• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.4
• /
• pp.504-511
• /
• 2000

PIV(Particle Image Velocimetry) is a recently developed technique for visualizing the fluid velocity fields. Because it has several advantages over the LDV(Laser Doppler Velocimetry), it became one of the most popular diagnostic tools in spite of its short history. However, its application to combustion is restricted by some problems such as flame illumination, scattered light refraction, particle density variation due to heat release, the combined effect of abrupt change in particle density and fluid velocity on flame contour, and thermophoresis which is particle lagging due to temperature gradient. These problems are expected to be originated from the non-continuous characteristics of flames and the limitations of particle dynamics. In the present study, these problems were considered for the visualization of the instantaneous coaxial hydrogen diffusion flame. And the instantaneous flame contour was detected using particle density difference. The visualized diffusion flame velocity field shows its turbulent and meandering nature. It was also observed that the flame is located inside the outer shear layer and flame geometry is largely influenced by the vorticity.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.5
• /
• pp.48-56
• /
• 2000

This study aims to find out the norms and principles reflected in the spatial organization of royal tombs in the Chosun Dynasty through the modern interpretation of traditional oriental philosophy theory. We examined the characteristics of royal tomb sites including Jeshil(Shrine), Hongjunmun, tomb mound, ponds, and attached buildings employing an analysis of the spatial formation and landscape. This study covered 36 tombs of kings and queens in the Chosun Dynasty. The entire layout of royal tombs, including annexed buildings, was informal in may cases. This was due to following the natural contour rather than adhering to certain philosophical principles. The royal tomb site is divided into three zones. Jeshil and pond constitute a space for living people, visitors. Secondly, the semi-scared space includes the space from Hongjunmun to the entrance to the Chungjaka. The last space is for the dead, from the back of Chungjakak to tomb mound. This is in line with the layout of palaces of the Chosun Dynasty which is characterized by "three gates and three zones": outer yard-court yard- back yard. The size of the space for holding memorial ceremonies, from Hongjunmun to the Chungjakak entrance, was set at 900m until the early Chosun Dynasty. Since that time the distance varied according to the land topography due to the influence of metaphysics. It can be summarized that the spatial organization of royal tombs in the Chosun Dynasty is based on the Confucianism value, the natural contour of the site, and inner spiritual value.ual value.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.660-662
• /
• 2009

Purpose: There are several modalities to reattach the amputated auricle. Microvascular replantation can achieve the best outcome, but technically difficult. Conventional composite graft is technically easy, but uniformly unsuccessful. Our successful experience of reattachment using postauricular subcutaneous pocket is presented. Methods: The amputated tissue was placed in its anatomical position with buried sutures. The amputated part is dermabraded to remove the epidermis and outer layer of dermis(Fig. 1, Center, left). Postauricular skin flap was then raised and the reattached dermabraded ear was buried beneath the flap(Fig. 1, Center, right). Two weeks after the original surgery, the buried ear was removed from its pocket (Fig. 1, Below, left). Results: The ear was reepithelialized spontaneously in 7 days. At 3 months, the reattached ear has satisfactory appearance without contour deformity(Fig. 1, Below, right). Conclusion: This technique provides increase in contact surface between the amputated segment and the surrounding tissues which supply blood, serum, oxygen and nutrients, maximizing the probability of "take". Minimally injured dermis can be healed from spontaneous reepithelialization and provides minimal contour deformity. We have used this non-microsurgical technique with very satisfying outcome.

• Korean Journal of Cognitive Science
• /
• v.27 no.3
• /
• pp.355-376
• /
• 2016

We used holes defined by color similarity (Experiment 1) and binocular disparity (Experiment 2) to study how the inner contour of an object (i.e., boundary of a hole in it) is encoded in visual working memory. Many studies in VWM have shown that an object's boundary properties can be integrated with its surface properties via their shared spatial location, yielding an object-based encoding benefit. However, encoding of the hole contours has rarely been tested. We presented objects (squares or circles) containing a bar under a change detection paradigm, and relevant features to be remembered were the color of objects and the orientation of bars (or holes). If the contour of a hole belongs to the surrounding object rather than to the hole itself, the object-based feature binding hypothesis predicts that the shape of it can be integrated with color of an outer object, via their shared spatial location. Thus, in the hole display, change detection performance was expected to better than in the conjunction display where orientation and color features to be remembered were assigned to different parts of a conjunction object, and comparable to that in a single bar display where both orientation and color were assigned into a single bar. However, the results revealed that performance in the hole display did not differ from that in the conjunction display. This suggests that the shape of holes is not automatically encoded together with the surface properties of the outer object via object-based feature binding, but encoded independently from the surrounding object.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.5
• /
• pp.24-32
• /
• 2010

In this study, we have proposed a pre-processing algorithm newly developed for improving the tracking efficiency of the optical flow method. The developed pre-processing algorithm consists of a median filter, binarization, morphology, canny edge, contour detecting and an approximation method. In order to evaluate whether the optical flow tracking capacity increases, this study applied the pre-processing algorithm to the Lucas-Kanade(LK) optical flow algorithm, and comparatively analyzed its images and tracking results with those of optical flow without the pre-processing algorithm and with the existing pre-processing algorithm(composed of median filter and histogram equalization). As a result, it was observed that the tracking performance derived from the LK optical flow algorithm with the pre-processing algorithm, shows better tracking accuracy, compared to the one without the pre-processing algorithm and the one with the existing pre-processing algorithm. It seems to have resulted by successful segmentation for characteristic areas and subdivision into inner and outer contour lines.

