• Journal of Technologic Dentistry
• /
• v.27 no.1
• /
• pp.27-39
• /
• 2005

This study is to show the qualitative analytic methods of facial asymmetry with three-dimensional morphometry and find out asymmetry change resulted from enlarging three local regions. Steel balls (1.2mm in diameter) were attached in twenty seven landmarks of a symmetrical artificial human skull. This artificial human skull was used as experimental materials. Twelve different asymmetrical artificial human skulls were formed by gradually enlarging the mandibular body length, gonial angle, and ramus height of the left hemiface. From the three-dimensional morphometry of each skull type, nine local area measurements and three total sum area measurements(representing the mandibular area, maxillary area, and lower facial area) were acquired and made into the surface area asymmetry degree. Menton deviation itself was used as the surface area asymmetry degree while right-left percentages were used in the other measurements. These surface area asymmetry degrees were compared with each other to find out asymmetry change according to the degree of actual facial asymmetry. Through the statistical analysis, following results were obtained. The results were as follows: 1. Left maxillary area of artificial human skull was 7.13$\pm$0.26% larger while mandibular area was 4.14$\pm$0.12% smaller than each those of right hemiface. After all, left lower facial area was 1.44$\pm$0.07% larger than those of right hemiface.(n=7). 2. Among the reduce rates of surface area asymmetry degree resulted from enlarging three local regions, ramus height was similar to mandibular body length while it was bigger than those of gonial angle. 3. Among the increase rates of menton deviation resulted from enlarging the local regions, ramus height was the biggest, mandibular body length was the second and gonial angle was the smallest. These results suggest that three-dimensional morphometry can be used to qualitatively analyse facial asymmetry and the asymmetry degree is more influenced by enlarging the ramus height, mandibular body length than those of gonial angle.

• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.195-201
• /
• 2016

The purpose of this study is to find out key factors of successful urban regeneration based on previous studies and relationships between those factors and revisit intention. To draw a conclusion, this study makes surveys including the variables of success factor(External environment factors, Internal environment factors, Internal cultural factors), degree of satisfaction, and degree of revisit intention. And it collects the data from respondents who had been to Gamcheon culture village in Busan. The data is analyzed by applying an exploratory factor analysis and a confirmatory factor analysis. The result of these analysis describes that the Internal environment factors and Internal cultural factors affect the satisfaction degree positively and the degree of satisfaction has positive effects on the revisit intention. The study finds out that unique resource properties should be considered when underdeveloped cities are regenerated. Future study is to generalize the theory through the sampling covered the whole country.

• International Commerce and Information Review
• /
• v.14 no.2
• /
• pp.3-27
• /
• 2012

As Chinese political and economical status gets higher, a lot of multinational firms have tried to find some chances from the Chinese market successfully. Though geographically Korea is located closely to China, a lot of firms entering into Chinese market have turned out failed. Thus, this study researched Korean manufacturing firms in China, surveyed their localization degree of distribution, and tried to find out factors which influence these localization from a far-reaching literature. As a result of analyzing 146 questionnaires, the length of channel, among Chinese environmental factors, has a positive influence on the distribution localization degree. In addition, the factor of distribution relation assets has a positive effect on the distribution localization degree. Considering this study, the Chinese market, especially distribution field, has recently grown up to the world-class level. Therefore a firm intending to enter into China needs to be careful not to underestimate China.

• Journal of the Korean Society of Food Culture
• /
• v.34 no.3
• /
• pp.316-324
• /
• 2019

The purpose of this study was to investigate dietary behavior and nutritional knowledge related to sodium intake in high school students. A questionnaire survey was conducted in 400 high school students (200 boys) in Incheon, Korea. Survey data were analyzed according to gender and degree of obesity. The distribution of the degree of obesity was the highest in 231 normal weight individuals (57.8%), followed by 89 underweight (22.3%), 41 overweight (10.3%), and 39 obese (9.8%). The sodium-related undesirable dietary behavior score was 2.9 points out of 5 points. The detailed dietary behavior scores of 'I eat kimchi when I eat instant noodles or noodles' and 'I like dried fish with salt' were significantly higher in boys than in girls (p<0.05). It was found that boys consumed more frequently high sodium foods, such as pizza, hamburger, and hotdog than girls. According to the degree of obesity, the underweight group consumed more kimchi fried rice and potato chips frequently than the other groups (p<0.05). Preference for salty taste was not significantly different among the groups by gender and degree of obesity. Sodium-related nutritional knowledge score was 5.3 points out of 10 and which was significantly higher in girls or normal weight group than in boys or obesity group. These results suggest that nutritional education on sodium intake is needed because the nutritional knowledge of adolescents is relatively low. Moreover, intensive nutritional guidance is required, especially in boys or adolescents with undesirable degree of obesity.

