• 한국산학기술학회논문지
• /
• 제22권2호
• /
• pp.267-272
• /
• 2021

본 연구는 최근 증가하고 있는 건축물의 다양한 외벽 형상에 따라 적용이 가능한 비정형 건축물에의 적용을 위해 3D 프린팅 기법을 적용한 외장재의 제조를 위한 기초 연구로서 진행하였다. 3D 프린팅 외장재의 출력성과 적층성의 확보를 위하여 3D 프린팅 콘크리트를 몰드에 타설한 시험체와 급결제를 사용한 출력물 시험체의 단위중량과 강도특성을 분석하였다. 몰드에 타설한 콘크리트의 단위중량에 비하여 급결제를 사용한 3D 프린팅 콘크리트의 단위중량이 3.5%~5.0% 정도 감소하는 경향을 나타내었고, 압축강도는 몰드에 타설한 콘크리트의 압축강도에 비하여 3D 프린팅을 통한 출력물의 압축강도는 36%~46%정도 감소하는 경향을 나타냈다. 휨강도의 경우 몰드에 타설한 콘크리트의 압축강도에 비하여 3D 프린팅을 통한 출력물의 압축강도는 36%~46%정도 감소하는 경향을 나타냈다. 급결제를 사용한 3D 프린팅 콘크리트의 강도 특성에 관한 영향은 2.0~5.8%정도 감소하는 경향을 나타냈다. 따라서, 3D 프린팅 출력시 급결제의 사용에 따른 강도 특성에 영향은 출력에 의한 강도 특성의 감소 보다 적은 것으로 나타나 3D 프린팅 외장재 제조시 급결제의 사용이 가능한 것으로 판단된다.

• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.324-330
• /
• 2012

In this paper, we presents a robust control system design for compensating hysteresis of a piezoelectric actuator-based actuation unit. First, the dynamics between the input voltage and the output displacement of the actuation unit are unravelled via a non-parametric system identification method. From the dynamic characteristics of those experimental transfer functions, a parametric model is then derived, whose dynamics match those of the non-parametric ones under various conditions on input voltages. A robust controller is constructed on the basis of this parametric model in order not only to effectively compensate the hysteresis of the actuation unit but also to guarantee the robust stability. Extensive experiments show that the proposed robust control system successfully mitigate the effect of the hysteresis and improve the tracking capability of the actuation unit.

• 전자공학회논문지B
• /
• 제31B권3호
• /
• pp.60-68
• /
• 1994

In this paper, the multiplicative algorithm of two polynomials over finite field GF(($p^{m}$) is presented. Using the presented algorithm, the multiple-valued multiplier of the serial input-output modular structure by CCD is constructed. This multiple-valued multiplier on CCD is consisted of three operation units: the multiplicative operation unit, the modular operation unit, and the primitive irreducible polynomial operation unit. The multiplicative operation unit and the primitive irreducible operation unit are composed of the overflow gate, the inhibit gate and mod(p) adder on CCD. The modular operation unit is constructed by two mod(p) adders which are composed of the addition gate, overflow gate and the inhibit gate on CCD. The multiple-valued multiplier on CCD presented here, is simple and regular for wire routing and possesses the property of modularity. Also. it is expansible for the multiplication of two elements on finite field increasing the degree mand suitable for VLSI implementation.

• 한국전자통신학회논문지
• /
• 제7권1호
• /
• pp.135-139
• /
• 2012

LTE (long-term evolution) 를 비롯한 4G 이동통신 기지국 시스템에 있어서 최근에 DU(digital unit)와 RU(radio unit) 로 분리된 형상의 기지국들이 많이 등장하고 있다. 이러한 형태의 기지국에서 DU 는 전화국사에 설치하고 RU 는 옥외에 설치하는 형태로서, DU와 RU 간의 분리 가능한 거리는 이동통신 망 설계를 하는데 있어서 매우 중요한 요소가 된다. 하지만, DU와 RU 간 허용거리는 이동통신의 물리계층 기술에 의해 제약을 받을 수 있다. 본 논문에서는 FDD (frequency division duplexing) 기반의 4G 이동통신 시스템에서 Closed-Loop MIMO (multiple input multiple output) 기술에 의해 제한되는 DU와 RU 간 한계거리에 대해 분석하였다. DU와 RU 간 한계거리는 이동통신 시스템의 동작 주파수에 따라 다른 결과를 나타내며, 2 GHz의 동작주파수를 가정할 경우에는 약 11 km의 한계거리를 가지는 것으로 분석되었다.

• 한국항해항만학회지
• /
• 제26권2호
• /
• pp.215-220
• /
• 2002

본 논문에서는 DTV 중계기용 Temperature Independent Biasing을 이용한 100 watt급 단위 전력증폭기를 설계한 후, 제작하였다. $20^{\circ}C$에서 $100^{\circ}C$까지의 온도변화에 대하여 단위 전력증폭기의 DC 동작점은 능동 바이어스에 의해서 고정되며, 증폭기의 소모전류의 변화량이 0.6A 이하의 우수한 특성을 얻었다. 제작된 단위 전력증폭기는 12dB 이상의 이득, $\pm$0.5dB 이하의 이득 평탄도, DTV 중계 주파수범위(470-806 MHz)에 걸쳐 15dB 이하의 입.출력 반사손실을 나타내었다. 100 Watt 단위 전력증폭기는 출력 전력이 100 watt일 때 2MHz의 오프셋에서 32dBc 이상의 상호 변조 왜곡(IMD)을 나타내었다.

