• The Journal of Engineering Geology
• /
• v.19 no.2
• /
• pp.119-129
• /
• 2009

In relation to slope stability analysis, geologic characteristics and engineering properties of the discontinuities in three slopes selected are compared and analyzed by both square-inventory method and scanline survey. The aim of the study is in evaluating which method is applied better in slope stability analysis by comparing results of the two methods with those of direct observation on outcrop of slope failures generated. In each slope, results of comparative analysis among geologic and engineering properties are analyzed similarly one another. However, results of orientation analysis in slope 2 are different each other, which indicates orientation of joints in slope 2 depends on persistency and frequency of each joint and also indicates appearance of new joint set with different orientation. Probability density distribution and spacing in slope 3 are high in comparison to those in slope 2 and 3. The reasons are that distribution of psammitic rocks and development of minor folds in slope 3 unlike slope 2 and 3 are closely associated with development of joints. The research data indicate that the square-inventory method predicts more precise failure aspects and is more effective way than scanline survey in analyzing slope stability of the study area.

• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.573-580
• /
• 2009

This paper presents the mix composition, production method, and curing condition applied to the extruded ECC(Engineered Cementitious Composite) panel which are able to exhibit multiple cracking and potential pseudo strain-hardening behavior. In addition to the production technique of extruded ECC panel, the effect of fiber distribution characteristics, which are uniquely created by applying extrusion process, on the flexural behavior of the panel is also focussed. In order to demonstrate fiber distribution, a series of experiments and analyses, including image processing/analysis and micro-mechanical analysis, was performed. The optimum mix composition of extruded ECC panel was determined in terms of water matrix ratio, the amount of cement, ECC powder, and silica powder. It was found that flexural behavior of extruded ECC panel was highly affected by the slight difference in mix composition of ECC panel. This is mainly because the difference in mix composition results in the change of micro-mechanical properties as well as fiber distribution characteristics, represented by fiber dispersion and orientation. In terms of the average fiber orientation, the fiber distribution was found to be similar to the assumption of two dimensional random distribution, irrespective of mix composition. In contrast, the probability density function for fiber orientation was measured to be quite different depending on the mix composition.

• Tunnel and Underground Space
• /
• v.13 no.5
• /
• pp.344-352
• /
• 2003

The procedures to correct sampling biases for discontinuity data obtained from 1D survey line(borehole or scanline) is addressed. The Probability of intersection between the survey line and a circular discontinuity is considered, and a correction far orientation bias is developed assuming discontinuities as equivalent circular disks. The correction incorporates the effect of the angle between the direction of survey line and each discontinuity plane belonging to the discontinuity cluster, size of each discontinuity and length of the survey line. A procedure is provided to estimate unbiased discontinuity spacing parameters using the discontinuity spacing data based on the measurements carried out on a finite length of the survey line.

• Journal of Korean Academy of Nursing
• /
• v.38 no.5
• /
• pp.676-684
• /
• 2008

Purpose: The purpose of this study was to identify the risk factors for falls and to suggest data for developing a program for preventing falls. Methods: This was a case-control study in five university hospitals and a general hospital. In total, 216 patients over the age of 18 yr admitted from January 1 to December 31, 2007 participated. One hundred eight patients with experience of falling were matched by gender, age level, diagnosis, and length of stay with 108 patents with no experience of falling admitted on the same unit. A quality assurance coordinator nurse in each hospital examined 35 fall risk factors developed by researchers. Results: In acute hospitals, history of falls, orientation ability, dizziness or vertigo, general weakness, urination problems, transfer/mobility difficulty, walking dependency, impatience, benzodiazepines, diuretics, and vasodilators showed significance on adjusted-odds ratios for fall. Logistic regression analysis was performed to elucidate the factors that influence falls. The probability of falls was increased by dizziness/vertigo, general weakness, and impatience/agitation. Conclusion: This finding can be used as a useful resource in developing nursing intervention programs to predict and prevent the falls of inpatients.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.943-950
• /
• 2011

In this paper, we presented an attention measurement method in 2D and 3D image/video to be applied for image and video retargeting and compressive processing. 2D attention is derived from the three main components, intensity, color, and orientation, while depth information is added for 3D attention. A rarity-based attention method is presented to obtain more interested region or objects. Displaced depth information is matched to attention probability in distorted stereo images and finally a stereo distortion predictor is designed by integrating low-level HVS responses. As results, more efficient attention scheme is developed from the conventional methods and performance is proved by applying for video retargeting.

