• 제목/요약/키워드: Oriental lacquer

검색결과 18건 처리시간 0.037초

UV-Degradation Chemistry of Oriental Lacquer Coating Containing Hindered Amine Light Stabilizer

  • 홍진후;박미영;김현경;최정오
    • Bulletin of the Korean Chemical Society
    • /
    • 제21권1호
    • /
    • pp.61-64
    • /
    • 2000
  • FT-IR/ATR analysis shows that the oriental lacquer coating network degrades mostly in the unsaturated side chain. The rate of increase in carbonyl intensity (a measure of photodegradation) during the accelerated weathering test was substantially different for the unstabilized and stabilized samples; adding 2 wt% HALS into the oriental lacquer formulation enhanced photostabilization up to three times. Weight loss measurements, another indication of photodegradation, and SEM analysis support this conclusion. Despite the presence of the photo-stabilizer, the other properties of the lacquer were not significantly affected. In particular, the curing behavior of purified lacquer (PL) and HALS-stabilized samples is similar, although the in-situ DETA analysis showed that addition of HALS can slightly retard the cure reaction rate in oriental lacquer coating. It is hypothesized that this cure retardation may be related to the salt formation between HALS and acid of oriental lacquer.

옻칠한지의 제조 및 특성 (The Characteristics of Hanji Prepared with Lacquer)

  • 조현진;이상극;노정관
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2007년도 춘계학술대회논문집
    • /
    • pp.380-390
    • /
    • 2007
  • The purpose of this study is to make a functional Hanji treated with an oriental lacquer which has various functionalities. The raw oriental lacquer produced in China was used in this study This lacquer was diluted with ethanol and terpene in different solvent ratios. The diluted lacquer in the solvents had two layers. The upper layer was solvent soluble and the lower contained precipitates. Hanji was treated with the solvent solubles and the mixture containing precipitates, and then properties of the Hanji were evaluated. The oriental lacquer consisted of 25.04% of water, 60% of urushiol, 3.13% of nitrogen-containing compounds, and 5.66% of gum. The pH of oriental lacquer was 5.3 and the viscosity was 1680 cP. The average weight, thickness, and density of Hanji treated with oriental lacquer tended to gradually decreased as the lower concentration of lacquer was used and as the solvent soluble was treated. Tensile strength of the treated Hanji decreased when the diluted lacquer was used and Hanji treated with terpene dilutes at the ratio of lacquer to solvent of 1:5 (v/v) showed higher tensile strength than ones treated with ethanol dilutes. The folding endurance decreased as the less concentrated lacquer was used and the highest value was obtained when 1:40 (v/v) of lacquer to solvent ratio in both ethanol and terpene mixture. Absorption ratio was higher in the Hanji treated with ethanol mixture, treated with the lacquer in higher concentration, and treated with ethanol mixture. Hanji treated with ethanol dilutes at 1:20 (v/v) and the lower ratio of lacquer to solvent showed a hydrophobic property. Amount of the bound dye materials tended to be decreasing as the concentration of lacquer becomes lower and it was higher in Hanji treated with ethanol mixture than with terpene mixture. Color of Hanji treated with the solvent diluted mixture was Y to YR-type, whereas that of Hanji treated with raw oriental lacquer was Y-type, terpene

  • PDF

옻칠한지의 제조 및 특성 (The Characteristics of Hanji Prepared with Lacquer)

  • 조현진;이상극;노정관
    • 펄프종이기술
    • /
    • 제39권3호
    • /
    • pp.70-76
    • /
    • 2007
  • The raw oriental lacquer produced in China was used in this study. This lacquer was diluted with ethanol and terpene in different solvent ratios. The diluted lacquer in the solvents had two layers. The upper layer was solvent soluble and the lower contained precipitates. Hanji was treated with the solvent solubles and the mixture containing precipitates, and then properties of the Hanji were evaluated. The average weight, thickness, and density of Hanji treated with oriental lacquer tended to gradually be decreased as the lower concentration of lacquer was used and as the solvent soluble was treated. Tensile strength of the treated Hanji decreased when the diluted lacquer was used and Hanji treated with terpene dilution at the ratio of lacquer to solvent of 1:5 (v/v) showed higher tensile strength than ones treated with ethanol dilution. The folding endurance decreased as the less concentrated lacquer was used and the highest value was obtained when 1:40 (v/v) of lacquer to solvent ratio in both ethanol and terpene mixture. Absorption ratio was higher in the Hanji treated with ethanol mixture, treated with the lacquer in lower concentration, and treated with ethanol mixture. Hanji treated with ethanol dilution at 1:20 (v/v) and the lower ratio of lacquer to solvent showed a hydrophobic property. Amount of the bound dye materials tended to be decreasing as the concentration of lacquer became lower and it was higher in Hanji treated with ethanol mixture than with terpene mixture.

