• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.4
• /
• pp.430-435
• /
• 2000

Cleft lip and palate is one of the congenital anomalies which need comprehensive and multidisciplinary treatment plan because 1) oral cavity is an important organ with masticatory function as a start of digestive tract, 2) anatomic symmetry and balance is esthetically important in midfacial area, and 3) it is also important to prevent psycho-social problems by adequate restoration of normal facial appearance. There are many different protocols in the treatment of cleft lip and palate, but our department has adopted and modified the $Z{\"{u}}rich$ protocol, as published in the Journal of Korean Cleft Lip and Palate Association in 1998. The first challenge is feeding. Type of feeding aid ranges from simple obturators to active orthopedic appliances. In our department we use passive-type plate made up of soft and hard acrylic resin which permits normal maxillary growth. We use Millard's method to restore normal appearance and function of unilateral complete cleft lip. In consideration of both maxillary growth and phonetic problems, we first close soft palate at 18 months of age and delay the hard palate palatoplasty until 4 to 5 years of age. When soft palate is closed, posterior third of the hard palate is intentionally not denuded to allow normal maxillary growth. In hard palate palatoplasty the mucoperiosteum of affected site is not mobilized to permit residual growth of the maxilla. We have treated a patient with unilateral complete cleft lip and palate by Ajou protocol, which is a kind of modified $Z{\"{u}}rich$ protocol. It is as follows: Infantile orthopedics with passive-type plate such as Hotz plate, cheiloplasty with Millard's rotation-advancement flap, and two stage palatoplasty. It is followed by orthodontic treatment and secondary osteoplasty to augment cleft alveolus, orthognathic surgery, and finally rehabilitation with conventional prosthodontic treatment or implant installation. The result was good up to now, but we are later to investigate the final result with longitudinal follow-up study according to master plan by Ajou protocol.

• Journal of Trauma and Injury
• /
• v.29 no.4
• /
• pp.129-138
• /
• 2016

Purpose: Due to recent advances in internal fixation techniques, instrumentation and orthopedic implants there is an increasing number of humeral shaft fracture treated operatively. As a consequence, an increased number nonunion after operative fixation are being referred to our center. The aim of this study is to report the common error during osteosynthesis that may have led to nonunion and present a systematic analytical approach for the management of aseptic humeral shaft nonunion. Methods: In between January 2007 to December 2013, 20 patients with humeral shaft nonunion after operative procedure were treated according to our treatment algorithm. We could analysis x-rays of 12 patients from initial treatment to nonunion. In a subgroup of 12 patients the initial operative procedure were analyzed to determine the error that may have caused nonunion. The following questions were used to examine the cases: 1) Was the fracture biology preserved during the procedure? 2) Does the implant construct have enough stability to allow fracture healing? Results: In 19 out of 20 patients have showed radiographic evidence of union on follow up. One patient has to undergo reoperation because of the technical error with bone graft placement but eventually healed. There were 2 cases wherein the treatment algorithm was not followed. All patients had problems with mechanical stability, and in 13 patients had biologic problems. In the analysis of the initial operative fixation, only one of 12 patients had biologic problems. Conclusion: In our analysis, the common preventable error made during operative fixation of humeral shaft fracture is failure to provide adequate stability for bony union to occur. And with these cases we have demonstrated a systematic analytic management approach that may be used to prevent surgeons from reproducing the same fault and reduce the need for bone grafting.

• Archives of Plastic Surgery
• /
• v.38 no.1
• /
• pp.27-34
• /
• 2011

Purpose: Anterolateral thigh (ALT) perforator free flap is commonly used because of its various benefits. The author reports important factors of preoperative and perioperative ALT perforator free flap and causes of failure. Methods: 84 patients who were treated with ALT perforator free flap from December 2004 to 2008, and February 2010 to April 2010 were studied. 61 patients were male and 23 were female. The mean age of patients was 51.1. The main cause was neoplasm and the main reconstructive areas were head and neck area. The size of flap was various from $3{\times}4$ to $12{\times}18$ cm. 6 patients received split thickness skin graft at donor site. Preoperative angiography was checked to all patients. Results: Among the 84 patients, partial necrosis of flaps occurred in 4 patients because of atherosclerosis, varicose vein, or inattention of patient, etc. And total flap necrosis in 5 patients because of abnormal vessels of recipient area or delay of operation, etc. One case of serous cyst was found as the complication of donor area. Two cases of skin graft on donor site were done because of suspected muscle compartment syndrome, 4 cases of that because of large flap. Septocutaneous perforators were found in 7 cases. The author couldn't find reliable perforator in 3 cases, ipsilateral anteromedial thigh perforator and contralateral ALT perforator and latissimus dorsi musculocutaneous free flap were done instead of ALT. There was no case which needed reoperation because of the impairment of blood supply, and 3 cases were revised by leech because of the burn injury by a lamp or venous congestion. Conclusion: Although ALT perforator free flap is widely used with its various merits, many factors such as preoperative condition of donor or recipient area, morphology of defect and operating time need to consider to prevent flap necrosis. And operators should need careful technique because septocutaneous perforator is uncommon, and musculocutaneous perforator is common but difficult to dissect.

