• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.6
• /
• pp.457-463
• /
• 2011

Introduction: This study evaluate the soft tissue changes to the upper lip and nose after Le Fort I maxillary posterosuperior rotational movement. Materials and Methods: Twenty Skeletal class III patients, who had undergone bimaxillary surgery with a maxillary Le Fort I osteotomy and bilateral sagittal split ramus osteotomy, were included in the study. The surgical plan for maxilla was posterosuperior rotational movement, with the rotation center in the anterior nasal spine (ANS) of maxilla. Soft and hard tissue changes were measured by evaluating the lateral cephalograms obtained prior to surgery and at least 6 months after surgery. For cephalometric analysis, four hard tissue landmarks ANS, posterior nasal spine [PNS], A point, U1 tip), and five soft tissue landmarks (pronasale [Pn], subnasale [Sn], A' Point, upper lip [UL], stomion superius [StmS]) were marked. A paired t test, Pearson's correlation analysis and linear regression analysis were used to evaluate the soft and hard tissue changes and assess the correlation. A P value <0.05 was considered significant. Results: The U1 tip moved $2.52{\pm}1.54$ mm posteriorly in the horizontal plane (P<0.05). Among the soft tissue landmarks, Pn moved $0.97{\pm}1.1$ mm downward (P<0.05), UL moved $1.98{\pm}1.58$ mm posteriorly (P<0.05) and $1.18{\pm}1.85$ mm inferiorly (P<0.05), and StmS moved $1.68{\pm}1.48$ mm posteriorly (P<0.05) and $1.06{\pm}1.29$ mm inferiorly (P<0.05). The ratios of horizontal soft tissue movement to the hard tissue were 1:0.47 for the A point and A' point, and 1:0.74 for the U1 tip and UL. Vertically, the movement ratio between the A point and A' point was 1:0.38, between U1 tip and UL was 1:0.83, and between U1 tip and StmS was 1:0.79. Conclusion: Posterosuperior rotational movement of the maxilla in Le Fort I osteotomy results in posterior and inferior movement of UL. In addition, nasolabial angle was increased. Nasal tip and base of the nose showed a tendency to move downward and showed significant horizontal movement. The soft tissue changes in the upper lip and nasal area are believed to be induced by posterior movement at the UL area.

• The korean journal of orthodontics
• /
• v.38 no.1
• /
• pp.41-51
• /
• 2008

Objective: The aim of this study was to compare the initial lateral cephalometric characteristics in two groups of patients: those that had mandibular setback surgery only and those that had mandibular setback surgery with advancement genioplasty. Methods: The lateral cephalograms of thirty-one patients were studied. Twenty-one Class III patients (group A) had only madibular setback surgery Twelve Class III patients (group B) had mandibular setback surgery with advancement genioplasty. Results: Differences between two groups were found in N-Me, ANS-Me, Occlusal Plane angle, Palatal Plane to U1, Mandibular Plane to L1, Mandibular Plane to L6, SN to U1, Sn-Stms, and Pog' projection. Compared to group A, group B showed more linguoversion and extrusion of upper incisors, more extrusion of lower incisors and lower first molar, and more steepness of the occlusal plane. N-Me, ANS-Me, and Sn-Stms were also longer in group B. But Pog' projection was shorter than group A. Conclusion: We conclude that certain initial lateral cephalometric characteristics may help indicate the inclusion of advancement genioplasty when mandibular setback surgery is planned in skeletal Class III patients.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.5
• /
• pp.524-529
• /
• 2007