옻에 대한 문헌적 고찰 (A literature study on lacquer poison)

  • 이경민;권기록;최성모;김태희
    • 대한약침학회지
    • /
    • 제5권1호
    • /
    • pp.159-169
    • /
    • 2002
  • Objective: It will be examined in this research whether Lacquer poison can be used as an distinguished treatment to cure incurable diseases by considering literature existing and various papers. Method: I studies origin, alias, species, toxicity, effect, treatment, component, medical action and contraindication of Rhus vemiciflua stokes through various kinds literatures. Results: Sap of Rhus vemiciflua stokes that is used for medical purposes, has an effect on anti-tumor, anti-oxidation, hangover cure, and gastritis suppression. Even though urushiol and fIavonoids, the main ingredient of lacquer, has medical cure effects. but urushiol results in a dermatropic allergy. Sincc xylem of a Rhus vemiciflua stokes, however. does not induce the allergy but has medical efficacy, research on this topic is needed.

방사선에 의한 옻칠표면의 변화 (Change of Lacquer Surface by Radiation)

  • 윤국중
    • 방사선산업학회지
    • /
    • 제12권4호
    • /
    • pp.333-336
    • /
    • 2018
  • Natural lacquer was cured at room temperature at a relative humidity of 60% at $27^{\circ}C$ to obtain a lacquer film. Photolysis of lacquer was investigated by irradiating 1~75 kGy of gamma ray to this lacquer film. No significant changes were observed in the range of 1~10 kGy radiation. As the radiation doses were increased, the white spots were increased in the scanning electron microscope photographs. The increase of the white dots of the lacquer surface shows that the lacquer is degradation by radiation. As a result of IR spectral analysis of the lacquer surface with increasing irradiation dose, there was no significant change in $3,445cm^{-1}$ hydroxide group, $2,900cm^{-1}$ hydrocarbon group, and $993cm^{-1}$ triene group. However, the $1,745cm^{-1}$ carbonyl group was found to increase, and the $1,715cm^{-1}$ unsaturated hydrocarbon group and the $1,463cm^{-1}$ methylene group showed a tendency to decrease.

Surface and Dielectric Properties of Oriental Lacquer Films Modified by UV-Curable Silicone Acrylate

  • Hong, Jin-Who;Kim, Hyun-Kyoung
    • Macromolecular Research
    • /
    • 제14권6호
    • /
    • pp.617-623
    • /
    • 2006
  • In order to achieve an oriental lacquer (OL) film with a thick consistency, UV-curable silicone acrylate (SA) was added to OL by a dual curing process. The addition of 5 wt% UV-curable SA to the OL fomulation enabled the preparation via a single drying step of a $77{\mu}m-thick$ film exhibiting excellent surface properties. FTIR-ATR was used to investigate the effect of UV-curable SA on the behavior of film formation during curing, and the relaxation behavior of the produced films was investigated by dielectric spectroscopy. Dielectric properties were measured in the frequency range $10^{-2}-10^5\;Hz$ at various temperatures between -100 and $200^{\circ}C$. The results demonstrated that OL modified by UV-curable SA has a higher glass transition temperature and stronger secondary relaxation at a lower temperature than the conventional OL system. The OL film modified with UV-curable SA was presumed to be harder at the surface and tougher than conventional OL film.

Dielectric Properties of Oriental Lacquer Coating Network

  • 홍진후;김현경;허귀석;최종오
    • Bulletin of the Korean Chemical Society
    • /
    • 제18권7호
    • /
    • pp.715-719
    • /
    • 1997
  • In order to study the dielectric properties of the oriental lacquer films, three different films have been prepared differing purification and curing procedures. Dielectric properties were measured in the frequency range of 1 Hz to 105 Hz at various temperatures between - 50 ℃ and 150 ℃. The DEA using 1 Hz showed that glass transition and secondary relaxation temperatures of oriental lacquer film are very time dependent. In addition, the frequency-independent negative peak between 25 ℃ and 45 ℃ was observed, which could represent the formation of crosslink by laccase enzyme during heating. On the contrary, the high temperature cured film showed a hardly noticeable negative peak at the temperature range. The relationship between thermodynamic properties and chemical structures has been discussed based on the analysis of the dielectric relaxation behavior using the Cole-Cole plot and the dielectric relaxation intensity.

