• 한국식생활문화학회지
• /
• 제27권5호
• /
• pp.496-504
• /
• 2012

The objective of this study was to investigate the phasic characteristics of the adjustment process to Korean food with an analysis of Japanese independent tourist culture social resistance factors. To collect data for empirical study, a survey was distributed to 284 Japanese tourists through Korean travel agencies. Logistic regression analysis was carried out in order to determine media and cultural beliefs affecting the diffusion process of Korean food. The results showed that cultural beliefs had no significant effects on the diffusion process of most Korean food. However, people who valued similarities between the two countries-South Korea and Japan-demonstrated a significant effect on performance and identification group. Therefore, cultural beliefs did not influence the diffusion of Korean food, although there are surely cultural beliefs and subjective factors affecting their reform decisions.

• Journal of Ginseng Research
• /
• 제9권2호
• /
• pp.248-255
• /
• 1985

In order to investigate the optimal drying condition of white ginseng by using bulk air drier(130 x 62 x 65cm), drying curves, diffusion coefficient at various drying temperature, the energy of activation, variation of color intensity and chemical components during drying of white ginseng were studied. Fick's second low of diffusion for diffusion out of spheres was successfully applied to describe the drying of white ginseng. It was found that the diffusion coefficient of water was 2.2x107, 9.0x107 cm2/sec at drying temperature 4$0^{\circ}C$, 55$^{\circ}C$, respectively. An Arrhenius type temperature dependency of moisture diffusivity was found, the energy of activation being 18.8 Kcal/g mol. Color intensity of white ginseng dried at various drying temperature was increased with an increase in drying temperature. The contents of crude protein, reducing sugar and crude saponin during drying of white ginseng were gradually decreased as increasing of drying time. And with the sensory evaluation by multiple comparison difference analysis, the optimal drying temperature of white ginseng was between 45$^{\circ}C$ and 5$0^{\circ}C$.

• 산업기술연구
• /
• 제20권B호
• /
• pp.77-86
• /
• 2000

In order to observe the pattern forming of copper plate and chemical corrosion reaction, a study on the effect of the process parameters on the formation of micro-pattern by a photochemical etching of copper plate was carried out. The results are as follows : 1) Etching rate increases as the concentration of etchant increases under the regular condition of the temperature by the increasing of diffusion rate to surface. 2) Etching rate increases as the temperature of etchant increases by the fast acting of the material delivery of diffusion to surface under the regular condition of concentration. 3) It was found that etching speed increases as the material delivery of convection rising increased when the aeration speed of etchant increases. This result was from the fact acted by the material delivery of convection rising rather than material delivery of diffusion to the surface.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.239-241
• /
• 2009

In this paper, an estimation methodology for stand-by energy savings of electric appliances is proposed and some case studies are carried out for televisions. The methodology is based on learning curves and diffusion models, which are able to explain the market characteristics such as market prices and the diffusion speed. Some models were developed to estimate power and energy savings for high-efficient appliances and these model have been used broadly. These models are also applied to this study and modified to estimate stand-by energy savings.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.225-228
• /
• 2004

In order to estimate the chloride ion penetration, the model, which considers diffusion and sorption, is proposed on the basis of Finite Element Method (FEM). The FEM program provides the estimation of chloride concentration according to cyclic humidity and sorption. After the humidity diffusion analysis is carried out, the chloride ion diffusion and sorption analysis are conducted on the basis of the preestimated humidity data in each element. Each element has different analysis variables at different ages and locations. At early ages and constant outer humidity, the difference between inner and outer relative humidity causes the chloride ion penetration by sorption. As the humidity diffusion reduces the difference with age, the effect of sorption on the chloride ion penetration decreases. By the way, the cyclic humidity increases the effect of sorption on the chloride ion penetration at early ages, and the quantity of chloride ion around steel at later ages. Therefore, the in-situ analysis of chloride ion penetration for marine concrete structures must be performed considering the cyclic humidity condition and the long term sorption.

• Nuclear Engineering and Technology
• /
• 제29권1호
• /
• pp.7-14
• /
• 1997

Grain boundary diffusion plays a significant role in fission gas release, which is one of the crucial processes dominating nuclear fuel performance. Gaseous fission produce such as Xe and Kr generated during nuclear fission have to diffuse in the grain lattice and the boundary inside fuel pellets before they reach the open spaces in a fuel rod. These processes can be studied by 'tracer diffusion' techniques, by which grain boundary diffusivity can be estimated and directly used for low burn-up fission gas release analysis. However, only a few models accounting for the both processes are available and mostly handle them numerically due to mathematical complexity. Also the numerical solution has limitations in a practical use. In this paper, an approximate analytical solution in case of stationary grain boundary in a polycrystalline solid is developed for the tracer diffusion techniques. This closed-form solution is compared to available exact and numerical solutions and it turns out that it makes computation not only greatly easier but also more accurate than previous models. It can be applied to theoretical modelings for low bum-up fission gas release phenomena and experimental analyses as well, especially for PIE (post irradiation examination).