Objective: Autologous transfusion is frequently used with orthognathic surgery. The necessity of autologous transfusion has begun to question alone in bilateral sagittal split ramus osteotomy. The aim of this study was to evaluate the availability of autologous transfusion. Methods: The chart reviews of sixty patients who had undergone bilateral sagittal ramus osteotomy were done. The subjects were divided into two groups: In experimental group, 30 patients who autodonated 320ml in the preoperative 3 weeks actually received a transfusion in the postoperative 6 hours were included. In control group, 30 patients who underwent the same operation without preoperative donation and any other transfusion were included. Hemoglobin, hematocrit, and changes of these values in both groups were evaluated. Results: 1. From postoperative 3 hours to postoperative 1 day, the increases of hemoglobin(0.8g/dL in experimental group, 0.2g/dL in control group) and hematocrit(0.3% in experimental group, 0.6% in control group) were not statistically significant between both groups. 2. From postoperative 1 day to postoperative 1 week, the increase of hemoglobin(0.6g/dL in experimental group, 0.3g/dL in control group) was not statistically significant between both groups. But the increase of hematocrit(2.5% in experimental group, 1.0% in control group) was statistically significant between both groups over the same period(hematocrit p=0.043). 3. On postoperative 1 week, the values of hemoglobin(12.3% in both groups) and hematocrit(35.6% in experimental group, 36.8% in control group) were not statistically significant between both groups. Conclusion: The autologous transfusion in surgery of just a little blood loss was not effective. The most results show that there is little availability of autologous transfusion according to changes of hemoglobin and hematocrit in bilateral sagittal split ramus osteotomy.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.239-249
• /
• 1999

In orthognathic surgery to obtain proper functional and esthetic form after skeletal discrepancy treatment, precise diagnosis and treatment plan are essential. Especially in two jaw surgeries that have serious upper and lower jaw problems, maxilla and mandible are arranged in three dimensions. Based on the maxillary rearrangement, mandibular sagittal and transverse positions are determined, and thus new occlusal plane is established. The object of this study is to evaluate the stability of the indiviual ideal occlusal plane based on the architectural and structural craniofacial analysis of Delaires. The subjects of this study were 48 patients who underwent two jaw surgeries, and they were equally divided into two groups, A and B. A group was operated with ideal occlusal plane and B group was not. Two groups were compared at the preoperative, immediate postoperative (average 4.3days), and long-term postoperative (average 1.3years) lateral cephalometric radiographs. The following results were obtained: 1. ANS was lower than that of PNS for both A and B after the surgery. That is, maxilla and mandible are rotated in posterior and superior direction. 2. Significances were found between $T_2$ and $T_3$ for both A and B are HRP-Me at vortical measurements, articular angle(p<0.01), gonial angle(p<0.01), and Mn. plane angle(p<0.05) at angular measurement. Mn. plane angle is increased at HRP-Me is decreased for both A and B. 3. There is no significance in skeletal stability aster the surgery between group A and B. 4. Horizontal movements of B and Pog by surgery have statistically significant inverse correlations with horizontal relapse of B and Pog, and vertical relapse of PNS, as well as Mn. Plane angle, and gonial angle after the surgery.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.643-655
• /
• 2000

In Patients with severe skeletal discrepancy, surgical orthodontic treatment must be accompanied, and recently two jaw surgery has become a common procedure, resulting in improved esthetics and function. Choosing the position of the occlusal plane in this two jaw surgery is an important factor in postoperative stability Therefore this must be taken into consideration during the diagnosis and treatment plan. In this study, among patients with skeletal Class III occlusion, 25 patients(8 male, 17 female, average age $23.2{\pm}3.17$) who have undergone two jaw surgery, setting the ideal occlusal plane according to Delaire's architectural and structural cranial analysis. In comparing preoperative($T_1$). postoperative($T_2$, average of 15.4 days), and long-term postoperative($T_3$, average of 32.6 months) lateral cephalometric radiography, the following conclusions have been made. 1. There were no significant changes of the occlusal plane angle after the two jaw surgery, and there were no significant differences between the surgical technique(SSRO and IVRO). 2. The postoperative changes of the occlusal Plane had no relationship with the amount of jaw movement, amount of posterior impaction, nor the time relapse after surgery. 3. After two jaw surgery, in the SSRO group there was significant forward movement of the mandible, and in the IVRO group the lower incisors extruded as the mandible moved backward and downward which makes the genial angle and the mandibular plane angle significantly increased

