• 대한기계학회논문집A
• /
• 제21권9호
• /
• pp.1422-1431
• /
• 1997

When the structures are exposed to their own an application for a long period, a number of variables such as strength properties and corrosion resistance, so on are expected to change. In the present investigation the corrosion behavior and resistance for the original and degraded materials of Ni-Cr-Mo-V steel were evaluated under the conditions of pH 3, 6, 9 and 12 in a distilled water environment. The electrochemical polarization technique was employed in this investigation. Based upon the experimental results obtained, the following conclusions were drawn. A severe and uniform corrosion was observed for both original and degraded materials under the condition of pH 3. At pH 6 and pH 9, these materials showed the degradation by a pitting corrosion. The materials under pH 12 environment were degraded by a uniform corrosion. The corrosion rate per year were the highest in the pH 3 environment, followed by pH 12, pH 6 and pH 9 environment in order. The corrosion resistance was decreased from the original material, slow cooled material (10.deg. C/hr) and step cooled material in order.

• 한국산학기술학회논문지
• /
• 제16권6호
• /
• pp.3667-3671
• /
• 2015

PCB(Printed circuit board) 장착을 주목적으로 하는 포밍공정에서 주름을 발생시키지 않으면서, 실험을 통하여 재료의 두께 변화를 고찰하였다. 실험결과 제 1공정의 포밍 높이는 제 2공정에서의 재료두께 변화에 크게 영향을 미치는 것으로 나타났으며, 제 1공정에서 다이의 입구 모서리는 제품높이 50%정도의 라운드를 가져야 하며, 포밍의 높이는 원래의 제품보다 재료의 두께만큼 높게 하여야 한다. 또한 제 1공정에서 포밍형상을 구현하면 재료의 두께가 85%로 얇아지고 제 2공정에서 리스트라이킹시 재료의 두께가 80%로 얇아진다. 그러므로 정확한 형상을 구현하기 위해서는 재료가 얇아지는 것을 고려하여 다이는 원제품의 형상을 유지하고 펀치는 원제품의 깊이에 재료 두께의 20%이상 더한 값만큼 길이를 길게 하여야 압축의 효과를 얻을 수 있다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2007년도 추계학술대회
• /
• pp.275-298
• /
• 2007

Recently, all kind of 21C-typed electronic goods show the tendency of hightechnology and digital convergence rapidly. Also, failure mechanism which differs from original goods concept presents. Today, failure mechanism which differs from one that was happened by restricted harmful environment material before adapted the raw of environment material is changing the paradigm of reliability engineering. Thus, when applied the environment matter of original and secondary material at the electronic goods were removed, reliability assessment method and prediction stay into low level. This study suggests as solution to overcome these phenomenon. The study on the management method of environmental restriction substances which is recognized as important element in the reliability assessment about environment material of electronic goods and the study on reliability assessment method of PWB without environment material are progressed.

• 대한안전경영과학회지
• /
• 제9권6호
• /
• pp.55-68
• /
• 2007

Recently, all kind of 21C-typed electronic goods show the tendency of hightechnology and digital convergence rapidly. Also, failure mechanism which differs from original goods concept presents. Today, failure mechanism which differs from one that was happened by restricted harmful environment material before adapted the raw of environment material is changing the paradigm of reliability engineering. Thus, when applied the environment matter of original and secondary material at the electronic goods were removed, reliability assessment method and prediction stay into low level. This study suggests as solution to overcome these phenomenon. The study on the management method of environmental restriction substances which is recognized as important element in the reliability assessment about environment material of electronic goods and the study on reliability assessment method of PWB without environment material are progressed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1088-1092
• /
• 2002

This paper introduces that domestic animals can be effectively administered with an individual recognition system. The system was constructed in original code transmitter, receiver, personal computer, micro-processor, and RS485 telecommunications module. In the individual recognition system. the signal including encoded information about a milk-cow was transmitted from an original code transmitter to a micro-processor through RS485 telecommunications module. The transmitted signal was successfully displayed in a personal computer.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2001년도 춘계학술대회논문집:21세기 신지식정보의 창출
• /
• pp.64-76
• /
• 2001

In this paper, A simple image hologram encryption and decryption technique based on the principle of interference are proposed. The technique using the photorefractive material for getting a stable interference pattern is also proposed. And combine these two techniques, I would like to implement a stable optical information security system. In the encrypting process, I would generate binary phase hologram which can reconstruct original image perfectly, and regard this hologram as original image to be encrypted image. And then the hologram is encrypted as randomly generated binary phase image. Reference image is also generated from the encrypted image by applying interference rule. In the decrypting process, I can get a interference intensity by interfering the reference image and the encrypted image in the interferometer. and transform inferference intensity information into phase information. I recover original image by inverse Fourier transforming the phase information. In this process, the intensity information generated by interference of two images is very sensitive to external vibrations. So, I would like to get a stable interference using the characteristic of SPPCM(self pumped phase conjugate mirror) in photorefractive materials, especially BaTiO₃.

