• Ocean and Polar Research
• /
• v.42 no.2
• /
• pp.171-178
• /
• 2020

R/V EARDO, commissioned in 1992, has successfully carried out ocean research campaigns in Korean jurisdictional and adjacent waters, including continental margins and coastal zones within the Korean Exclusive Economic Zone (EEZ), for 29 years. However, it will soon be reaching the end of its useful service life. A replacement for R/V EARDO is urgently needed to ensure the safety of vessel itself and its crews, and efficient ship operation and maintenance, as well as to meet modern scientific mission requirements (SMRs). Basic specifications for a replacement ship have been devised and reviewed over the past nine months. A test of the proposed hull form was also performed. The total tonnage of the proposed vessel is approximately 740 tons, and the overall length and width are 62.0 and 11.6 m, respectively. The new ship will thus be 73% larger than the current R/V EARDO; in particular, the research workspace will be 4.4 times larger. The major design priorities are the propulsion system, efficiency of radiated noise and vibration control, and the dynamic positioning system. An environmentally friendly emission system, meeting International Maritime Organization (IMO) Tier III regulations, will be installed in the third exhaust pipe. Various wet and dry lab spaces as well as 32 different scientific instruments have also been considered in the ship design.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.448-452
• /
• 2010

The traditional Aids to Navigations(AtoN) have been ensuring the safety of ships by indicating the passage and dangers by depending on the flashing lights. But the more the industrial complex behind port which is all over the country involving the Ulsan port developed, the more the lights behind port is stronger, and then the distinguishment of the signal of AtoN from the lights behind port is more difficult. And It is urgently needed to prepare the counterplan about the ensurement of safety because the authorities levels up the limit tonnage of the ships which are sail in and out during night to improve the operation of port through reducing of the traffic jam So, the method of direct lighting like LED non-neon is applied to unmanned lighthouses or light beacon, and the LED flashing number plate is applied to light buoys whose light power is weaker than to improve distinguishment and to be easy positioning of ships. As a result, the users of Ulsan port comment favorably on this item and the development of AtoN must be continuos to overcome the lights behind port.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.4
• /
• pp.495-501
• /
• 2014

In order to propose basic references for the policy making of fishing vessel fishery by Jeju Special Self-Governing Province, we have obtained the basic productivity through analyzing operating days and catches of 16 sample fishing vessels registered in Aewol port, the north of Jeju island in the year of 2011. In addition, to compare with the basic productivity of southern sea area in the Jeju island, that of 7 sample fishing vessels registered in Kangjung port was used. Around Aewol port, average operating days during the main catch period from July to October were over 15 days a month. A average daily catch of fishing vessels was minimum 21.0 kg in May and reached to maximum 54.5 kg in December, showing U-shaped catch pattern through the year. The trend formula of the average daily productivity (y) depending on a tonnage (x) of fishing vessels around Aewol port was described by the equation, y = 18.867 ln(x) + 11.001, and that around Kangjung port in the year of 2009 was understood to be y = 23.271 ln(x) + 25.715. As a result, it seemed that the productivity of fishing vessels around Kangjung port, operating in the southern sea area of Jeju Island, was much greater than that of fishing vessels around Aewol port in the northern sea area of Jeju Island. Especially, that of fishing vessels less than 10 tons was 35-40% more.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.103-109
• /
• 2004

The term ton is widely used as the unit of the ship's size nowadays. Before people accepted the term ton as the unit of the ship's size, the various terms had been used for indicating the ship's size. For examples, the term ton was used in Western Europe, last in Northern Europe, cantara in Geneva, milliaria in Venice, and carra in Naple. In Asia the rice had been the most important cargo for many centuries. So the term SEOK in Korean or SHI in Chinese was used as the unit of the ship's size. Especially the Chinese used the term LIAO or RYO in Korean for indicating the ship's size. As above seen, the different terms had been used for showing the ship's size from places to places. But with the introduction of Moorsom's Tonnage Measurement in the 19th century and its spread to all over the world, the term ton was become the only unit of ship's size.

• Journal of Navigation and Port Research
• /
• v.28 no.5
• /
• pp.339-345
• /
• 2004

The term ton is widely used as the unit of the ship's size. Before people used the term ton as the unit of the ship's size, the various terms had been used for indicating the ship's size. For examples, the term ton was used in Western Europe, last in Northern Europe, cantara in Geneva, milliaria in Venice, and carra in Naple respectively. In Asia the rice had been the most important cargo for many centuries. So the term SEOK in Korean or SHI in Chinese was used as the unit of the ship's size. Especially the Chinese used the term LIAO in Chinese or RYO in Korean for indicating the ship's size. As above seen, the different terms had been used for showing the ship's size from places to places. But with the introduction of Moorsom's Tonnage Measurement in the middle of the 19th century and its spread to all over the world, the term ton was become the only unit of ship's size.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.2
• /
• pp.116-125
• /
• 2013

Jigging and angling fishery is prevalent in the East Sea of Korea and this fishery needs many lamps to attract the fish. And the fishing boat uses 24~47 ballasts by the vessel's tonnage to turn on the fishing lamp. A 3.5kW magnetic-type ballast being currently used at many fishing boats can drive two 1.5kW metal-halide lamps. Meanwhile, this ballast has large weight (25kg) and volume. Therefore it is one of reason for the over-consumption of energy and the fire, resulted from overheat and electrical short, occurs occasionally because the ballast is installed at narrow and hot engine room. In addition, most of magnetic ballast has several problems such as periodic condenser replacement, low energy efficiency and making lamp short life, etc. So it is necessary to improve or develop newly the electronic ballast, which has to be smaller, lighter and more efficient. An electronic ballast was designed for the fishing boat by considering duration and electromagnetic interference in the study. Its weight and volume are respectably 40% and 66% compared to current ballast on the basis of PCB. The metal-halide lamp's spectrum of the designed ballast was nearly same to that of the current ballast in the test of lighting. In particular, the light stability was improved and there isn't any radio interference. As mentioned above, it is expected that the developed electronic ballast can replace current magnetic ballast because of many advantages related to energy-saving.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.153-160
• /
• 2017