• Journal of Trauma and Injury
• /
• v.25 no.4
• /
• pp.254-260
• /
• 2012

Purpose: Ongoing treatment and care, as well as initial stabilization, are required for trauma patients. With increasing number of sickest trauma patients and shortage of surgeons, the need for advanced practice nurse to provide and coordinate trauma care has been greater. The purpose of this study is to analyze the effect of hiring a trauma clinical nurse specialist and its influence on the treatment of trauma patients. Methods: Based on the employment of the clinical nurse specialist in December 2010, the patients were divided into two groups: patients admitted from January 1, 2010 to November 30, 2010 and patients admitted from December 1, 2010 to December 31, 2011. Retrospectively, data were collected using electronic medical records. The general characteristics, clinical courses, and ICU re-admission rates, collaboration (transfers to other departments and collaborative surgery) were compared. Results: To have a clinical nurse specialist on the trauma team resulted in a statistically significant reductions in the length of general ward hospital stay (p<0.05), the ICU re-admission rate, (p<0.03), the lead-time before transfer to other departments (p<0.05). Conclusion: The clinical nurse specialist, as a professional practitioner, improved the quality of treatment through early detection and management of problems. In addition, as a coordinator, the clinical nurse specialist maintained a cooperative relationship with multi-disciplinary medical personnel. The trauma clinical nurse specialist contributed to the treatment of trauma patients positively through a decrease in ICU re-admission rate and length of hospital stay.

• Journal of Korean Foot and Ankle Society
• /
• v.21 no.2
• /
• pp.61-65
• /
• 2017

Purpose: The purpose of this study was to determine the correlation and ratio between the calcaneal length and width for predicting the width of calcaneus. Materials and Methods: A total of 190 feet (190 patients) were included based on computed tomography scans. The length of calcaneus (CL) was measured on the line connecting the center of a circle tangent to the cortical margin in the anterior and posterior parts of the calcaneus in a sagittal plane (W1, W2). The width of the calcaneus was defined as the horizontal line of each part (W1, W2, W3) on the same axial plane. The relationship between the measurement was determined through a correlation analysis. The reliability was assessed based on intraclass correlation coefficients. Results: The CL and widths of calcaneus (W1, W2, W3) had a good positive correlation (r=0.848 [W1/CL], r=0.738 [W2/CL], r=0.769 [W3/CL]; p<0.001). The mean CL and widths ratios were 0.33 (W1/CL), 0.37 (W2/CL), and 0.37 (W3/CL). Using these ratios to estimate the widths by multiplying each ratio by the measured calcaneal length, we found a difference between the estimated calcaneal widths and the actual measured calcaneal widths values was 0.25 mm, 0.43 mm, and 0.16 mm. All measurements showed good-to-excellent inter- and intraobserver reliability. Conclusion: This study analyzed the correlation and ratio between the length and width of the calcaneus. The results will help orthopedic surgeons fixate screws in a stable manner to prevent iatrogenic injuries to the medial neurovascular structures of the calcaneus.