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.57.1-57.8
• /
• 2019

Background: The relationship between the lateral deviation of chin and the upper and middle facial third asymmetry is still controversial. The purpose of this study is to evaluate the correlation of upper and middle facial third asymmetry with lateral deviation of chin using 3-dimensional computed tomography. The study was conducted on patients who underwent orthognathic surgery from January 2016 to August 2017. A total of 40 patients were included in this retrospective study. A spiral scanner was used to obtain the 3-dimensional computed tomography scans. The landmarks were assigned on the reconstructed 3-dimensional images, and their locations were verified on the axial, midsagittal, and coronal slices. The Pearson correlation analysis was performed to evaluate the correlation between chin deviation and difference between the measurements of distances in paired craniofacial structures. Statistical analysis was performed at a significance level of 5%. Results: In mandible, the degree of chin deviation was correlated with the mandibular length and mandibular body length. Mandibular length and mandibular body length are shorter on the deviated-chin side compared to that on the non-deviated side (mandibular length, r = -0.897, p value < 0.001; mandibular body length, r = -0.318, p value = 0.045). In the upper and middle facial thirds, the degree of chin deviation was correlated with the vertical asymmetry of the glenoid fossa and zygonion. Glenoid fossa and zygonion are superior on the deviated-chin side than on the non-deviated side (glenoid fossa, r = 0.317, p value = 0.046; zygonion, r = 0.357, p value = 0.024). Conclusion: Lateral deviation of chin is correlated with upper and middle facial third asymmetry as well as lower facial third asymmetry. As a result, treatment planning in patients with chin deviation should involve a careful evaluation of the asymmetry of the upper and middle facial thirds to ensure complete patient satisfaction.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.6
• /
• pp.628-635
• /
• 2000

The purpose of this study was to evaluate the result after 2-phase surgical-orthodontic treatment without preoperative orthodontic treatment for the skeletal Cl III malocclusion patient and to obtain an adequate protocol on the bases of this result. This retrospective study of ten patients who underwent 2-phase treatment were done to evaluate 1) the surgical stability and relapse pattern 2) the facial esthetics 3) the TMJ problem 4) the total time of the treatment. Results were followed : 1) The horizontal relapse of the mandible was 26.8% and didn't show significant differences compared to the conventional 3-phase treatment. But, it was considered that this amount of relapse was the sum of true relapse and autoratation of mandible due to decreased vertical dimension during orthodontic treatment. 2) It was estimated that there's no difference on the ratio of anterior facial height between the subjects and the normal patients. On the horizontal analysis, the mandible of the subjects was located more anteriorly than that of the normal patients. This result showed that there was a need for the accurate preoperative esthetic evaluation and the additional methods for reducing the relapse due to the occlusal interference. 3) Wide variation was noted on the TMJ symptoms of the subjects, however, it was estimated that there's no significant differencees of symptoms compared to that of the conventional 3-phase treatment on literatures. 4) The average of the overall period of treatment was 20.8 months and we obtained reduction of the treatment time compaired to 3-phase treatment on many literatures. Most of the results of this study were similar to the findings of the 3-phase treatment(preoperative orthodontic-orthognathic surgery-postoperative orthodontic), but total time of the treatment was shorter in patients with 2-phase treatment than in those with the conventional 3-phase treatment. With 2-phase treatment, we experienced many advantages compared to the conventional method considering that it was favarable conditions for the teeth, it had the flexibility for the treatment, and it could be the adequate treatment approach for the stomatognathic system. Although this retrospective pilot study had some limitations, due to small samples, the authors would hope that it could serve as a guide for the future researches, and the clinical applications.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.43 no.2
• /
• pp.77-82
• /
• 2017

