• 제목/요약/키워드: Output prediction algorithm

검색결과 155건 처리시간 0.025초

음성신호로 인한 잡음전달경로의 오조정을 감소시킨 적응잡음제거 알고리듬 (Adaptive noise cancellation algorithm reducing path misadjustment due to speech signal)

  • 박장식;김형순;김재호;손경식
    • 한국통신학회논문지
    • /
    • 제21권5호
    • /
    • pp.1172-1179
    • /
    • 1996
  • General adaptive noise canceller(ANC) suffers from the misadjustment of adaptive filter weights, because of the gradient-estimate noise at steady state. In this paper, an adaptive noise cancellation algorithm with speech detector which is distinguishing speech from silence and adaptation-transient region is proposed. The speech detector uses property of adaptive prediction-error filter which can filter the highly correlated speech. To detect speech region, estimation error which is the output of the adaptive filter is applied to the adaptive prediction-error filter. When speech signal apears at the input of the adaptive prediction-error filter. The ratio of input and output energy of adaptive prediction-error filter becomes relatively lower. The ratio becomes large when the white noise appears at the input. So the region of speech is detected by the ratio. Sign algorithm is applied at speech region to prevent the weights from perturbing by output speech of ANC. As results of computer simulation, the proposed algorithm improves segmental SNR and SNR up to about 4 dBand 11 dB, respectively.

  • PDF

Blind MMSE Equalization of FIR/IIR Channels Using Oversampling and Multichannel Linear Prediction

  • Chen, Fangjiong;Kwong, Sam;Kok, Chi-Wah
    • ETRI Journal
    • /
    • 제31권2호
    • /
    • pp.162-172
    • /
    • 2009
  • A linear-prediction-based blind equalization algorithm for single-input single-output (SISO) finite impulse response/infinite impulse response (FIR/IIR) channels is proposed. The new algorithm is based on second-order statistics, and it does not require channel order estimation. By oversampling the channel output, the SISO channel model is converted to a special single-input multiple-output (SIMO) model. Two forward linear predictors with consecutive prediction delays are applied to the subchannel outputs of the SIMO model. It is demonstrated that the partial parameters of the SIMO model can be estimated from the difference between the prediction errors when the length of the predictors is sufficiently large. The sufficient filter length for achieving the optimal prediction is also derived. Based on the estimated parameters, both batch and adaptive minimum-mean-square-error equalizers are developed. The performance of the proposed equalizers is evaluated by computer simulations and compared with existing algorithms.

  • PDF

A Study on the Evaluation Algorithm for Performance Improvement in PV Modules

  • Kim, Byung-ki;Choi, Sung-sik;Wang, Jong-yong;Oh, Seung-Taek;Rho, Dae-seok
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권3호
    • /
    • pp.1356-1362
    • /
    • 2015
  • The location of PV systems in distribution system has been increased as one of countermeasure for global environmental issues. As the operation efficiency of PV systems is getting decreased year by year due to the aging phenomenon and maintenance problems, the optimal algorithm for state diagnosis in PV systems is required in order to improve operation performance in PV systems. The existing output prediction algorithms considering various parameters and conditions of PV modules could have complicated calculation process and then their results may have a possibility of significant prediction error. To solve these problems, this paper proposes an optimal prediction algorithm of PV system by using least square methods of linear regression analysis. And also, this paper presents a performance evaluation algorithm in PV modules based on the proposed optimal prediction algorithm of PV system. The simulation results show that the proposed algorithm is a practical tool of the state diagnosis for performance improvement in PV systems.