• Journal of Trauma and Injury
• /
• v.36 no.4
• /
• pp.441-446
• /
• 2023

Inferior vena cava (IVC) injuries, while accounting for fewer than 0.5% of blunt abdominal trauma cases, are among the most difficult to manage. Despite advancements in prehospital care, transportation, operative techniques, and perioperative management, the mortality rate for IVC injuries has remained at 20% to 66% for several decades. Furthermore, 30% to 50% of patients with IVC injuries succumb during the prehospital phase. A 65-year-old male patient, who had been struck in the back by a 500-kg excavator shovel at a construction site, was transported to a regional trauma center. Injuries to the right side of the infrarenal IVC and the right external iliac vein (EIV) were suspected, along with fractures to the right iliac bone and sacrum. The injury to the right side of the infrarenal IVC wall was repaired, and the right internal iliac artery was ligated. However, persistent bleeding around the right EIV was observed, and we were unable to achieve proximal and distal control of the right EIV. Attempts at prolonged manual compression were unsuccessful. To decrease venous return, we ligated the right superficial femoral vein. This reduced the amount of bleeding, enabling us to secure the surgical field. We ultimately controlled the bleeding, and approximately 5 L of blood products were infused intraoperatively. A second-look operation was performed 2 days later, by which time most of the bleeding sites had ceased. Orthopedic surgeons then took over the operation, performing closed reduction and external fixation. Five days later, the patient underwent definitive fixation and was transferred for rehabilitation on postoperative day 22.

• Clinics in Shoulder and Elbow
• /
• v.13 no.2
• /
• pp.230-236
• /
• 2010

Purpose: We wanted to evaluate the result of percutaneous, mini-open reduction for the treatment of Mason II or III radial head and neck fractures. Materials and Methods: 13 patients (8 male, 5 female) with Mason II or III radial head and neck fractures were treated by 1 cm percutaneous mini-open reduction under fluoroscopy. The average age of our subjects was 29 years. Follow up duration was 18 months. Results: Union was noted in all cases. Mean radial neck angulation was decreased from 33.2 degrees to 7.8 degrees. The mean change in angulation between the immediate post-operative and last follow-up was 0.7 degrees. The mean range of motion at the elbow joint was at last follow up, 133.1 degrees in flexion, 7.3 degrees in extension, 80 degrees in pronation and 84.3 degrees in supination. Postoperatively, mean Mayo Elbow Performance Index, American Shoulder and Elbow Surgeons elbow score, and Disabilities of the Arm, Shoulder and Hand score were 96.2, 97 and 1.2. Temporary posterior interosseous nerve palsy (1 case) and minimal cubitus valgus deformity (1 case) were noted. Conclusion: Selected Mason II or III radial head and neck fractures can be treated satisfactorily with percutaneous mini-open reduction.

• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.39-46
• /
• 2018

The purpose of this study was to determine suitable angle of Tibia-foot and the X-ray tube for scaphoid in foot X-ray examination. A total of twenty patients(mean age $32.12{\pm}years)$ are participated in this study. In the positions of Foot AP, internal and external oblique, tibia-foot angle was defined as $90^{\circ}$ and $135^{\circ}$, and x-ray tube angle was defined as $0^{\circ}$, $5^{\circ}$, $10^{\circ}$, $15^{\circ}$ and $20^{\circ}$ respectively. The image quality was evaluated with blind test yielding scores ranging from 0 to 5 by the evaluation team consisted of 2 radiogical technologists, 2 radiologists, and 2 orthopedic surgeons. In case of Foot AP position, the degree of overlap between cuneiform and navicular was 3% and the blind test result was 4.89 at tibia-foot angle of $90^{\circ}$ and $15^{\circ}$ X-ray tube angle. When the tibia-foot angle is $135^{\circ}$, the degree of overlap was 5%, also the blind test result was 4.30 at $15^{\circ}$ X-ray tube angle. The degree of overlap and blind test result were 30% and 3.75 respectively at $0^{\circ}$ X-ray tube angle. In case of internal oblique position, at tibia-foot angle of $90^{\circ}$ and $0^{\circ}$ X-ray tube angle, the degree of overlap was 4% and the blind test result was 4.70. The 5% overlapping and highest score as 4.55 were obtained on tibia-foot angle of $135^{\circ}$ and $0^{\circ}$ X-ray tube angle. In case of external oblique position, at tibia-foot angle of $90^{\circ}$ and $15^{\circ}$ X-ray tube angle, the degree of overlap was 4% and the blind test score was 4.85. The 5% overlapping and highest score as 4.75 were obtained on tibia-foot angle of $135^{\circ}$ and $15^{\circ}$ X-ray tube angle. In conclusion, we confirmed suitable angle of tibia-foot and X-ray tube for scaph46oid in foot X-ray examination in this study. These findings will be helpful for us to reading for navicular fracture.