• Journal of Korea Foundry Society
• /
• v.3 no.3
• /
• pp.159-166
• /
• 1983

In order to develope domestic carburizers, the experiment was carried out by applying crystallization heat treatment to domestic anthracites and also to foreign products to compare with domestic anthracites.The present work was mainly concerned with the effect of their degree of crystallization of carbon-bearing materials on carbon pick-up in molten iron.Those effects were evaluated by the measurement of density, chemical composition, specific electric resistivity, and X-ray intensity of carbon-bearing materials. Experimental results thus obtained were summurized as follows. 1. The degree of crystallization of domestic anthracites and foreign products was increased with increasing heat treatment temperature. 2. The more degree of crystallization, the shorter the dissolving time of domestic anthracites in molten iron was obtained, while that of foreign products was remained constant. 3. As the degree of crystallization of domestic anthracites and foreign products was increased, the carbon content as well as carbon recovery in molten iron was increased.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.13-21
• /
• 2012

This study was carried out to evaluate the stability of archival documents produced using papers. The properties of archival documents depend on the type of fillers of papers that are used such as fiber, non cellulose fiber, and mineral. The physio-chemical characteristics of archival documents were analyzed by employing acid hydrolysis against cellulose fiber substances. Fibers of Korean hand-made (Hanji), flex, and cotten papers showed higher pH and the degree of polymerization (DP) than wood fiber and mechanical fiber. Mechanical pulp containing 12.8% of lignin showed the greatest decrease of DP due to acid hydrolysis, and this resulted in increase of degree of aging. The filler found to clay and talc did not contain metal such as $Fe^{+2}$, $Fe^{+3}$, and $Cu^{+2}$. The alkaline metals such as Mg, Ca, and Ti showed greater resistance to acid hydrolysis.

• The Pure and Applied Mathematics
• /
• v.27 no.4
• /
• pp.251-267
• /
• 2020

We classify all semigroups each of which arises as a Weierstrass semigroup at a pair of non-Weierstrass points on a smooth plane curve of degree 5. First we find the candidates of semigroups by computing the dimensions of linear series on the curve. Then, by constructing examples of smooth plane curves of degree 5, we prove that each of the candidates is actually a Weierstrass semigroup at some pair of points on the curve. We need to study the systems of quadratic curves, which cut out the canonical series on the plane curve of degree 5.

• Bulletin of the Korean Mathematical Society
• /
• v.48 no.2
• /
• pp.377-386
• /
• 2011

For a smooth algebraic curve C of genus g $\geq$ 4, let $SU_C$(r, d) be the moduli space of semistable bundles of rank r $\geq$ 2 over C with fixed determinant of degree d. When (r,d) = 1, it is known that $SU_C$(r, d) is a smooth Fano variety of Picard number 1, whose rational curves passing through a general point have degree $\geq$ r with respect to the ampl generator of Pic($SU_C$(r, d)). In this paper, we study the locus swept out by the rational curves on $SU_C$(r, d) of degree < r. As a by-product, we present another proof of Torelli theorem on $SU_C$(r, d).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.190-197
• /
• 2002

A new design methodology is presented for the multi-degree-of-freedom vibration absorber for an elastically suspended rigid body with planes of symmetry in general motion. Unlike the common single degree-of-freedom vibration absorber, the presented methodology makes use of both linear and rotational properties of the absorber. It is suggested that an absorber is designed separately for the in-plane and out-of-plane vibration modes and thereby combined the two cases for a six-degree-of-freedom absorber. The nine possible design methods are suggested for the six-degree-of-freedom absorber when an elastically suspended rigid body has one, two, or three planes of symmetry.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.7
• /
• pp.47-52
• /
• 2016

This paper introduces an algorithm to construct an Eulerian cycle for Chinese postman problem. The Eulerian cycle is formed only when all vertices in the graph have an even degree. Among available algorithms to the Eulerian cycle problem, Edmonds-Johnson's stands out as the most efficient of its kind. This algorithm constructs a complete graph composed of shortest path between odd-degree vertices and derives the Eulerian cycle through minimum-weight complete matching method, thus running in $O({\mid}V{\mid}^3)$. On the contrary, the algorithm proposed in this paper selects minimum weight edge from edges incidental to each vertex and derives the minimum spanning tree (MST) so as to finally obtain the shortest-path edge of odd-degree vertices. The algorithm not only runs in simple linear time complexity $O({\mid}V{\mid}log{\mid}V{\mid})$ but also obtains the optimal Eulerian cycle, as the implementation results on 4 different graphs concur.