It may be reasonable to consider density per unit area over time rather than analyze traffic volume, which is simply the traffic volume per unit of time, in assessing the maritime traffic congestion of a certain area. This study contributes to the standardization of maritime traffic congestion assessment methods for the maritime traffic safety diagnosis institute while seeking a new method to minimize evaluation error due to converted traffic volume per ship tonnage level. To solve this problem, a method to evaluate maritime traffic congestion by comparing the area occupied by a vessel with the area of its route using vessel identification data from the Automatic Identification System (AIS) has been proposed. In this new model, it is possible to use actual data due to the development of information and communication technology, reducing conversion error while allowing for the evaluation of maritime traffic congestion by route.

• Economic and Environmental Geology
• /
• v.29 no.6
• /
• pp.665-676
• /
• 1996

Domestic metal mines have contributed to the national industrialization of Japan for over a century through their stable supply of raw materials. However, due to the changes which have taken place in the industries structure, mining industry has been shifted to downstream industries. At present, only three major mines are in production. In recent times, changing economic conditions have made it increasingly difficult to develop new base metal mines. Subsequently, the deposit type targeted has shifted from base metals to epithermal associated gold deposits which, if of sufficient grade and tonnage, can be economical. Accompanying the dramatic rise in the price of gold during the late 1970's, has been an increase in the geological information and our understanding of epithermal gold deposits around the Pacific rim region. In particular, the common acceptance of the plate tectonic theory and the correlation's between modem geothermal systems and fossil epithermal systems were most important developments. In 1988, the Mining Council authorized the domestic exploration of 19 districts, targeting epithermal gold mineralization. Since 1989 the Metal Mining Agency of Japan, semi-government organization, has been conducted gold exploration in such area. With new genetic concepts and new technologies, promising gold mineralization has been discovered. Two such areas which are at an advanced stage of exploration are Seta, in northern Hokkaido, and Noya, in central Kyushu.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.829-833
• /
• 2017

Recently, pirate incidents involving passing ships have been continuously occurring in the seas southwest of the Philippines, the Sulu Sea and the Celebes Sea. Pirates in these areas are members of the "Abu Sayyaf Group", which consists of Islamic armed rebels. They have abducted and confined 59 ship crews over the last 13 months to obtain money for group operations. The activities of these pirates, abducting and killing crews, have became a significant threat for marine security in the Sulu and Celebes Seas and for logistic activities in Asia. This study examines and analyzes 22 recent incidents in terms of ships gross tonnage, kind, nationality, incident time, location, etc. The identity of the Abu Sayyaf Group, which has been committing this piracy and represents the de facto power behind the actors responsible, is also unpacked, along with current challenges to resolving these conflicts. Finally, responses passing ships, shipping companies, related countries and the international community should make are proposed.

• Journal of Fisheries and Marine Sciences Education
• /
• v.4 no.2
• /
• pp.109-120
• /
• 1992

The auther reported the distribution of fisheries high schools and arrangement of curriculum in Japan in the forward report, and describes on the outer apparance and substantiality of education of fisheries high schools in Japan in the present report. 1. The rate of population to the number of fisheries high school shows 2,350 thousands in Japan, compared with 3,250 thousands in Korea. Then the rate in Korea is 1.4 times as high as that in Japan. 2. The rate of pupil to the whole regular instructors for fundamental subjects and for vocational subjects in the fisheries high schools, and also the rate to the instructors for vocational subjects show 10.4 and 16.3 in Japan, compared with 18.2 and 30.2 in Korea. Then the rate in Korea is 1.8 times as high as that in Japan. In addition to the instructors for vocational subjects. trainer and assistants for technical training-are employed in Japan compared with no such instructors or assistants in Korea. Then the rate of pupil to the whole instructing staffs in Korea is 2.4 times as high as that in Japan. 3. 81 percents of training ships in Japan are larger than 400 gross tons, which is extremely higher to that in Korea. The rate of gross tonnage of the ships to the number of trainees shows 6.2 tons in Japan compared with 1.1 tons in Korea. Also such large dimensioned training ships are newly built every other 12 years. the construction cost per 1 gross ton of such ships are said as 2.5 to 3 million yen, which corresponds to 15 to 18 million wons, and is over 3 times as much as that in Korea. 4. The basic education on the marine field is widely diffused in Japan. For an example, swimming pools are prepared not only in fisheries high schools but also in primary schools although it is rate even in fisheries high schools or colleges in Korea. 5. Almost all provinces which locate on the seashore have at least one fisheries high school and the curriculum is arranged to match the needs of local districts, then the management of school is tightly linked to the local government. 6. Entrance system is also flexible and recommended entrance system for successors of fishermen is settled. 7. Re-education of instructors for the new subjects which should be prepared to match the demands of ages are supported by local government in the aspect of time and budget. 8. The special two-year course for advanced seamen' s education is attached to some fisheries high schools and the graduates are qualified to get the third grade marine officer's or engineer's liscence.