Browse > Article
http://dx.doi.org/10.7736/KSPE.2015.32.11.929

Development of Manufacturing Process for Long-Neck Flange by Spinning  

Gwak, Gi Yeol (Department of Mechanical Engineering, Korea Maritime and Ocean University)
Cho, Jong Rae (Department of Mechanical Engineering, Korea Maritime and Ocean University)
Choi, Jin Young (Technical Service Team, Pessco Co., Ltd.)
Publication Information
Journal of the Korean Society for Precision Engineering / v.32, no.11, 2015 , pp. 929-935 More about this Journal
Abstract
The long neck flange is used to connect piping arrangements where the lap joint is applied. Generally, the component can be manufactured by welding, but this method is both time and cost intensive. Embrittlement at the heat affected zones was also considered. A spinning method developed to improve the manufacturing process and solve the problems of welding. The flange area of the long neck flange can be formed by changing the direction of the metal flow, from axial to radial, while maintaining pressure by using an outer mold and a lap roller. A modified process was additionally developed using a round roller rather than the outer mold. In this modification, the round roller can form the shape of all sizes of long neck flange. Using these flexible methodologies, the cost to prepare outer molds and the time to install and remove the molds can be significantly reduced.
Keywords
Lap-Joint; Long-Neck flange; Spinning;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Araki, K., "Manufacturing Method of Lap-Joint Pipe," JPN Patent, No. Shou64-71527, 1989.
2 ASME No. B16.9, "Factory-Made Wrought Buttwelding Fittings," 2007.
3 Cho, G. R., Bae, W. B., and Choi, G. D., "Pipe Joint Forming Method by Local Rapid-Heating," KOR Patent, No. 2003-0062470, 2003.
4 Kim, J. S., Cho, J. R., and Jeong, H. S., "Manufacturing Method of Long-Neck Flange," KOR Patent, No. 10-0688066, 2007.
5 Park, J. E., Han, C. S., Choi, S., Kim, S. S., and Na, K. H., "The Spinnability of Multi-Step Cylindrical Cup in Spinning Process," Proc. of KSPE Spring Conference, pp. 1016-1020, 2001.
6 Hong, L. P., "The Development of Manufacturing Method Using Spinning Process of Ingegrated Stubend for Piping Connection," M.Sc. Thesis, Department of Mechanical Engineering, Korea Maritime and Ocean University, 2013.
7 Gwak, G. Y., Jeon, J. W., Cho, J. R., Choi, J. Y., and Kim, J. S., "Development of Integrated Stub End by Spinning Process," Int. J. Precis. Eng. Manuf., Vol. 16, No. 7, pp. 1473-1477, 2015.   DOI
8 Gwak, G. Y., "A Study on the Development of Manufacturing Process for Integrated Stub End by Spinning," Ph.D. Thesis, Department of Mechanical Engineering, Korea Maritime and Ocean University, 2015.