• Elastomers and Composites
• /
• 제32권1호
• /
• pp.20-28
• /
• 1997

This study have Investigated the effect of various factors related to the physical properties of vulcanizated rubber compounds. rubber type, carbon black type and carbon black loading were selected as main factors and evaluation were tested by tables of orthogonal arrays with 3 factors and 3 levels. rubber types have affected cure time, tensile strength, and $T_g$ as main factor and carbon black loading have affected viscosity, scorch time, maximum torque, hardness, 300% modulus, rebound, heat build-up, $0\;&\;60^{\circ}C$ tangent delta, PICO and CUT/CHIP loss as main factor but the effects of carbon black type have affected only bound rubber content.

• 아동학회지
• /
• 제31권1호
• /
• pp.101-111
• /
• 2010

The purpose of this study was to develop a scale to measure the life satisfaction of after-school classes. For this purpose, utilizing the theoretical background and the findings of previous studies, 147 questions from eight factors were selected for the 1st draft and 67 questions were selected for the 2nd draft by reviewing the validity of the contents after consulting with eleven professionals. A preparatory survey and factor analysis was then conducted using 291 people and a total of 32 questions were extracted from four sub-factors. Exploratory factor analysis by principal component analysis was conducted and orthogonal rotation was conducted by means of the VARIMAX method. The reliability of the class environment, operation management, program and teacher relationship sector were found to be very high. It is suggested that this study can be of great benefit in developing a child-centered scale and it's reliability was also found to be high.

• Journal of Magnetics
• /
• 제17권4호
• /
• pp.275-279
• /
• 2012

The linear actuator has the inherent drawback of air gap variation because its linear motion is usually guided by the springs, which destabilizes the dynamic performance. In order to design the linear actuator to be insensitive to air gap, this paper describes the robust design of the air compressor driving linear actuator using Taguchi method. The orthogonal arrays are constructed with selected control factors and noise factor for minimum experiment. The control factors are thickness of inner magnet, height of upper yoke, thickness of outer magnet and thickness of lower yoke while noise factor is airgap. The finite element analysis using commercial electromagnetic analysis program "MAXWELL" are performed instead of experiment. ANOVA are performed to investigate the effects of design factors. In result, the optimal robust linear actuator which is insensitive to air gap variation is designed.

• 한국통신학회논문지
• /
• 제26권11B호
• /
• pp.1540-1545
• /
• 2001

This paper is concerned with the reverse link performance of multi-code CDMA systems in multipath fading environments. The degree of orthogonality loss among multiple spreading code channels is characterized as the orthogonality factor. It depends on various system parameters including multipath power profiles of propagation channels and the number of Paths resolved at a Rake receiver. The effect of the parameters on the system performance is then investigated in terms of bit error rate and required signal quality. The results show that multipath delay power profiles dominantly affect mutual interference among multi-code channels and multipath combining gain by bandwidth expansion is not so great due to the increase of the mutual interference. Moreover, the orthogonality factor is derived as the value of between (1/m) and 1.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.278-291
• /
• 1994

A computer-aided robust design (CARD) technique is developed to search for the design variables, optimal as well as robust in the sense of Taguchi method. The CARD technique can effectively handle inequality problems by employing the variable penalty method, and dynamic problems with many design variables and/or with mixed discrete and continuous variables. It is also capable of providing contributions of each design variables to the object funtion and information for future designs. As the illustrative examples, two dynamic systems, engine mounting system and in-line feeder, are treated.

• 대한기계학회논문집A
• /
• 제33권5호
• /
• pp.463-468
• /
• 2009

Torsional oscillations of the drivetrain in electric vehicles are generated under rapid driving conditions. These lead to an uncomfortable jerking of the vehicle and an increased stress of the mechanical components. To suppress torsional oscillations, the low pass and notch filters between the torque command from the acceleration pedal and electric motor input torque are suggested. The filter parameters are optimized based on Taguchi method with $L_{18}(3^5)$ orthogonal array. The signal to noise (S/N) ratio mainly depends on slew rate of motor input torque, damping ratio and natural frequency of notch filter. With the proposed suppression control scheme, the S/N ratio is shown to be increased by 4.7dB and the torque overshoot of the drive shaft is reduced to 30%.

