• Structural Engineering and Mechanics
• /
• 제67권4호
• /
• pp.403-415
• /
• 2018

In the present study, nonlinear dynamic response of polymer-CNT-fiber multiscale nanocomposite plate resting on elastic foundations in thermal environments using the finite element method is performed. In this regard, the governing equations are derived based on Inverse Hyperbolic Shear Deformation Theory and von $K{\acute{a}}rm{\acute{a}}n$ geometrical nonlinearity. Three type of distribution of temperature through the thickness of the plate namely, uniform linear and nonlinear are considered. The considered element is C1-continuous with 15 DOF at each node. The effective material properties of the multiscale composite are calculated using Halpin-Tsai equations and fiber micromechanics in hierarchy. The carbon nanotubes are assumed to be uniformly distributed and randomly oriented through the epoxy resin matrix. Five types of impulsive loads are considered, namely the step, sudden, triangular, half-sine and exponential pulses. After examining the validity of the present work, the effects of the weight percentage of SWCNTs and MWCNTs, nanotube aspect ratio, volume fraction of fibers, plate aspect, temperature, elastic foundation parameters, distribution of temperature and shape of impulsive load on nonlinear dynamic response of CNT reinforced multi-phase laminated composite plate are studied in details.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1987년도 학술발표초록집
• /
• pp.11-11
• /
• 1987

Among other poly(4,4'-terephthanilidealkylamide)s (PTAA's), poly (4,4'-terephthanilideadipamide) (PTAd) gave clear critical concentration curves. For PTAA's with methylene units more than 6, the critical concentration (C*) seemed to be beyond the solubility limit of H₂SO₄. Under shearing conditions, the nematic domains were easily oriented and stretched in the direction of shear , and a fibrillar structure resulted. At low frequencies, a monotollous reduction of loss tangent (tan) was observed as concentration increased. At high frequencies, however, tan was increased above C* again, and showed maximum at saturation concentration (Cs). With increasing temperature, viscosity of isotropic and anisotropic phases was normally decreased, while viscosity of biphases was increased. Plot of complex viscosity (If) against temperature based on rheological measurements exhibited a good correlation with phase diagram constructed by polarizing microscope observations. Rheological parameters suggested the optimum dope concentration of PTAd with inherent viscosity 2.02 at 30oc is in the vicinity of 19.2 wt%, which seemed to agree well with spinning experiments (around 19.4 wt%). In general, effects of spinning and annealing conditions on the mechanical properties of PTAA fibres were most pronounced in PTAd fibre spun from anisotropic spinning dope .

• 폴리머
• /
• 제30권6호
• /
• pp.563-567
• /
• 2006

생체 적합성이 우수한 gelatin(GEL)과 기계적 물성이 뛰어난 poly(vinyl alcohol)(PVA)로 이루어진 블렌드막을 $3{\sim}10kV$의 고전장하에서 용액 캐스팅 법에 의해 제조하였고, 막중에 형성되는 미세한 domain 구조의 배향에 미치는 전장의 효과를 조사하였다. 5 kV이상의 높은 전장하에서 제조된 막의 경우 SEM 사진으로부터 막중의 GEL domain이 전장인가 방향으로 배향되어 있음을 관찰하였다. 이는 제막 중 상분리된 두 상의 계면장력 감소에 기인한 Maxwell의 정전 분산 효과에 의한 것으로 해석될 수 있다. 또한, 고전장 인가시 전극 판에서 발생하는 열과 GEL domain의 연신 배향 효과에 의해 PVA/GEL 블렌드막의 결정화도가 증가하는 것을 WAXD와 팽윤거동 관찰을 통해 확인 할 수 있었다.

• Advances in materials Research
• /
• 제4권2호
• /
• pp.113-132
• /
• 2015

The phenomena of high-voltage polarization and conductivity in oriented vinylidenefluoride and tetrafluoroethylene copolymer films have been investigated. It was shown that under certain electric fields, injection of carriers from the material of electrodes appears The barrier for holes injection in the copolymer was found to be lower than that for electrons. It results in more effective screening of the external field near the anode than near cathode. Electrones, ejected from cathode, creating negative charge by trapping on the surface. It is shown that the electrons injected from cathodes create a negative homocharge on the copolymer surface and then become captured on the surface shallow traps. Their nature has been studied by the x-ray photoelectron spectroscopy. It was shown that these traps may consist of chemical defects in the form of new functional groups formed by reactions of surface macromolecules with sputtered atoms of aluminum. The asymmetric shape of hysteresis curves was explained by the difference in mobility of injected holes and electrons. These factors caused appearance of "non-closed" hysteresis curves for fluorine-containing polymer ferroelectrics. Hysteresis phenomena observed at low electric fields (below coercive ones) are to associate with the behavior of the domains localized in the ordered regions formed during secondary crystallization of copolymers.

• 패션비즈니스
• /
• 제12권1호
• /
• pp.120-128
• /
• 2008

Rayon fiber as clothing material has silk-like property which relates to other synthetic fibers. It has many advantages that is required to women's clothes. However rayon has many shortcomings. Therefore this research is to spin rayon-like polyester which has high contraction property to be synthesized by previous research to solve those shortcomings and to maintain advantages of rayon. The contraction ratio of regular polyester is 30% and the contraction ratio of this synthesized polyester is over 60%. The spinning temperature of regular polyester ranges from $285^{\circ}C$ to $300^{\circ}C$. However, this copolymer is set range from $270^{\circ}C$ to $290^{\circ}C$, which is $10^{\circ}C$ less than regular polyester due to decreasing melting temperature. The spinning velocity effects the tensile strength and elongation of yarn magnificently. The high velocity of spinning makes yarn highly oriented, increases the tensile strength and decreases the elongation. This research defines the condition as following; draw ratio 2.734, First roller temperature $85^{\circ}C$, Slit heater temperature $175^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• 제11권1호
• /
• pp.11-15
• /
• 1990