• Nuclear Engineering and Technology
• /
• v.35 no.5
• /
• pp.369-377
• /
• 2003

Since Zr-2.5Nb pressure tubes have a high risk for the formation of blisters during their operation in pressurized heavy water reactors, there has been a strong incentive to develop a method for the non-destructive detection of blisters grown on the tube surfaces. However, because there is little mismatch in acoustic impedance between the hydride blisters and zirconium matrix, it is not easy to distinguish the boundary between the blister and zirconium matrix with conventional ultrasonic methods. This study has focused on the development of a special ultrasonic method, so called ultrasonic velocity ratio method for a reliable detection of blisters formed on Zr-2.5Nb pressure tubes. Hydride blisters were grown on the outer surface of the Zr-2.5Nb pressure tube using a cold finger attached to a steady state thermal diffusion equipment. To maximize a difference in the ultrasonic velocity in hydride blisters and the zirconium matrix, the ultrasonic velocity ratio of longitudinal wave to shear wave, $V_L/V_S$, has been determined based on the flight time of the longitudinal echo and reflected shear echo from the outer surface of the tubes. The feasibility of the ultrasonic velocity ratio method is confirmed by comparing the contour plots reproduced by this method with those of the blisters grown on the Zr-2.5Nb pressure tubes.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.5
• /
• pp.137-146
• /
• 2020

The manual measurements of 182 unmarried women subjects in their 20s was classified 4-breast types. For the breast type classification, 4 factors were identified, such as overall breast factor, upper breast internal shape factor, breast volume factor, and lower breast external shape factor. The breast shapes were 'breast with well-grown upper part', 'flat breast', 'breast with well-grown lower part', and 'protruded breast'. The breast types can be differentiated in 10 items of actual anthropometric dimension the length between frontal neck point and nipple point, length between lateral neck point and nipple point, length between the breast inner points, nipple to nipple breadth, diameter below the breast, inner depth of breast, outer length of breast, length below the breast, length between breast outer point and upper breast point, and contour line length below the breast.

• Journal of computational fluids engineering
• /
• v.12 no.4
• /
• pp.7-13
• /
• 2007

Numerical analysis is carried out for combined heat transfer in an indirected NIR(Near Infrared Ray) heating chamber. Reynolds number and shapes of absorbed cylinder are known as important parameters on the combined heat transfer effects. Reynolds number based on the outer diameter of the cylinder is varied from $10^3$ to $3{\times}10^5$. Four difference heat transfer regimes are observed: forced convection and radiative heat transfer on the outer surface of the cylinder, pure conduction in the cylinder body, pure natural convection and radiation between lamp surface and inner surface of the cylinder, and radiation from the lamp. Flow and temperature characteristics are presented with iso-contour lines for the absorbed circular and elliptic cylinders to compare their differences. The convective and radiative heat transfer fluxes are also compared with different Reynolds numbers. As usual, Reynolds number is an important factor to estimate increasing convective heat transfer as it increases. The shape of absorbed cylinder results overall heat transfer rates remain unchanged.

• Korean Journal of Cognitive Science
• /
• v.22 no.3
• /
• pp.235-254
• /
• 2011

Two experiments were conducted to investigate the impact of binocular disparity information on Neon color spreading (NCS). The stimuli was the modification of Ehrenstein figure used by Redies and Spillmann(1981); inner and outer segments were achromatic and middle segments was chromatic. In experiment 1, the effect of binocular disparity was tested in each segment that were divided inner, middle and outer segments. In experiment 2, the impact of added segments that were put in different depth place were tested. The results showed that the segments on same place were, the clearer the NCS was. Consistent with the previous studies, the effect of color segment in front or in behind was not appeared. The case of added segments, regardless of added segments were placed either front or behind, the NCS was reduced. But the effect of added outer segments was more affect then added inner segments. This results were suggested that NCS could be affected by depth information but more affected by stage of before depth processing.

• Archives of Craniofacial Surgery
• /
• v.12 no.1
• /
• pp.33-36
• /
• 2011

Background: In a frontal sinus reconstruction, the literature primarily recommends a surgical approach for definite treatment with the exception of for anterior wall fractures with no dislocation. Many studies have assessed a range of methods for the reduction of frontal sinus fractures. This paper presents a case, in whom the anterior wall of the frontal sinus was reconstructed using an outer table calvarial bone graft in an en bloc manner. Patient and methods: A 36-year-old male visited the emergency room with a heavy injury to the forehead. He was diagnosed with fractures of the anterior and posterior wall of the frontal sinus. The neurosurgeon removed the fractured area and repaired the meninges. Afterwards, cranialization was performed and the opening of the nasofrontal duct was obstructed. After fixing the removed bone to its original location, all fragments of fractured anterior wall were purged out and the anterior wall reconstructed using an en bloc calvarial bone graft. Results: In the post-operative 8 months period, there were no complications, the round contour of the forehead was expressed well and the patient was satisfied with the result. Conclusion: There are many methods for reconstructing the anterior wall of the frontal sinus. On the other hand, in cases of large fracture sites with many fractured bone fragments, en bloc harvesting of the outer table calvarial bone could be a better choice than making use of only plates and screws because this method shows a good results in terms of aesthetics with a low complication rate.