• Wind and Structures
• /
• v.3 no.3
• /
• pp.177-191
• /
• 2000

This paper presents an approach for evaluating directionality effects for both wind speeds and wind loads in hurricane-prone regions. The focus of this study is on directional wind loads on low-rise structures. Using event-based simulation, hurricane directionality effects are determined for an open-terrain condition at various locations in the southeastern United States. The wind speed (or wind load) directionality factor, defined as the ratio of the N-year mean recurrence interval (MRI) wind speed (or wind load) in each direction to the non-directional N-year MRI wind speed (or wind load), is less than one but increases toward unity with increasing MRI. Thus, the degree of conservatism that results from neglecting directionality effects decreases with increasing MRI. It may be desirable to account for local exposure effects (siting effects such as shielding, orientation, etc.) in design. To account for these effects in a directionality adjustment, the factor described above for open terrain would need to be transformed to other terrains/exposures. A "local" directionality factor, therefore, must effectively combine these two adjustments (event directionality and siting or local exposure directionality). By also considering the direction-specific aerodynamic coefficient, a direction-dependent wind load can be evaluated. While the data necessary to make predictions of directional wind loads may not routinely be available in the case of low-rise structures, the concept is discussed and illustrated in this paper.

• Journal of Distribution Science
• /
• v.18 no.5
• /
• pp.83-88
• /
• 2020

Purpose of the research: In response to the increasing number of selling centers, this paper examines factors that influence the voluntary participation in selling centers. The goal of this study is to enable organizations to meet changing market conditions, which require interdisciplinary collaboration during sales projects. This paper also discusses potential problems which may occure during the implementation of these factors in practice. Research design and methodology: The research method consists of a qualitative cross-sectional study with N=12 interviewees. All interviewees are current or former selling center participants. During the interview sessions, semi-structured face-to-face interviews were used, which were evaluated using a qualitative content analysis. In addition, a frequency analysis was applied to evaluate the number of mentions per factor. Research results: In total, five factors were raised in order to improve the framework conditions of voluntary participation. These factors are performance incentives, transparency, availability of resources, goal orientation, as well as collegiality and affiliation. Major conclusions: The identified factors are also under discussion in the existing literature. Knowing about factors that generate voluntary participation in selling centers pays off particularly in improving the probability of completion of sales projects in which buying centers and selling centers are working together.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9C
• /
• pp.756-760
• /
• 2010

This paper is proposed to an novel facial behavior recognition system for driver's fatigue detection. Facial behavior is shown in various facial feature such as head expression, head pose, gaze, wrinkles. But it is very difficult to clearly discriminate a certain behavior by the obtained facial feature. Because, the behavior of a person is complicated and the face representing behavior is vague in providing enough information. The proposed system for facial behavior recognition first performs detection facial feature such as eye tracking, facial feature tracking, furrow detection, head orientation estimation, head motion detection and indicates the obtained feature by AU of FACS. On the basis of the obtained AU, it infers probability each state occur through Bayesian network.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.2
• /
• pp.277-286
• /
• 2019

The study aims to analyze the influence of egoistic, altruistic and biospheric value on green functional benefit, green monetary cost, green satisfaction and green loyalty. The study analyzes the effect of green functional benefit and green monetary cost on green satisfaction and green loyalty, as well as green satisfaction on green loyalty. The study employs quantitative methods with customers who have green brand purchase experience in Indonesia. Non-probability sampling was conducted using purposive sampling method based on predetermined criteria, which are customers who have already purchase and use green brand products. A total of 402 samples were analyzed using Structural Equation Modelling. The result shows that the data support hypotheses on egoistic and biospheric value, hypotheses on green functional benefit effect to green satisfaction and green loyalty, as well as green monetary cost effect to green loyalty. The other hypotheses are not supported by data. As a conclusion, it is egoistic and biospheric value that has positive effect on green loyalty, while green functional benefit and green monetary cost act as mediation between the value orientation and green loyalty. As managerial implication, green brand marketing strategy should incorporate egoistic and biospheric values in messages in advertising and promotion.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.669-674
• /
• 1996

The theory of quantum mechanics states that for any system there are a set of discrete physical states, quantum states, which corresponds a particular energy level of the system. The lowest energy the system can have, corresponding to its ground state, is not necessarily zero, but depends only on the precise microscopic nature of the system under consideration. At the absolute zero of temperature all systems will be in their lowest energy state (zero point energy) and as the system is warmed from OK, the higher energy states become occupied. The probability of occupancy of the excited states relative to that of the ground state is proportional to the absolute temperature. Therefore we can obtain nuclear dipole and quadrupole moment very accurately at ultra low temperature (<15mk) by NMR and from the destruction of anisotropy. The former is called LTNO/NMR and the latter is called LTNO (Low Temperature Nuclear Orientation). In this paper we discuss and introduce only an experimental apparatus with results of cooling power test, a helium dilution refrigerator, which can reache 8mK, and an actual technique for the experiment, a theory and results will be presented in another papers.