The temperature dependence of electrical conductivities and thermoelectric power of $I_2$-doped poly(1,4-penylene vinylene-co-2,5-dimethoxy-1,4-phenylene vinylene)s [poly(PV-co-DMPV)] and poly(1,4-phenylene vinylene-co-2,5-thienylene vinylene)s [poly(PV-co-TV)] were studied. The former copolymers were also doped with $FeCl_3$. All the samples used were in thin film forms. The temperature dependence of electrical conductivity implies that the variable range hopping conduction mechanism applises to these systems. The activation energy for the electrical conduction in dimethoxy-phenylene vinylene (DMPV) copolymers ranged from about 7 to 30 meV depending on the polymer composition and the nature of the dopant. It was significantly higher for $I_2$-doped thienylene vinylene (TV) copolymers, namely 90-200 meV. The values of the room temperature thermoelectric power were $30-70{\mu}V/K$ for DMPV copolymer and $100-800{\mu}V/K$ for TV copolymers. Anisotropy in the electrical conductivities was also studied for oriented films obtained by uniaxial stretching of the precursor polymer films.

• Structural Engineering and Mechanics
• /
• 제57권1호
• /
• pp.105-126
• /
• 2016

In the present study, modelling and vibration control of axially moving laminated Carbon nanotubes/fiber/polymer composite (CNTFPC) plate under initial tension are investigated. Orthotropic visco-Pasternak foundation is developed to consider the influences of orthotropy angle, damping coefficient, normal and shear modulus. The governing equations of the laminated CNTFPC plates are derived based on new form of first-order shear deformation plate theory (FSDT) which is simpler than the conventional one due to reducing the number of unknowns and governing equations, and significantly, it does not require a shear correction factor. Halpin-Tsai model is utilized to evaluate the material properties of two-phase composite consist of uniformly distributed and randomly oriented CNTs through the epoxy resin matrix. Afterwards, the structural properties of CNT reinforced polymer matrix which is assumed as a new matrix and then reinforced with E-Glass fiber are calculated by fiber micromechanics approach. Employing Hamilton's principle, the equations of motion are obtained and solved by Hybrid analytical numerical method. Results indicate that the critical speed of moving laminated CNTFPC plate can be improved by adding appropriate values of CNTs. These findings can be used in design and manufacturing of marine vessels and aircrafts.

• 융복합기술연구소 논문집
• /
• 제12권1호
• /
• pp.13-18
• /
• 2022

Polyacrylonitrile was synthesized through suspension polymerization and then sieved to obtain spherical beads with a size of 200~510 ㎛. PAN was copolymerized with 2 mol% MMA monomer which is known to promote cyclization and crosslinking of nitrile group. The resonance cyclization reaction of the nitrile group in the synthesized PAN beads was observed near 170℃ with thermal analysis and FT-IR. The reaction conversion of the nitrile group in spherical beads was 23% during heat treatment, which was lower than that of the well-oriented PAN fiber used as a precursor of carbon fiber. This is because the stereo-regularity of molecular chains in the form of a random coil (spherical bead) is much lower than that of PAN fiber. It was confirmed that the compressive strength of the spherical PAN bead was greatly improved through the resonance cyclization and shrinkage according to the heat treatment, and it was also observed that the pores in PAN beads were formed after the heat treatment.

• 폴리머
• /
• 제29권4호
• /
• pp.413-417
• /
• 2005

LCD 배향막으로 응용하기 위하여 광반응성 polyvinylcinnamate 필름 위에서 액정 분자들의 배향에 관한 연구를 수행하였다. 선편광 UV를 polyvinylcinnamate 필름에 노광하면 선택적인 광반응에 의하여 필름 내에 이방성이 형성되고, 필름 표면에 인접한 액정 분자는 고분자와 분자간 상호작용으로 고분자 배향 방향과 동일한 방향으로 늘어선다. 광배향막을 사용한 액정 셀의 열 및 빛에 대한 안정성은 배향막에 UV를 다시 노광하고 열을 가한 후 유도된 액정 배향 변화를 측정하여 조사하였다. 선편광 UV를 여러번 노광한 필름의 경우 처음 노광 방향에 관계없이 최종으로 노광한 편광 UV의 방향에 따라 액정 배향이 유도되었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 춘계학술발표회 초록집
• /
• pp.72-72
• /
• 2001

Plasma polymerized thin films have been deposited on Si(lOO) substrates at $25-400^{\circ}C$ using thiophene ($C_4H_4S$) precursor by plasma assisted chemical vapor deposition (PACVD) method for low-dielectric device application. In order to compare physical properties of the as-grown thin films, the effects of the plasma power, gas flow ratio and deposition temperature on the dielectric constant and thermal stability were mainly studied. XRD and TED studies revealed that the as-grown thin films have highly oriented amorphous polymer structure. XPS data showed that the polymerized thin films that grown under different RF power and deposition temperature as well as different gas ratio of $Ar:H_2$ have different stoichiometric ratio of C and S compared with that of monomer, indicating a formation of mixture polymers. Moreover, we also realized that oxygen free and thermally stable polymer thin films could be grown at even $400^{\circ}C$. The results of SEM, AFM and TEM showed that the polymer films with smooth surface and sharp interface could be grown under various deposition conditions. From the electrical property measurements such as I-V and C-V characteristics, the minimum dielectric constant and the best leakage current were obtained to be about 3.22 and $10-11{\;}A/\textrm{cm}^2$, respectively.