• Journal of the Korean Home Economics Association
• /
• v.35 no.1
• /
• pp.389-400
• /
• 1997

Name and change of style of Chopni were inspected to understand transformation of Chosun costume. During Chosun era Chopni had two significant roles(general) daily clothes and Yungbok; prior to the mid-Chosun it was largely used as daily clothes but after the mid-Chosun it was mainly used as Yungbok, In the case of daily clothes Chopni was utilized as under-coat among various coats and had the name of Chopni symbolizing function of clothes. In the case of YUNGBOK it was used as outer clothing of military men had the name of Cholik symbolizing form of clothes. These facts represent that emphasis was placed on beauty in the case of YUNGBOK to confer ceremonial meaning as outer clothes. In transformation of costume examining by change of Chopni we can see that name and style are changed with role of clothes That is when clothes is used as under such as under-coat name and style mainly represent function whereas they mainly represent beauty when used as outer clothes such as YUNGBOK In addition change of role might be considered as an independent variable which changed name and style dependently. That is change of style produced change of name and time lay between change of style and change of name was found to be about 1 centry.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.2
• /
• pp.164-176
• /
• 1990

Kok-Ryung covers the collar of underwear and protects the neck. It is between outer garment and underwear and its form is bent. According to literature, Cheom-Yu, Keup, and Pang-Ryung belong to Kok-Ryung. Kok­Ryung was used in Yemaek and also it was used as a part of the uniform of government officer in Song Dynasty. The results of the study were as follows: 1) With the changes of the times, Cheom-Yu was used in Ju Dynasty, Pang-Ryung was used in Han Dynasty, and Kok-Ryung was used from Nam-Jo through Soo, Tang, Song Dynasity. 2) Cheom-yu, Pang-Ryung, and Kok-Ryung were all made of long rectangular cloth. How­ever, Chemo-Yu and Pang-Ryung were adjusted in front of the neck, Kok-Ryung was adjusted on the back. 3) The purpose of Kok-Ryung was practial one of sweat clothes at first. But it became for decoration and dignity gradually. Therefore, the users of it were changed from the common people to high government officers. 4) Cheom-Yu, Po-Ryung, Keup, and Pang-Ryung were all a kind of scarf and they are the same with Kok-Ryung in the respect. They were put on between outer garment and underwear or attached under the collar of outer garment. 5) Kok-Ryung of Song-Sa seems to be the round collar the uniform of government officers and it is different from Kok-Ryung of Suk-Myung.

• Journal of Species Research
• /
• v.9 no.3
• /
• pp.221-232
• /
• 2020

Selaginella vaginata is a common montane species with broad distribution in China and the Himalaya region, and several species that are morphologically similar to S. vaginata are distributed in Asia. The taxonomic revision of S. vaginata and related species was performed by morphological comparison of leaves, strobili, and spores, and phylogenetic analysis. Based on these results, a new species, S. subvaginata, sp. nov., has been identified. Morphologically, S. subvaginata has intermediate form between S. vaginata and S. repanda, which differs mainly in its main stem being erect, dorsal leaves long-ciliolate on inner margin and outer margin denticulate or with 2-4 cilia at base (long-ciliolate on both inner and outer margins in S. vaginata, denticulate on both inner and outer margins in S. repanda), and acroscopic base of ventral leaves long ciliolate (sparsely long ciliolate in S. vaginata, short ciliolate to denticulate in S. repanda). Moreover, phylogenetic analysis using three chloroplast markers(rbcL, atpI, and psbA) revealed that S. subvaginata is a distinct species among the anisosporophyllous species clade in Selaginellaceae.

• Nuclear Engineering and Technology
• /
• v.49 no.1
• /
• pp.124-133
• /
• 2017

In-vessel retention by passive external reactor vessel cooling under severe accident conditions is a viable approach for retention of radioactive core melt within the reactor vessel. In this study, a new and versatile coating technique known as "cold spray" that can readily be applied to operating and advanced reactors was developed to form a microporous coating on the outer surface of a simulated reactor lower head. Quenching experiments were performed under simulated in-vessel retention by passive external reactor vessel cooling conditions using test vessels with and without cold spray coatings. Quantitative measurements show that for all angular locations on the vessel outer surface, the local critical heat flux (CHF) values for the coated vessel were consistently higher than the corresponding CHF values for the bare vessel. However, it was also observed for both coated and uncoated surfaces that the local rate of boiling and local CHF limit vary appreciably along the outer surface of the test vessel. Nonetheless, results of this intriguing study clearly show that the use of cold spray coatings could enhance the local CHF limit for downward-facing boiling by > 88%.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.11
• /
• pp.929-935
• /
• 2015

The long neck flange is used to connect piping arrangements where the lap joint is applied. Generally, the component can be manufactured by welding, but this method is both time and cost intensive. Embrittlement at the heat affected zones was also considered. A spinning method developed to improve the manufacturing process and solve the problems of welding. The flange area of the long neck flange can be formed by changing the direction of the metal flow, from axial to radial, while maintaining pressure by using an outer mold and a lap roller. A modified process was additionally developed using a round roller rather than the outer mold. In this modification, the round roller can form the shape of all sizes of long neck flange. Using these flexible methodologies, the cost to prepare outer molds and the time to install and remove the molds can be significantly reduced.

