Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지

Non-Destructive Detection of Hydride Blister in PHWR Pressure Tube Using an Ultrasonic Velocity Ratio Method

  • Published : 2003.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

Since Zr-2.5Nb pressure tubes have a high risk for the formation of blisters during their operation in pressurized heavy water reactors, there has been a strong incentive to develop a method for the non-destructive detection of blisters grown on the tube surfaces. However, because there is little mismatch in acoustic impedance between the hydride blisters and zirconium matrix, it is not easy to distinguish the boundary between the blister and zirconium matrix with conventional ultrasonic methods. This study has focused on the development of a special ultrasonic method, so called ultrasonic velocity ratio method for a reliable detection of blisters formed on Zr-2.5Nb pressure tubes. Hydride blisters were grown on the outer surface of the Zr-2.5Nb pressure tube using a cold finger attached to a steady state thermal diffusion equipment. To maximize a difference in the ultrasonic velocity in hydride blisters and the zirconium matrix, the ultrasonic velocity ratio of longitudinal wave to shear wave, $V_L/V_S$, has been determined based on the flight time of the longitudinal echo and reflected shear echo from the outer surface of the tubes. The feasibility of the ultrasonic velocity ratio method is confirmed by comparing the contour plots reproduced by this method with those of the blisters grown on the Zr-2.5Nb pressure tubes.

Keywords

References

  1. G. J. Field, J. T. Dunn and B. A. Cheadle, 'Analysis of the failure at Pickering NGS 'A' Unit 2 nuclear systems department', Can. Met. Quartely, 24, 181(1985)
  2. M. Legar and et al., 'Growth, fracture, and nondestructive evaluation of hydride blisters in Zr-2.5Nb pressure tubes,' 8th Symp. on 'Zirconium in the Nuclear Industry', ASTM STP 1023, L. F. P. Vart Swam and C. M. Eucken, Eds., ASTM, p.50(1989) https://doi.org/10.1520/STP18857S
  3. Y. M. Cheong, U. S. Gong, K. N. Choo, S. S. Kim, Y. S. Kim, 'Formation and growth of hydride blisters in Zr-2.5Nb pressure tubes', J. Korean Nucl. Soc., 33(2) 192 (2001)
  4. Y. M. Cheong, and et al. 'Cantilever beam test of Zr-2.5Nb pressure tube with hydride blister', Proc. Spring Conf. Korean Nuclear Society (2000)
  5. Y. M. Cheong, and et al., 'Measurement of residual stresses due to hydride blister in the zirconium pressure tube', Proc. Materials and Fracture, Korea Society of Mechanical Engineers 128 (2001)
  6. G. Domizzi, and et al., 'Blister growth in zirconium alloys: experimentation and modeling', J. Nucl. Mater. 229, 36 (1996) https://doi.org/10.1016/0022-3115(95)00204-9
  7. A. Sawatzky, 'Formation of hydride blisters in zirconium alloy pressure tubes', Can. Met. Quartely, 24, 227 (1985)
  8. G. Domizzi and et al., 'Hydride distribution around a blister in Zr-2.5Nb pressure tubes', J. Nucl. Mater., 275, 255 (1999) https://doi.org/10.1016/S0022-3115(99)00130-0
  9. J. L. Singh and et al., 'Experience of detection blisters in irradiated coolant channels of Indian pressurized heavy water reactors', Proc. Zirconium Alloys for Reactor Components-2002, 653 (2002)
  10. R. N. Singh and et al., 'Study of hydride blisters in zirconium alloy pressure tube spools and their detection using an ultrasonic technique', Proc. Joint EC-IAEA Specialist Meeting, p. 53, Patten, 10-12 March (1999)
  11. Y. H. Kim and J. K. Lee, H. C. Kim, 'Observation of shear wave modes in the echoes of the longitudinal wave transducer', Review of Progress in Quantitative Nondestructive Evaluation, 24, 987 (1996)
  12. Y. S. Kim and et al., 'Procedures for characterization of Zr-2.5Nb pressure tubes', KAERI/TR-1329/99, Korea Atomic Energy Research Institute (1999)
  13. Metals Handbook, 9th ed., Vol. 17, 'Nondestructive Evaluation and Quality Control', p. 235, ASM International, (1989)