Objectives: The aim of this study was to compare the mechanical resistance of four different osteosyntheses modeled in two different sagittal split ramus osteotomy (SSRO) designs and to determine the linear loading in a universal testing machine. Materials and Methods: An in vitro experiment was conducted with 40 polyurethane hemimandibles. The samples were divided into two groups based on osteotomy design; Group I, right angles between osteotomies and Group II, no right angles between osteotomies. In each group, the hemimandibles were distributed into four subgroups according to the osteosynthesis method, using one 4-hole 2.0 mm conventional or locking plate, with or without one bicortical screw with a length of 12.0 mm (hybrid technique). Each subgroup contained five samples and was subjected to a linear loading test in a universal testing machine. Results: The peak load and peak displacement were compared for statistical significance using PASW Statistics 18.0 (IBM Co., USA). In general, there was no difference between the peak load and peak displacement related to osteotomy design. However, when the subgroups were compared, the osteotomy without right angles offered higher mechanical resistance when one conventional or locking 2.0 mm plate was used. One locking plate with one bicortical screw showed higher mechanical resistance ($162.72{\pm}42.55N$), and these results were statistically significantly compared to one conventional plate with monocortical screws (P=0.016) and one locking plate with monocortical screws (P=0.012). The difference in peak displacement was not statistically significant based on osteotomy design or internal fixation system configuration. Conclusion: The placement of one bicortical screw in the distal region promoted better stabilization of SSRO. The osteotomy design did not influence the mechanical behavior of SSRO when the hybrid technique was applied.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.20 no.3
• /
• pp.191-200
• /
• 1998

This study was intended to perform the influence of condyle positional change after surgical correction of skeletal Class III malocclusion after orthognathic surgery in 37 patients(male 13, female 24) using computed tomogram that were taken in centric occlusion before, immediate after, and long term after surgery and lateral cephalogram that were taken in centric occlusion before, 7 days within the period of intermaxillary fixation, at the 24 hours later removing intermaxillary fixation and long term after surgery. 1. Mean intercondylar distance was $84.42{\pm}5.30mm$ and horizontal long axis of condylar angle was $12.79{\pm}4.92^{\circ}$ on the right, $13.53{\pm}5.56^{\circ}$ on the left side. Condylar lateral poles were located about 12mm and medial poles about 7mm away from the reference line(AA') on the axial tomogram. Mean intercondylar distance was $83.15{\pm}4.62mm$ and vertical axis angle of condylar angle was $76.28{\pm}428^{\circ}$ on the right, $78.30{\pm}3.79^{\circ}$ on the left. 2. In amount of set back, We found the condylar change(T2C-T1C) which had increasing tendency in group III (amount of setback : 10-15mm). but there was no statistical significance(p>0.05). 3. There was some correlation between condylar change(T2C-T1C) and TMJ dysfunction. It seemed that postoperative condylar change had influenced postoperative TMJ dysfunction, through there was no statistical significance (p>0.05). As we have observed the change of condylar axis in the group that complained of TMJ dysfunction in cases of large amount of mandibular setback. So we consider that the more trying to conserve condylar position will decrease occurrence rate of post operational TMJ dysfunction.

• The korean journal of orthodontics
• /
• v.34 no.1 s.102
• /
• pp.93-107
• /
• 2004

Enlow's counterpart analysis explains the complex with anatomic and developmental characteristics where craniofacial aspect of Individuals has been developed. Counterpart analysis does not compare individual measurement with the normal value from the average of majority but analyzes by comparison of values that each individual has. In this study we examined surgical changes in skeletal Class III malocclusion patients(male 40, female 40) and compared them with normal occlusion patients using counterpart analysis. The results indicated that : 1. Skeletal anterior-posterior discrepancy was relieved by shortening of the ramus width(B3). 2. The ramus alignment(R3, R4) was displaced posteriorly and the occlusal plane angle(R5) was rotated clockwise. 3. Skeletal Class III pattern was relieved in the post-operative group, but differences in the level of the cranium(R1, R2) was remaining compared to the normal occlusion patients. 4. In the comparison of surgery methods, the two-jaw surgery group presented changes In the maxillary length(A4), ramus alignment(R3, R4) and occlusal plane angle(R5) compared to the one-jaw surgery group, but the differences were not significant. In the past study about Korean skeletal Class m patients, the skeletal characteristics are upward backward rotation of the cranial base, posterior displacement of the maxilla, forward inclination of the ramus and lengthening of the mandibular body, but in this study, skeletal Class m pattern was relieved by shortening of the ramus width and maxillary advancement by orthognathic surgery, because orthognathic surgery is usually performed on limited areas in the maxilla and the mandible.