• Steel and Composite Structures
• /
• v.38 no.6
• /
• pp.739-749
• /
• 2021

This paper introduces an improved design equation to evaluate the resisting capacity of circular reinforced concrete (RC) columns partially strengthened with outer steel tube. When RC column members are required to be strengthened according to the change in the loadings considered and/or the deterioration progress in columns, wrapping up RC column with steel circular tube, which takes the form of concrete filled steel tube (CFST), has been popularly considered because of its structural advantage induced from the confinement effect. However, the relatively high construction cost of steel tube is restricting its use to the required region, while deriving the shape of a partial CFST column. To evaluate the resisting capacity of a partial CFST column, numerical analyses need to be performed, and a numerical model proposed in the previous study for the numerical analysis of full CFST columns is used to conduct parametric studies for the introduction of a design equation. The bond-slip effect developed along the interface between the in-filled concrete and the exterior steel tube is taken into consideration and the validity of the numerical model has been established through correlation studies between experimental data and numerical results for partial CFST circular columns. Moreover, parametric studies make it possible to introduce a design equation for determining the optimum length of outer steel tube which produces partial CFST circular columns.

• Applied Microscopy
• /
• v.52
• /
• pp.6.1-6.5
• /
• 2022

We examined the morphology of the fertilized egg and the fine structure of fertilized egg envelopes of Poropanchax normani belonging to the family Poeciliidae, also known as Norman's lampeye using light and electron microscopes. The fertilized eggs with narrow perivitelline space were found to be spherical and demersal, additionally containing small oil droplets in the vitelline membrane. Further, a bundle of adhesive filaments was observed to be present on one side of the fertilized egg. These filaments possessed remarkably high elasticity and were approximately 1-3mm in length. The size of the fertilized egg was determined to be about 1.49 ± 0.07mm (n=30). The outer surface appeared smooth, and adhesive filaments originating at different location of the surface of the envelope were found to be distributed around the egg envelope and were joined together to form a single long bundle in scanning electron microscopic observation. A peak-like structure formed of several straight wrinkles was observed around the micropyle. However, the complete structure of the micropyle could not be studied due to the depth at which it was located. Additionally, the total thickness of the egg envelope was ascertained to be approximately12.5-14.5㎛. The egg envelope consisted of two distinct layers, an outer electron dense layer and an inner lamellar layer, further consisting of 10 sublayers of varying thicknesses. Collectively, it was observed that the morphological characteristics of the fertilized egg, fine structures surrounding the micropyle, outer surface, adhesive structure consisting adhesive filaments, and sections of fertilized egg envelope displayed species specificity.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1028-1031
• /
• 2003

The implementation of PI controller with the FPGA is for controlling the speed of DC motor in the digital system. FPGA is assigned to 1. Outer speed control loop. The signal from the speed comparison will be in the PI controlling form transfer function of Direct Form I or PI Parallel Form. 2.Inner current control loop. The signal from the current comparison will be converted into switching function in sliding mode condition. Its output will be a controller of DC motor in the next step. The result from using FPGA will be close to the value of simulation in the analog control system. The sampling rate 40 kHz and 16 bit of 2's complement data are defined in this presentation.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.2
• /
• pp.112-122
• /
• 1995

While many surfaces such as automobile outer panels, ship hulls and airfoils are characterized by their smooth, free-form shapes, a far larger class of functional surfaces are characterized by highly irregular, multi-featured shapes consisting of pockets, channels, ribs, etc. In constaract to the design of aesthetic, free-form surfaces, functional surface design can perhaps best be viewed as a process of assembling a collection of known component surfaces to form a single compound surface. In this paper, we presents a feature-based functional surface modeling method. A single feature involves a secondary surface, which we must join to a primary surface with a smooth transition between two boundary courves. Through recursive blending of a secondary surface with the primary surface, the mullti-featured surface is represented. After constructing a compound surface, we generate the Z-map for NC machining of the surface. Offsetting the Z-map using the inverse offsetting technique, we get CL tool paths with out gouging.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.190-196
• /
• 2004

ACR(All Clear Reflector), also widely referred to as FFR(Free Form Reflector), were designed in general and intelligent ways using a NUDBS surface for the mathematical modelling of the reflector shape and artificial intelligence as the optimum design algorithm. An ACR, which consists of a continuous surface reflector and clear outer lens, offers styling advantages and provides a high quality light performance. The clear outer lens of an ACR remains efficient even with a highly inclined shape, as in the design of a sports car, as well as the complete clearness of the reflector surface eliminates the nuisance of stray light caused by the steps between adjacent segments of multi-faced reflectors. The application of an ACR to low beam lamp was so sucessful to obtain the sharp cut-off with the lens-free single-surfaced-smooth reflector. The design technique of ACR was tested with all types of lamps, including low beams, high beams, and fog lamps.