• 한국정밀공학회지
• /
• 제27권7호
• /
• pp.101-108
• /
• 2010

Domestic three-way catalyst satisfies exhaust gas conversion efficiency or pressure drop etc. but doesn't satisfy thermal durability. Thermal stress analysis for three-way catalyst was performed based on experimental temperature distribution. Thermal safety of three-way catalyst was estimated by safety factor. Aspect ratio variable had the most significant effect on thermal stress. Thickness variable had the least significant effect on thermal stress. Optimal conditions for premature failure prevention of three-way catalyst were as follows : (1) aspect ratio of three-way catalyst : 0.6:1 (2) 2.84mm thick (3) silicon nitride. The safety of Taguchi-optimized three-way catalyst were 4.7 times higher than that of existent three-way catalyst.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.26-28
• /
• 2007

This research is concerned with a study of failure strength evaluation on heat element gap at resistance welding. The failure strength of resistance welded joint is changed by welding factor like as current(power level), welding time(total energy), pressure etc. and another heat element factor like as number of element line, element gap etc. Tensile-shear tests were carried out with the single-lap specimen using polypropylene(PP). The failure mechanism and optimization of gap was discussed in order to explain the tensile-shear strength evaluation on heat element gap at resistance welding. Orthogonal array was used by fractional factorial design for efficient experiments.

• 한국의상디자인학회지
• /
• 제9권1호
• /
• pp.161-171
• /
• 2007

The purpose of this study was to classify the lower body of the lost women and to investigate the three-dimensional characteristics of each lower body somatotype of them. The subject were ninety seven women whose. age were twenties and whose height and bust girth were in the range of mean$\pm1\delta$ of typical body size of twenties' Korean women. The forty one variables of their lower body were measured by Martin's Anthropometric Instrument. And they were analyzed for mean, standard deviations factor analysis, and cluster analysis. In the second phase of analysis, the three participants were re-selected in each type were measured by Sliding Guage and analyzed their lower body somatotype. The results were as follows; The components of lower body of 20s' women were extracted with 7 factors through factor analysis and orthogonal rotation by the method of Varimax. The rate of the cumulative contribution was 84.1% the first factor was the thickness of lower body, the second factor was the vertical size of lower body the third factor was the front shape of hip, the forth factor was the vertical size of hip, the fifth factor was the shape of abdomen, the six factor was the flat-ratio of waist and the seventh factor was flat-ratio of hip. The somatotype of 20's women's lower body can be classified into 3 types. Type 1 is the standard somatotype of 20's women's lower body and the 34.0% of the participants in the study was categorized into type 1. Type 2 is a short and corpulency type with protruded abdomen and hip and the 29.9% of the participants in the study was categorized into type 2. And the type 3 is a tall and thin type with plat abdomen and hip and the 37.1% of the participants was categorized into type 3.

• 한국의류학회지
• /
• 제20권1호
• /
• pp.170-182
• /
• 1996

The purpose of this study is to classify the upper body of women into several kind.; of somatotypes, using the method of Surgical Tape and making their shells. The subjects are 50 females 20 to 29 years-old. Fifty-one anthropometric data are measured per shell of body surface : eight somatotype factors are obtained through principal component analysis and orthogonal rotation by the method of Varimax, Somatotype of women's upper body is achieved by cluster analysis, using the standardized factor score a.: an independent variable and the FASTCLUS of SAS by Kmeans. The results are as follows : 1. The number of the factors which explain the somatotype is eight and these factors comprise 81.63 percent of total variance. Factor 1 related to the degree of fatness in the front of upper body Factor 2 related to the degree of fatness in the back of upper body Factor 3 . related to the length of the upper body Factor 4 : related to the type of the upper chest over the chest circmference line Factor 5 : related to the armhole and neck Factor 6 : related to the type of lower chest under the chest circumference line Factor 7: related to the part of the back shoulder Factor 8: related to the depth of front neck and side dart of front independently 2. Cluster analysis results in classification of upper body into five clusters. Cluster 1 : the of circumference i.: lager and that of length is longer than the average The louver part of chest is the lagest and widest among surface areas. Cluster 2 : the circumference is the smallest , the length and surface area are small. The upper and lower chest is small Cluster 3 : the length and surface area are the smallest , the circumference is average. The body line (silhouette) from chest to waist is curved slightly.