• Journal of agricultural medicine and community health
• /
• v.46 no.1
• /
• pp.12-22
• /
• 2021

Backgrounds: Proper distribution and supply of physicians are factors that affect national health care systems. This study investigated the payment distribution levels and the determinants that influence the salary levels of hospital hired physicians. Methods: We analyzed 4,014 job advertisements posted on an internet invitation information site about physician recruitment from May 2016 to May 2019. We used univariate analysis to determine the relationship between average monthly salary and the other related variables. Multiple regression analysis was used to determine the predictors of physician salary level. Results: The average monthly salary for the service physician was 15.4 million won, highest for orthopedic surgeons with 22.24 million won, and lowest for diagnostic laboratory physician with 11.4 million won. The factors significantly associated with average monthly salary were; non-major specialty, housing provision, no severance pay, and incentives(p<0.05). Non-major specialty, incentives, and the regions were predictors of the average standardized monthly salary(p<0.05). Conclusion: Factors associated with average monthly salary as revealed by this study were; medical specialty, hospital regional location, housing provision, payment of retirement allowance, and payment of other incentives respectively. However, this study was a cross-sectional study, and further studies will be required.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.10
• /
• pp.1210-1219
• /
• 2001

Introduction : The purpose of this study was to analyze the safety, pullout strength and radiographic characteristics of unicortical and bicortical screws of cervical facet within cadaveric specimens and evaluate the influence of level of training on the positioning of these screws. Methods : Twenty-one cadavers, mean 78.9 years of age, underwent bilateral placement of 3.5mm AO lateral mass screw from C3-C6(n=168) using a slight variation of the Magerl technique. Intraoperative imaging was not used. The right side(unicortical) utilized only 14mm screws(effective length of 11mm) while on the left side to determine the length of the screw after the ventral cortex had been drilled. Three spine surgeons(attending, fellow, chief resident) with varying levels of spine training performed the procedure on seven cadavers each. All spines were harvested and lateral radiographs were taken. Individual cervical vertebrae were carefully dissected and then axial radiographs were taken. The screws were evaluated clinically and radiographically for their safety. Screws were graded clinically for their safety with respect to the spinal cord, facet joint, nerve root and vertebral artery. The grades consisted of the following categories : "satisfactory", "at risk" and "direct injury". Each screw was also graded according to its zone placement. Screw position was quantified by measuring a sagittal angle from the lateral radiograph and an axial angle from the axial radiograph. Pull-out force was determined for all screws using a material testing machine. Results : Dissection revealed that fifteen screws on the left side actually had only unicortical and not bicortical purchase as intended. The majority of screws(92.8%) were satisfactory in terms of safety. There were no injuries to the spinal cord. On the right side(unicortical), 98.9% of the screws were "satisfactory" and on the left side(bicortical) 68.1% were "satisfactory". There was a 5.8% incidence of direct arterial injury and a 17.4% incidence of direct nerve root injury with the bicortical screws. There were no "direct injuries" with the unicortical screws for the nerve root or vertebral artery. The unicortical screws had a 21.4% incidence of direct injury of the facet joint, while the bicortical screws had a 21.7% incidence. The majority of "direct injury" of bicortical screws were placed by the surgeon with the least experience. The performance of the resident surgeon was significantly different from the attending or fellow(p<0.05) in terms of safety of the nerve root and vertebral artery. The attending's performance was significantly better than the resident or fellow(p<0.05) in terms of safety of the facet joint. There was no relationship between the safety of a screw and its zone placement. The axial deviation angle measured $23.5{\pm}6.6$ degrees and $19.8{\pm}7.9$ degrees for the unicortical and bicortical screws, respectively. The resident surgeon had a significantly lower angle than the attending or fellow(p<0.05). The sagittal angle measured $66.3{\pm}7.0$ degrees and $62.3{\pm}7.9$ degrees for the unicortical and bicortical screws, respectively. The attending had a significantly lower sagittal angle than the fellow or resident(p<0.05). Thirty-three screws that entered the facet joint were tested for pull-out strength but excluded from the data because they were not lateral mass screws per-se and had deviated substantially from the intended final trajectory. The mean pull-out force for all screws was $542.9{\pm}296.6N$. There was no statistically significant difference between the pull-out force for unicortical($519.9{\pm}286.9N$) and bicortical($565.2{\pm}306N$) screws. There was no significant difference in pull-out strengths with respect to zone placement. Conclusion : It is our belief that the risk associated with bicortical purchase mandates formal spine training if it is to be done safely and accurately. Unicortical screws are safer regardless of level of training. It is apparent that 14mm lateral mass screws placed in a supero-lateral trajectory in the adult cervical spine provide an equivalent strength with a much lower risk of injury than the longer bicortical screws placed in a similar orientation.