화칠채취의 기계화작업 가능성에 대한 옻채취 시험분석 (Experiment on Mechanization Possibility for Collection of Korean Rhus Lacquer by Heating Rhus verniciflua)

  • 송병민
    • 한국자원식물학회지
    • /
    • 제21권1호
    • /
    • pp.87-90
    • /
    • 2008
  • 본 연구는 과거부터 전해져 내려온 전통방식의 옻채취방법인 화칠법을 기계적 방식으로 전환시킬 수 있는가에 대한 가능성을 파악하기 위하여 전통적인 방법과 기계적 방법으로 화칠채취공정을 조사 분석하였다. 옻나무의 중량단위당 나무개수에 따른 화칠채취공정에서 기계식이 재래식에 비해 약 45% 옻액을 더 많이 생산하는 것으로 나타났으며, 일반적으로 옻나무의 단위 중량당 화칠채취의 소요시간은 나무개수가 많을 수록 시간이 더 많이 소요되었으나 기계식이 재래식 보다 시간이 좀 더 걸리는 것으로 나타났다. 그러나 연속적으로 작업을 계속할 경우에 재래식은 줄기에 홈을 낼 때 육체적 힘을 많이 소비하므로 오랜 시간 작업을 하기가 어려운 것으로 판단된다.

건칠(乾漆)의 해독방법에 대한 문헌연구 (Study on the Detoxification of Lacca Sinica Exsiccata Written in the Classical Writings)

  • 이재호;김영삼;한규조;김명동
    • 동의생리병리학회지
    • /
    • 제19권5호
    • /
    • pp.1169-1180
    • /
    • 2005
  • First, I read all the materials, including Dongeuibogam(Encyclopedia Medica Koreana), classical writings on Lacca sinica exsiccata, herbal writings on lacquer poison, and herbal books on how to treat lacquer poison. And then after 1 examined all the details on qi and taste of Lacca sinica exsiccata, its efficacy, detoxification, lacquer poison, and its effects on body symptom, 1 got the following results. The order of frequency that Lacca sinica exsiccata is used in Dongeuibogam is pressure-feeling, blood circulation, and insect biting. Its way of intake is not so much through herb-boiling or powdered medicine as through hand-made pills. When medicine is used in the form of pills, the Lacca sinica exsiccata is more included among other ingredients. When old doctors treated pressure-feeling in the chest, they mixed up other herbs, with not putting more emphasis on the efficacy of lacquer 010 doctors believed that toxicity of Lacca sinica exsiccata is not having its own poison, but having biased dominance in the use of its qE and taste. The way or detoxification or Lacca sinica exsiccata is used in the order of crab-boiled water, egg, Xanthoxylum piperitum, Perilla frutescens, Astar tataricus, a weeping willow, iron-tempered water, and Allium toberosum. Special point in detoxificating lacquer poison is that they used medicines for well-ciruculating pulmonary stream, medicines for promoting to urinate or discharge by helping large colons to move, medicines for making the lacquer scar small, medicines for helping digest, and medicines for improving vessel function in the poisoned area. With the above results, the more profound study, based on the crab-boiled water and egg, is expected to go on to increase the effect on the one hand, and to make the new way of lessening or removing the toxicity of lacquer with more safe use on the other hand.

과학적 분석방법을 이용한 무령왕릉 목관재의 옻칠 기법 연구 (Lacquer Manufacturing Method for the Wooden Coffins of King Muryeong's Tomb based on the Scientific Analysis)

  • 김수철;이광희;강형태;신성필;한민수
    • 보존과학회지
    • /
    • 제26권3호
    • /
    • pp.247-258
    • /
    • 2010
  • 무령왕릉 출토 목관재 6점의 칠도막 편에 대하여 광학 현미경 관찰, 적외선 분광분석 및 SEM-EDS 분석을 실시하였다. 목관재에 도장된 옻칠 기법은 크게 네 가지 방법으로 분류되었다. 목재 표면에 그을음(미립자의 흑색 안료)을 혼합한 흑색 안료층이 밑층으로 존재하면서 그 위로 칠이 1회(그룹 II) 도장된 것과 3회(그룹 I) 도장된 것, 흑색 안료층이 존재하지 않으면서 칠 도장이 1회(그룹 IV)와 2회(그룹 III) 되어있는 것으로 분류되었다. 이는 목관의 제작기법과 부재의 결구 방법을 밝히는데 좋은 정보가 될 것으로 생각된다. 적외선 분광분석을 통해 무령왕릉 칠도막은 자외선에 의한 열화 요인이 적은 것으로 나타났다. 이는 이동이 어려운 목관의 크기와 무덤이라는 매장 환경 등에 기인한 결과로 보인다. 또한 SEM-EDS 분석결과 현재까지 고대 칠분석에서 보고된 바 없는 Ca, Fe, Cu의 성분이 확인되어 의미가 있다.