• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.2
• /
• pp.117-125
• /
• 2004

This paper describes the orthometric correction for determining the orthometric height obtained from height difference by precise leveling or GPS leveling. Five formulas are used to calculate the orthometric correction for two level lines as an examples. Based on the comparison results Strang van Hees' formula that use the surface gravity is better than the others to compute the orthometric corrections on spirit leveling and GPS/Leveling in an area where mean hight is high and terrain relief show high variability. Further research is necessary to improve the results of this study using Mader method, etc..

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.39-42
• /
• 2010

This Study describes the mountainous area which is located in Gyeongsangbuk-do and Jeollanam-do used the relative gravimeter in the object and is measured and the gravity data which used orthometric correction, is a physical height the altitude in compliance with the level measurement which is an altitude and a geometric height is really a difference in compliance with the method which is various calculated orthometric height. In addition, calculated by various were compared & analyzed by orthometric correction against the objective area to determine the appropriate orthometric correction method of calculation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.3
• /
• pp.319-325
• /
• 2011

It has been used not orthometric height but normal orthometric height for the official height in Korean benchmark because it has been used not observed gravity but normal gravity for the computation of orthometric correction. The purpose of this study is to propose height renewal method of Korean benchmark. For this purpose, we observed gravity by CG5 digital gravimeter in both the first benchmark line between Sokcho and Gangneung area and the second benchmark line between Soksa and Inje area. We calculated relative gravity value and orthometric correction in all benchmarks. So, the maximum orthometric correction shows -0.349mm in the first benchmark line, and the maximum orthometric correction shows -44.060mm in the second benchmark line. In conclusion, we can confirm that the orthometric correction based on observed gravity is necessary for more accurate official height computation in the Korean benchmark.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.2
• /
• pp.99-108
• /
• 2018

The purpose of this study is to determine the precise height in mountainous areas of South Korea and Jiri mountain area was selected as a test bed for the study. Gravity observation and GNSS surveying were performed for 44 BM(Benchmark) points in the test bed and calculate the height and the height correction. In the calculation, the dynamic correction amount, the orthometric correction amount and the normal correction amount were calculated, and the dynamic height and orthometric height and the normal height were calculated considering each correction amount. The results showed that the difference between normal gravity and observed gravity and also the difference between orthometric correction and the normal correction. In addition, the results of the comparison of the present official BM height and the computed orthometric height in this study show that Korean height system should be shifted from the normal orthometric height system to the orthometric height system. Because the difference between the orthometric correction and the normal correction within the test bed indicated a distribution of at a minimum of -234.41 mm up to 196.925 mm, and the difference between the present official BM height and the calculated orthometric height were distributed from -0.121m to 0.011 m.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.41-47
• /
• 2015

To determine the accurate height, it should be considered geometric height difference obtained by levelling as well as the physical height difference what so called orthometric correction. The orthometric correction amount is small enough to ignore at flatland but the amount is big at high mountains, so it should be considered to obtain accurate height at high mountains. But the calculation process is difficult and complex, not easy to calculate. So, to make the process easy using a user-friendly visual, a orthometric correction calculation program Ortho-Calc. v1.0 was developed in this study. This program was adopted the algorithm of Nassar and Hwang & Hsiao, and Strang Van Hees and it could be to selectivily calculate the correction amount. The inspection result exhibited high accuracy with the standard deviation of 0.024mm by the comparison of previous study. Therefore, This program Ortho-Calc. v1.0 developed in this study, will contribute orthometric correction calculation quickly and easily. And, if this program is widely popular, it could be expected to make a contribution the Benchmark's official height renewal using orthometric correction.

