions, performs better in recovery than the conventional methods, while generating a much less volume of redundant traffic.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.613-631
• /
• 2013

Cognitive radio (CR) is proposed as a key solution to improve spectral efficiency and overcome the spectrum scarcity. Spectrum sensing is an important task in each CR system with the aim of identifying the spectrum holes and using them for secondary user's (SU) communications. Several conventional methods for spectrum sensing have been proposed such as energy detection, matched filter detection, etc. However, the main limitation of these classical methods is that the CR network is not able to communicate with its own base station during the spectrum sensing period and thus a fraction of the available primary frame cannot be exploited for data transmission. The other limitation in conventional methods is that the SU data frames should be synchronized with the primary network data frames. To overcome the above limitations, here, we propose a spectrum sensing technique based on blind source separation (BSS) that does not need time synchronization between the primary network and the CR. Moreover, by using the proposed technique, the SU can maintain its transmission with the base station even during spectrum sensing and thus higher rates are achieved by the CR network. Simulation results indicate that the proposed method outperforms the accuracy of conventional BSS-based spectrum sensing techniques.

• Plant Biotechnology Reports
• /
• v.4 no.2
• /
• pp.129-138
• /
• 2010

An efficient transformation system for high-throughput functional genomic studies of kiwifruit has been developed to overcome the problem of necrosis in Actinidia arguta explants. The system uses Agrobacterium tumefaciens strain EHA105 harbouring the binary vector pART27-10 to inoculate leaf strips. The vector contains neomycin phosphotransferase (nptII) and ${\beta}$-glucuronidase (GUS) (uidA) genes. A range of light intensities and different strengths of Murashige and Skoog (MS) basal salt media was used to overcome the problem of browning and/or necrosis of explants and calli. Callus browning was significantly reduced, resulting in regenerated adventitious shoots when the MS basal salt concentration in the culture medium was reduced to half-strength at low light intensity ($3.4\;{\mu}mol\;m^{-2}\;s^{-1}$) conditions. Inoculated leaf strips produced putative transformed shoots of Actinidia arguta on half-MS basal salt medium supplemented with 3.0 $mg\;l^{-1}$ zeatin, 0.5 $mg\;l^{-1}$ 6-benzyladenine, 0.05 $mg\;l^{-1}$ naphthalene acetic acid, 150 $mg\;l^{-1}$ kanamycin and 300 $mg\;l^{-1}$ $Timentin^{(R)}$. All regenerated plantlets were deemed putativ transgenic by histochemical GUS assay and polymerase chain-reaction analysis.

• Journal of the Korean Society for Library and Information Science
• /
• v.40 no.1
• /
• pp.59-75
• /
• 2006

In information society, enhancing information literacy is a common goal of the academic and school libraries. Consequently the academic libraries connect with the school libraries through information literacy In this study, a academic library visiting program is presented and proposed as a policy to link the academic and school libraries. This program may be a alternative to activate school library-based teaming and overcome lacks of resources and teacher librarians, in the academic libraries. it may be a policy to improve lacks of materials and carrels and overcome the problem of service increase in the opening academic library for local communities. And it will contributes to the educational role or the librarian.