• Steel and Composite Structures
• /
• 제25권6호
• /
• pp.735-745
• /
• 2017

This work presents a free vibration analysis of functionally graded plates by employing an original high order shear deformation theory (HSDT). This theory use only four unknowns, which is even less than the classical HSDT. The equations of motion for the dynamic analysis are determined via the Hamilton's principle. The original kinematic allows obtaining interesting equations of motion. These equations are solved analytically via Navier procedure. The accuracy of the proposed solution is checked by comparing it with other closed form solutions available in the literature.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2734-2741
• /
• 2023

Brachytherapy is a special case of radiotherapy. It should be arranged according to some principles in medical radiation applications and radiation physics. The primary principle is to use as low as reasonably achievable dose in all ionizing radiation applications for diagnostic and therapeutic treatments. Dosimetric distributions are dependent on radioactive source properties and radiation-matter interactions in an absorber medium such as phantom or tissue. In this consideration, the geometrical structure and material of the seed capsule, which surrounds a radioactive material, are directly responsible for isodose profiles and dosimetric functions. In this study, the radiometric properties of capsule material were investigated on dose distribution in a water phantom by changing its nuclear properties using the EGSnrc Monte Carlo (MC) simulation code. Effective atomic numbers of hypothetic mixtures were calculated by using different elements with several fractions for capsule material. Model 6711 brachytherapy seed was modeled by EGSnrc/Dosrcnrc Code and dosimetric functions were calculated. As a result, dosimetric parameters of hypothetic sources have been acquired in large-scale atomic number. Dosimetric deviations between the data of hypothetic seeds and the original one were analyzed. Unit dose (Gy/Particle) distributions belonging to different types of material in seed capsule have remarkably differed from the original capsule's data. Capsule type is major variable to manage the expected dose profile and isodose distribution around a seed. This study shows us systematically varied scale of material type (cross section or effective atomic number dependent) offers selective material usage in production of seed capsules for the expected isodose profile of a specific source.

• 한국안전학회지
• /
• 제26권5호
• /
• pp.110-117
• /
• 2011

The paper tries to understand the other side of characteristics on occupational injuries and diseases in forestry. Occupational injuries and diseases in forestry seems to be greatly influenced by the environmental characteristics of the mountain district and individual's ability of workers. A traditional method on the analysis of occupational injuries and diseases data may show that the main cause of occupational injuries and diseases is the material factors significantly. To identify the other side of occupational injuries and diseases in forestry, the occupational injuries and diseases data of 3,091 workers in forestry was analyzed. The data in forestry, 2009 shows certain characteristics among the recent occupational injuries and diseases data. The first step is to classify the data according to standard of classification of original cause materials. Material factors are 72.3% and human factors (included managerial factors) and environmental factors are 27.0%. The next step is to reclassify the first step data by using the concept of influence factors which caused and influenced occupational injuries and diseases. The result is that material factors are 2.4%, human factors(included managerial factors) and environmental factors are 97.0%. Also, an aging degree of workers in forestry is higher than other categories of business. It is true that an aging degree of injured or diseased workers in forestry is higher than that of other categories of business. However, relevance with increase of occupational injuries and diseases could not be explained. An injury and disease rate in forestry is remarkably increased recently than other categories of business. One of the reason why an injury and disease rate increased remarkably in 2009 could be considered as the increase of the number of workers and related budget. Therefore, this study proposes important measures or means to prevent occupational injuries and diseases in forestry.

• 한국농촌건축학회논문집
• /
• 제12권4호
• /
• pp.1-11
• /
• 2010

This study is a research examining reshaped pattern in the perspective of repairing parts and materials through repairing renovation of registered cultural properties constructed in modern times and results are as followings. Repairing construction of registered cultural properties of Jollanamdo according to parts is shown numerously in the order of roof, walls and windows, and mostly outworn as time passes on and leakage were the main cause of repair. Also when original shape was damaged by previous repair in the past, and this was another reason of repairing. It was surveyed that among the repairing job repair of damage occurred on the part of roofing area including water leakage, corrosion and damage of roofing material, and damage of groove channel were the most main cause of repair. Especially when roof leakage is occurred by outworn of roofing materials, this cause corrosion and damage of materials due to the damage of leakage parts and this cause repeating cycles of worse leakage again and again. Main repairing materials which deform the original shape of registered cultural properties were confirmed as copper plate used on the roof. Copper plate showing high frequency of application which replaces groove slate or cement roofing tile used on the roof before has high durability and anti-corrosion but it is considered improper material to recover original shape.