• 대한전기학회논문지
• /
• 제32권1호
• /
• pp.7-12
• /
• 1983

When emergency lighting using a D.C. source is needed, we select the fluorescent lamp that has higher efficiency than that of an incandescene lamp. This paper deals with a series inverter for a fluorescent lamp load, which has high frequency output characteristics. First, the appropriate operating frequency is determined and second, the optimum value of circuit elements is determined in consideration of several important conditions. The results obtained by experimentations are represented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.96-100
• /
• 1990

Dynamic modelling and controller design technique for constant-frequency series resonant converter with buck type preregulator are mainly described in this paper. An equivalent circuit model is derived and a state equation is developed from this model. To improve the dynamic performance, a negative feedback of inductor current is added to the proportional and integral control of output voltage. Furthermore, an optimization technique with prescribed eigenvalue region is applied to the determination of feedback gains. With the presented design method, much better dynamic performance can be obtained.

• 대한전자공학회논문지
• /
• 제25권3호
• /
• pp.315-321
• /
• 1988

The input-output relation for nonlinear systems can e explicitly represented by the volterra functional series and it is characterized by the Volterra kernels. A block diagram reduction method is proposed to determine the Volterra kernels for nonlinear differential equations and is compared with the direct substitution techniques. The former method can significantly reduce the computational complexity. A degree of nonlinearity is defined and analyzed for the analysis of nonlinear systems.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1993년도 제3회 정기총회 및 추계학술발표회
• /
• pp.2-2
• /
• 1993

Inference for discrete event simulations usually relies on either independent replications or, if each simulation run is expensive, the method of batch means applied to a single replications. We present a new method, threshold bootstrap, which equals or exceeds the performance of independent replications or batch means. The method works by resampling runs of data created when a stationary time series crosses a threshold level, such as the sample mean of series. Computational results show that the threshold bootstrap matches or exceeds the performance of these alternative methods in estimating the standard deviation of the sample mean and producing valid confidence intervals.

• 물과 미래
• /
• 제24권3호
• /
• pp.61-70
• /
• 1991

본 연구는 이산형 선형 대체함수(discrete linear transfer function)를 이용하여 수문시스템의 입력과 출력으로 나타낼 수 있는 강우와 유출의 관계를 통계학적으로 분석하고 모형화 하는 것이다. 모형의 설정 및 특정(identification), 추정(estimation) 및 검토(diagnostic checking) 과정이 제시되었으며 모형에 대한 적합성은 시계열 분석에서 이용되고 있는 통계량으로 판정하였다.

• Journal of the Korean Data and Information Science Society
• /
• 제17권3호
• /
• pp.821-830
• /
• 2006

This paper develops support vector based fuzzy linear and nonlinear regression models and applies it to forecasting the exchange rate. We use the result of Tanaka(1982, 1987) for crisp input and output. The model makes it possible to forecast the best and worst possible situation based on fewer than 50 observations. We show that the developed model is good through real data.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2003년도 춘계학술발표논문집
• /
• pp.271-274
• /
• 2003

본 논문에서는 통신 기지국용 전원으로 사용할 수 있는 주파수 제어 직렬 공진형 컨버터의 동작 원리 및 특성을 살펴보고 실제의 전원 시스템을 설계 및 제작하려고 한다. 주파수 제어 공진형 컨버터 시스템은 POSR(Parallel Output Series Resonant) 형태이기 때문에 부하에 강인하고 주파수를 제어함으로써 입력전압의 변화에도 안정된 출력을 보여준다. 실제 시스템 제작에 앞서 먼저 시뮬레이션을 통한 시스템의 분석을 하였고 시뮬레이션 프로그램은 ACSL(Advanced Continuous Simulation Language)을 사용하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.255-258
• /
• 2001

This paper proposes a new structure of a fiber-optic illuminator using high Lux RGB LEDs. A simulation program, LightTools, is used for the verification of the model. An LED mounting holder containing 74 RGB LEDs is used as a basic part of its light collector. Since the light output level of current LED lamps is still far below that of conventional lamps, it is required to double the right output in order to replace a conventional illuminator with a halogen lamp. An additional cone-type reflector is installed hemispherically and the resulting structure comprises a basic collector unit. To further increase the output two collector units are connected together in series. As the result, the light output increases nearly 70% with compared to a collector with a basic structure. The system efficiency can be increased more than 8 times with compared to conventional one.

• 조명전기설비학회논문지
• /
• 제26권12호
• /
• pp.80-86
• /
• 2012

The high-voltage pulse generator is consist of transformers of fundamental wave and harmonic waves, and shunt capacitances. The pulse has the fundamental wave and the harmonic waves that have been increased as a series circuit by the transformers to make high voltage pulse. This paper shows the high-voltage pulse generator simulation using a circuit program with experiment data. In the equivalent circuit, magnetized inductances and loss resistances which affect output voltage, have been obtained. The output capacitor circuits have characteristics of band pass. The output voltages of the pulse width 50% and 25%(PWM) were obtained. The output of the high-voltage pulse generator is 2.5kHz, 1.8kV.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.144-147
• /
• 1988

The current-fed DC-DC converter, which is known as the most stable DC-DC converter, has a two-winding reactor in series with the input. In this paper the new multi-output DC-DC converter circuit, in which the 2nd winding of the reactor is creating the 2nd output, while the 2nd winding is feeding the energy to input in the current-fed converter, is proposed. The steady state characteristics of the new circuit are clarified. And it is found that the maximum value exists in the 2nd output.