• Journal of the Korean earth science society
• /
• v.18 no.6
• /
• pp.522-528
• /
• 1997

Gravity surveys with accompanying spirit levelings were carried out in Mt. Hangye area. From these survey results, orthometric height correctioins were calculated. The correction reaches 5 cm when the height difference is 900 m in this area. The corrections were also calculated using an available Bouguer anomaly map, and they are little different from the previous results. In conclusion, orthometric height corrections are necessary in precise spirit leveling, specially in higher lands, and they can be easily calculated from an available Bouguer anomaly map without laborious gravity surveys.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.4
• /
• pp.299-307
• /
• 2007

This study is about the calculation of practical orthometric height for permanent GPS station. We presented the method to determine the orthometric height precisely by combining leveling data, GPS data and gravimetry data, and determined the orthometric heights of thirty GPS stations. To test the result we developed the expected error model fur the determined orthometric heights regarding the accuracy of Korean national benchmarks and the precision of surveying methods used at this project. The reliability of the results was presented by comparing it with expected error model statistically.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.4
• /
• pp.305-313
• /
• 2022

The evolution of the GNSS (Global Navigation Satellite System) technology has enhanced positioning performance in terms of positioning accuracy and time efficiency. The technology makes it possible to determine orthometric heights at a few centimeter accuracies by transforming accurate ellipsoid heights if an accurate geoid model has been employed. This study aims to generate a correction surface using GNSS/leveling co-points and a local geoid model, Thailand Geoid Model 2017 (TGM2017), through the Kriging interpolation method in a small local area. Combining the surface and TGM2017 significantly improves height transformation with the 1-cm RMSE (Root Mean Square Error) fit of 10 GNSS/leveling reference points and a mean offset of +0.1 cm. The evaluation of the correction surface at 5 GNSS/leveling checkpoints shows the RMSE of 1.0 cm, which is 82.6 percent of accuracy improvements. The GNSS leveling method can possibly be used to replace a conventional leveling technique at a few centimeter uncertainties in the case of small areas with clear-sky and high satellite visibility environments.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.35-45
• /
• 2010

The objective of this study is to verify the positional accuracy by performing the orthometric corrections on the high resolution satellite images and to analyze the band correlation between the high resolution images corrected with orthometric correction. The objectives also included an analysis on the correlation of NDVI. For the orthometric correction of images from KOMPSAT2 and IKONOS, systematic errors were removed in use of RPC data, and non-planar distortions were corrected with GPS surveying data. Also, by preempting the image points at the same positions within ortho images, a comparison was performed on positional accuracies between image points of each image and GPS surveying points. The comparison was also made on the positional accuracies of image points. between the images. For correlation of band and correlation of NDVI, the descriptive statistics of DN values were acquired for respective bands by adding the Quickbird images and Aerial Photographs undergone through orthometric correction at the time of purchase. As result, from a comparison on positional accuracies of Orthoimages from KOMPSAT2 and Ortho Images of IKONOS was made. From the comparison the distance between the image points within each image and GPS surveying points was identified as 3.41m for KOMPSAT2 and as 1.45m for IKONOS, presenting a difference of 1.96m. Whereas, RMSE between image points was identified as 1.88m. The level of correlation was measured by using Quickbird, KOMPSAT2, IKONOS and Aerial Photographs between inter-image bands and NDVI, showing that there were high levels of correlation between Quickbird and IKONOS identified from all bands as well as from NDVI, except a high level of correlation that was identified between the Aerial Photographs and KOMPSAT2 from Band 2. Low levels of correlation were also identified between Quickbird and Aerial Photographs from Band 1. and between KOMPSAT2 and IKONOS from Band 2 and Band 4, whereas, KOMPSAT2 showed low correlations with Aerial Photographs from Band 3. For NDVI, KOMPSAT2 showed low level of correlations with both of QuickBird and IKONOS.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.7 no.2
• /
• pp.1-6
• /
• 1989

The adjustment of levelling net is being done to the order of nets independently by using the least square method. For the small size net, it has difficulties in verification and statistical analysis of the net since the degree of freedom is low At the same time, it is also difficult to evaluate the error of lower order net correctly. The aim of this study is to analyse the properties of combined adjustment method compared with the independent adjustment method by using the data which have been measured during 1967-1987. Another aim is to analyse the influences of normal orthometric correction and changes of datum. Finally, Korean leveling net has been evaluated by applying real redundancy and variance component estimation.