• 한국표면공학회지
• /
• 제16권3호
• /
• pp.98-107
• /
• 1983

A study on the improvement of wear resistance of brasses by electroplating and diffusion treatment of tin was carried out. The optimum condition of the treatment obtained was as follows. Plating thickness of tin : 5 - 9 $\mu\textrm{m}$ Condition of diffusion treatment : atmosphere ; fused nitrate bath (KNO3 + NaNO3) temperature and time ; 1st step 320$^{\circ}C$, 60min. and 450$^{\circ}C$, 30min. During the diffusion treatment, internetallic compounds of Cu-Sn were formed and these compounds were identified as η, $\varepsilon$ and $\delta$ phase from the outer tin layer. It was considered that the improvement of wear resistance of brasses by the treatment is because of the formation of intemetallic compounds particalarly $\varepsilon$phase which is very hard, between soft tin layer brass.

• 대한화학회지
• /
• 제53권5호
• /
• pp.585-608
• /
• 2009

이 연구에서는 용해와 확산에 관련된 과학 교사들의 사고 특성을 알아보았다. 이를 위하여 화 학 및 화학교육을 전공한 과학 교사 5명을 선정하여 면담하였다. 이들은 2년$\sim$6년 정도의 교사 경력을 가지고 있었다. 연구 결과, 중등 과학교사들은 다양한 혼합 현상을 용해나 확산으로 구분할 필요성을 거의 느끼지 않았다. 교사들이 다양한 혼합 현상을 구분하는 기준은 다양하였다. 또한 용해도와 깁스에 너지를 기준으로 용해와 확산을 구분하는 것에 과학 교사들은 어려움을 느꼈다. 교사들은 교과서에서 단원이 분리되어 제시된 내용을 연결 지어 사고하지 않았으며, 빠진 내용을 스스로 사고하여 필요한 원 리를 도입하는 노력도 거의 없었다. 면담 과정에서 교사들은 현상을 이해하기 위해 원리의 도입이 필요함 을 느끼게 되었지만, 스스로 이를 찾아내어 지도하는 능력을 획득하지는 못하였다. 그러므로 원리와 현 상을 서로 관련시켜 사고할 수 있도록 도와주는 교사교육 프로그램 및 과학교육과정의 개발이 필요하다.

• 경영과학
• /
• 제22권1호
• /
• pp.179-197
• /
• 2005

This study examines market acceptance for DMB service, one of the touted new business models in Korea's next-generation mobile communications service market, using adoption end diffusion of innovation as the theoretical framework. Market acceptance for DMB service was assessed by predicting the demand for the service using the Bass model, and the demand variability over time was then analyzed by integrating the innovation adoption model proposed by Rogers (2003). In our estimation of the Bass model, we derived the coefficient of innovation and coefficient of imitation, using actual diffusion data from the mobile telephone service market. The maximum number of subscribers was estimated based on the result of a survey on satellite DMB service. Furthermore, to test the difference in diffusion pattern between mobile phone service and satellite DMB service, we reorganized the demand data along the diffusion timeline according to Rogers' innovation adoption model, using the responses by survey subjects concerning their respective projected time of adoption. The comparison of the two demand prediction models revealed that diffusion for both took place forming a classical S-curve. Concerning variability in demand for DMB service, our findings, much in agreement with Rogers' view, indicated that demand was highly variable over time and depending on the adopter group. In distinguishing adopters into different groups by time of adoption of innovation, we found that income and lifestyle (opinion leadership, novelty seeking tendency and independent decision-making) were variables with measurable impact. Among the managerial variables, price of reception device, contents type, subscription fees were the variables resulting in statistically significant differences. This study, as an attempt to measure the market acceptance for satellite DMB service, a leading next-generation mobile communications service product, stands out from related studies in that it estimates the nature and level of acceptance for specific customer categories, using theories of innovation adoption and diffusion and based on the result of a survey conducted through one-to-one interviews. The authors of this paper believe that the theoretical framework elaborated in this study and its findings can be fruitfully reused in future attempts to predict demand for new mobile communications service products.

• 디지털융복합연구
• /
• 제14권12호
• /
• pp.85-93
• /
• 2016

본 연구에서는 소비자의 능동성이 확대되어가고 있는 광고 및 마케팅 환경에서 페이스북 이용 시 소비자가 광고를 확산시키는 현상에 관심을 가지고 연구를 진행하였다. 특히 수용자의 대표적인 능동적 미디어 이용 개념이자 상호작용과 같은 대인적 동기가 주용 이용동기인 페이스북 이용동기가 페이스북 광고 확산행동에 미치는 영향을 파악하고자 하였다. 이를 위하여 페아스북 이용동기 항목 추출을 위한 사전조사를 거쳐 대학생 243명을 대상으로 설문조사를 실시하였다. 페이스북 광고 확산행동 경험자와 비경험자의 페이스북 이용동기 차이를 살펴본 결과, 페이스북 광고 확산행동 경험자가 비경험자에 비하여 페이스북 이용동기가 전반적으로 크게 나타났으며, 발견된 페이스북 광고 확산행동 관련 수용자 특성들이 페이스북 광고 확산행동을 실제로 예측하는 변인인지 검증하기 위하여 로지스틱 회귀분석을 실시한 결과, '자기표현' 동기가 측정된 페이스북 광고 확산행동 모두에서 유의하게 나타났다.