피드백에 의한 GMDH 알고리듬 성능 향상에 관한 연구 (A Study on the Performance Improvement of GMDH Algorithm by Feedback)

  • 홍연찬
    • 한국정보통신학회논문지
    • /
    • 제14권3호
    • /
    • pp.559-564
    • /
    • 2010
  • 복잡한 비선형 시스템을 예측하기 위하여 GMDH(Group Method of Data Handling) 알고리듬을 사용할 수 있다. 기존의 GMDH 알고리듬은 정해진 절차에 의해 입력층부터 중간층들을 거쳐 출력층에서 시스템의 예측 출력을 생성한다. 각 층의 출력은 전 층의 출력에 의해서만 생성된다. 그러나 전형적인 GMDH 알고리듬에서 층별로 최적의 구조가 결정되지만 전체적으로는 최적의 구조가 결정되지 않을 수도 있다는 문제점을 해결하기 위해 예측된 출력을 실제의 출력과 비교하여 그 에러를 피드백하여 전체적으로 최적의 구조를 가지는 GMDH 예측 모델을 구성함으로 써 보다 정확한 예측이 가능하도록 하였다. 제안된 알고리듬이 기존의 알고리듬보다 성능이 향상된 것을 컴퓨터 시뮬레이션을 통해 검증하였다.

Wind Power Interval Prediction Based on Improved PSO and BP Neural Network

  • Wang, Jidong;Fang, Kaijie;Pang, Wenjie;Sun, Jiawen
    • Journal of Electrical Engineering and Technology
    • /
    • 제12권3호
    • /
    • pp.989-995
    • /
    • 2017
  • As is known to all that the output of wind power generation has a character of randomness and volatility because of the influence of natural environment conditions. At present, the research of wind power prediction mainly focuses on point forecasting, which can hardly describe its uncertainty, leading to the fact that its application in practice is low. In this paper, a wind power range prediction model based on the multiple output property of BP neural network is built, and the optimization criterion considering the information of predicted intervals is proposed. Then, improved Particle Swarm Optimization (PSO) algorithm is used to optimize the model. The simulation results of a practical example show that the proposed wind power range prediction model can effectively forecast the output power interval, and provide power grid dispatcher with decision.

저주파 필터 특성을 갖는 다층 구조 신경망을 이용한 시계열 데이터 예측 (Time Series Prediction Using a Multi-layer Neural Network with Low Pass Filter Characteristics)

  • Min-Ho Lee
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제21권1호
    • /
    • pp.66-70
    • /
    • 1997
  • In this paper a new learning algorithm for curvature smoothing and improved generalization for multi-layer neural networks is proposed. To enhance the generalization ability a constraint term of hidden neuron activations is added to the conventional output error, which gives the curvature smoothing characteristics to multi-layer neural networks. When the total cost consisted of the output error and hidden error is minimized by gradient-descent methods, the additional descent term gives not only the Hebbian learning but also the synaptic weight decay. Therefore it incorporates error back-propagation, Hebbian, and weight decay, and additional computational requirements to the standard error back-propagation is negligible. From the computer simulation of the time series prediction with Santafe competition data it is shown that the proposed learning algorithm gives much better generalization performance.

  • PDF

A NODE PREDICTION ALGORITHM WITH THE MAPPER METHOD BASED ON DBSCAN AND GIOTTO-TDA

  • DONGJIN LEE;JAE-HUN JUNG
    • Journal of the Korean Society for Industrial and Applied Mathematics
    • /
    • 제27권4호
    • /
    • pp.324-341
    • /
    • 2023
  • Topological data analysis (TDA) is a data analysis technique, recently developed, that investigates the overall shape of a given dataset. The mapper algorithm is a TDA method that considers the connectivity of the given data and converts the data into a mapper graph. Compared to persistent homology, another popular TDA tool, that mainly focuses on the homological structure of the given data, the mapper algorithm is more of a visualization method that represents the given data as a graph in a lower dimension. As it visualizes the overall data connectivity, it could be used as a prediction method that visualizes the new input points on the mapper graph. The existing mapper packages such as Giotto-TDA, Gudhi and Kepler Mapper provide the descriptive mapper algorithm, that is, the final output of those packages is mainly the mapper graph. In this paper, we develop a simple predictive algorithm. That is, the proposed algorithm identifies the node information within the established mapper graph associated with the new emerging data point. By checking the feature of the detected nodes, such as the anomality of the identified nodes, we can determine the feature of the new input data point. As an example, we employ the fraud credit card transaction data and provide an example that shows how the developed algorithm can be used as a node prediction method.