• The Journal of Korean Physical Therapy
• /
• 제23권3호
• /
• pp.37-42
• /
• 2011

Purpose: The principal objective of this study was to evaluate the power output of ultrasound in Korean clinics and compare the value with Korean and global standards. Methods: A total of 69 units were measured for ultrasound power output. The normal range of power output level was ${\pm}30%$ of the output set according to KFDA standards. Device model, manufacturer, ERA, and BNR were obtained via simple questionnaires. A portable ultrasound power meter was used for output measurement. Results: 37 machines, with reported ERA values, were assessed for power output per unit area. Of these machines, 13 (37.14%) were considered to be compliant with US FDA standards at 0.5, 1.0, 1.5, $20W/cm^2$ and 18 (51.43%) were considered within KFDA standards. The remainder of the machines were outside the standard error and evidenced irregular output levels, even though most of them were the same model. Conclusion: Appropriate ultrasound intensity is incredibly important for safety and effective use. Therefore, the KFDA standards regarding ultrasound may require revision in light of global standards, including BNR and ERA additionally, attention should be paid to regular calibration for safe use in clinical practice.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.92-94
• /
• 2003

In superconductive digital logic circuits, D2 cells can be used to compose a decoder an important component of an Arithmetic Logic Unit (ALU). In this wor, we simulated D2 cell by using WRspice. D2 cell has one input, one switch input, and two outputs (output1 and output2). D2 cell functions in such way that output1 follows the input and output2 is the complement of the input data, when the switch input is "0, ". However, when there is a switch input "1, " the opposite output signals are generated. In this paper, we optimized a D2 cell by using WRspice, and obtained the minimum margin of 26%. Our optimized D2 cell will play a key role in the ALU fabrication.the ALU fabrication.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.123-126
• /
• 2003

RSFQ (Rapid Single Flux Quantum) circuits are used in many practical applications. RSFQ DFFC (Delay Flip-Flop with complementary outputs) circuits can be used in a RAM, an ALU (Arithmetic Logic Unit), a microprocessor, and many communication devices. A DFFC circuit has one input, one switch input, and two outputs (output l and output 2). DFFC circuit functions in such way that output 1 follows the input and output 2 is the complement of the input when the switch input is "0." However, when there is a switch input "1."the opposite output signals are generated. In this work, we have designed an RSFQ DFFC circuit based on 1 ㎄/$\textrm{cm}^2$ niobium trilayer technology. As circuit design tools, we used Xic, WRspice, and Lmeter After circuit optimization, we could obtain the bias current margins of the DFFC circuit to be above 32％.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 1997년도 한국전자거래학회 종합학술대회지
• /
• pp.263-268
• /
• 1997

Functional Modeling methodology, IDEF0 is widely used for modeling, analysis and description of enterprise system. The limitation of modeling components restricts applicability and give rise to confusion about model. In this paper, we propose new method to extend IDEF0. The first is adding modeling components which are semantic representations. In addition to ICOMs, we add the time and cost component which is required to execute the function. The second is tracing mechanism. When we need some information, we drive the functions related with the information by reverse tracing of the function which produces the information as a output and input. Through the tracing, we find out the bottleneck process or high cost process. Finally, we suggest the final decomposition level. We call the final decomposed function into unit function which has only one output data. We can combine and reconstruct some of functions because an unit function is similar to ‘lego block’. To reach the integrated system, the main problem to be solved is the integration of information produced by different functional subsystem. This can be resolved when the creation of data must be dependent on only one function. Through view integration of function output, we can guarantee the integrity of data.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권3호
• /
• pp.273-284
• /
• 2020

The performance of Global Navigation Satellite System (GNSS) chipset and Inertial Measurement Unit (IMU) sensors embedded in smartphones for location-based services (LBS) is limited due to the economic reasons for their mass production. Therefore, it is necessary to efficiently process the output data of the smartphone's embedded sensors in order to derive the optimum navigation values and, as a previous step, output performance of smartphone embedded sensors needs to be verified. This paper analyzes the navigation performance of such devices by processing the raw measurements data output from smartphones. For this, up-to-dated versions of smartphones provided by Samsung (Galaxy s10e) and Xiaomi (Mi 8) are used in the test experiment to compare their performances and characteristics. The GNSS and IMU data are extracted and saved by using an open market application software (Geo++ RINEX Logger & Mobile MATLAB), and then analyzed in post-processing manner. For GNSS chipset, data is extracted from static environments and verified the position, Carrier-to-Noise (C/N₀), Radio Frequency Interference (RFI) performance. For IMU sensor, the validity of navigation and various location-based-services is predicted by extracting, storing and analyzing data in static and dynamic environments.