태양광전원의 성능향상을 위한 상태진단 알고리즘 개발 (Development of State Diagnosis Algorithm for Performance Improvement of PV System)

  • 최성식;김태연;박재범;김병기;노대석
    • 한국산학기술학회논문지
    • /
    • 제15권2호
    • /
    • pp.1036-1043
    • /
    • 2014
  • 환경오염과 에너지위기 문제를 해결하기 위하여 세계적으로 태양광전원의 설치가 매년 증가하고 있다. 하지만, 설치된 태양광모듈은 경년열화로 인한 성능저하와 운용상의 다양한 장애요소로 발전량 손실이 발생하여, 태양광모듈의 효율적인 운용을 위한 발전량예측과 상태진단 기술이 요구되고 있다. 기존의 발전량 예측 방법은 많은 파라미터를 고려해야하기 때문에 계산이 복잡하며, 표준시험 조건의 모듈 특성데이터를 사용하기 때문에 오차가 크게 발생한다. 따라서 본 논문에서는 태양광모듈에서 발생하고 있는 문제점을 분석하고 이에 대한 대책을 제시하기 위하여, 선형회귀분석법을 이용한 발전량 예측 알고리즘과 태양광모듈의 상태를 진단하는 알고리즘을 제안하였다. 또한, 이를 바탕으로 태양광모듈의 상태진단 평가시스템을 구현하여 시뮬레이션을 수행한 결과, 기존의 방법에 비하여 제안한 방법이 계산하기 편리하고 예측 오차도 감소함을 확인하였으며, 이상모듈의 상태와 위치를 신속하게 파악할 수 있어, 태양광모듈의 운용효율 향상에 유용함을 확인하였다.

선형 예측을 위한 새로운 반사계열 추정 알고리즘 (A New Reflection coefficient-Estimation Algorithm for Linear Prediction)

  • 조기원;김수중
    • 대한전자공학회논문지
    • /
    • 제19권4호
    • /
    • pp.1-5
    • /
    • 1982
  • 래티스 공식에 기초를 두어 선형 예측을 위한 새로운 알고리즘을 구하였다. 알고리즘의 출력은 all-po1e모델의 안정도를 보장하는 반사계수이다. 매 예측 단계에서 예측 오차의 공분산(cova.iance)을 순환적으로 계산하는 방정식이 유도되었고 이 식을 계산하는 과정에서 예측 계수에 관계없이 반사 계사를 추정하도록 하였다. 공분산 래티스(covariance-lattice)방법과 비교하였을 때 새로운 알고리즘은 계산의 량을 약 반으로 줄였으며 예측 차수가 높은 경우에 보다 효률적이 된다는 것을 설명하였다.

  • PDF

GOV구조를 이용한 MPEG-4 비트율 제어기법 (MPEG-4 Rate Control Using GOV Structure)

  • 박지호;김종호;정제창
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
    • /
    • pp.2056-2059
    • /
    • 2003
  • The rate control is very important to solve the difficulties arising from bit-rate on transmission through channel and to improve video quality. It is very important to point out that the amount of output bit obtained the encoding process using rate controller brings many problems on the transmission of channels and furthermore output bitstream decoded affects directly on the visual quality of displayed subject. In this paper, the effective rate control algorithm by rate-distortion modeling using MPEG-4 encoder is proposed. The proposed rate control has applied different weighting by VOP prediction type and even in the same VOP prediction type, the predicted reference allocates more bit. Through these bit allocation the minimization of distortion can be achieved preventing propagation of quantization error The amount of saved bitstream obtained by the proposed algorithm in this thesis is allocated to I-VOP using region of interest(ROI) selective enhancement on the next GOV encoding process and this process brought the improvement of visual quality.

  • PDF