• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1123-1132
• /
• 1994

Bi-Sr-Ca-Cu-O superconductor thin films were prepared on MgO and LaAlO3 substrates by MOCVD technique. The films deposited on MgO and LaAlO3 substrates became superconducting at 64 K and 70 K respectively. The measured critical current density of thin film deposited on LaAlO3 substrate was around 104 A/$\textrm{cm}^2$. After annealing at $700^{\circ}C$ for 3 hours, the critical transition temperature(Tc) of films deposited on LaAlO3 was changed from 70 K to 74 K.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.531-534
• /
• 2002

NiO buffer layers for YBCO coated conductors were deposited on hi-axially textured Ni substrates by MOCVD(metal organic chemical vapor deposition) method, using single solution source. To establish the processing condition, oxygen partial pressure and deposition temperature were changed. The surface orientation and degree of texture were estimated by X-ray diffraction, X-ray pole figure and atomic force microscopy. The FWHMs of in-plane and out-of-plane of the NiO films were about 10$^{\circ}$. The surface roughness was a function of deposition temperature. The AFM surface roughness of NiO films is in the range of 3∼10 nm, when NiO films was grown at 450∼530$^{\circ}C$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.692-696
• /
• 2005

In an attempt to fabricate all inclusive display systems we are presenting a study on several elements that would be used as building blocks for all-on-board integrated applications on stainless steel foils. These systems would include in the same substrate all or many of the components needed to drive a flat panel OLED display. We are reporting results on both digital and analog circuits on stainless steel foils. Shift registers running at speeds greater than 1.0MHz are shown as well as oscillators operating at over 40MHz. Pixel circuits for driving organic light emitting diodes are presented. The device technology of choice is that based on poly-silicon TFT technology as it has the potential of producing circuits with good performance and considerable cost savings over the established processes on quartz or glass substrates (amorphous Silicon a-Si:H or silicon on Insulator SOI).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.108-111
• /
• 2003

Currently, molecular devices are reported utilizing active self-assembled monolayers containing the nitro group as the active component, which has active redox centers[1]. We confirm the electrical properties of 4,4-di(ethynylphenyl)-2'-nitro-1-benzenethiolate. To deposit the SAM layer onto gold electrode, we transfer the prefabricated Au(111) substrates into a 1mM self-assembly molecules in THF solution. Au(111) substrates were prepared by ion beam sputtering method of gold onto the silicon wafer. As a result, we measured current-voltage curve using ultra high vacuum scanning tunneling microscopy (UHV STM), I-V curve also clearly shows several current peaks between the negative bias region (-0.3958V) and the positive bias region (0.4658V), respectively.

• 한국해양학회지:바다
• /
• 제8권2호
• /
• pp.210-224
• /
• 2003

황산염 환원은 혐기성 해양환경에서 황산염 환원 박테리아가 진행시키는 미생물 반응이다. 황산염 환원 반응은 저층으로 공급되는 유기물 분해의 상당 부분을 담당하며, 이때 발생되는 황화가스의 독성 및 주변 금속과의 높은 반응성, 그리고 유기물 분해시 유리되는 무기 영양염들의 수층 용출 등으로 인해 연안생태계 내의 생물 다양성 및 생지화학적 물질의 순환경로에서 중요한 역할을 한다 여러 해양환경의 퇴적토에서 보고 된 황산염 환원율과 이에 영향을 미치는 주요한 환경요인들에 대해 정리한 결과, 공급되는 유기물과 여러 전자수용체들(산소, 질산염, 산화 철, 망간 등)의 분포가 황산염 환원율 및 유기물 분해시 황산염 환원의 상대적 중요성에 직접 영향을 미치는 것으로 나타났다 아울러 전자수용체의 분포와 유기물의 양과 질을 조절하는 요인으로서 온도, 식생의 유무, 생물교란의 영향에 대해 토의하였다. 끝으로, 우리나라와 같이 갯벌이 발달되고, 유기물 부하가 높은 인공양식장의 가동, 부영양화 등으로 인해 혐기성 환경과 적조의 발생빈도가 점증하는 상황에서 유기(오염)물 분해과정과 영양염 순환 경로를 보다 잘 이해하기 위해서 황산염 환원을 중심으로 한 다양한 혐기성 미생물 생태연구가 중요함을 제안한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1030-1033
• /
• 2004

We herewith report for the effect of dielectric surface modification on the electrical characteristics of organic thin-film transistors (OTFTs). The kist-jm-1 as an organic molecule for the surface modification is deposited onto the surface of zirconium oxide ($ZrO_2$) gate dielectric layer. The OTFTs are elaborated on the flexible plastic substrates through 4-level mask process to yield a simple fabrication process. In this work, we also have examined the dependence of electrical performance on the interface surface state of gate dielectric/pentacene, which may be modified by chemical properties in the gate dielectric surface.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.121.2-121.2
• /
• 2011

Aluminum-doped Zinc Oxide (AZO) is considered as an excellent candidate to replace Indium Tin Oxide (ITO), which is widely used as transparent conductive oxide (TCO) for electronic devices such as liquid crystal displays (LCDs), organic light emitting diodes (OLEDs) and organic solar cells (OSCs). In the present study, AZO thin film was applied to the transparent electrode of a channel-shaped flexible organic solar cell using a low-temperature selective-area atomic layer deposition (ALD) process. AZO thin films were deposited on Poly-Ethylene-Naphthalate (PEN) substrates with Di-Ethyl-Zinc (DEZ) and Tri-Methyl-Aluminum (TMA) as precursors and $H_2O$ as an oxidant for the atomic layer deposition at the deposition temperature of $130^{\circ}C$. The pulse time of TMA, DEZ and $H_2O$, and purge time were 0.1 second and 20 second, respectively. The electrical and optical properties of the AZO films were characterized as a function of film thickness. The 300 nm-thick AZO film grown on a PEN substrate exhibited sheet resistance of $87{\Omega}$/square and optical transmittance of 84.3% at a wavelength between 400 and 800 nm.

• 폴리머
• /
• 제30권3호
• /
• pp.187-195
• /
• 2006

원자힘 현미경 양극산화 패터닝 기술에 관한 연구를 유기 저항막의 종류 및 그들의 특성을 토대로 다루었다. 본 연구실에서 수행한 자기조립막, 랑뮈어-블라짓막, 고분자막 위에서의 원자힘 현미경 양극산화 패터닝에 대한 연구결과를 중심으로, 유기 저항막 위에서의 원자힘 현미경 양극산화 패터닝 기술에 대한 이해를 돕고자 하였다. 현실적인 공정 속도에서 높은 종횡비의 패턴을 형성하기 위해 원자힘 현미경 양극산화 패터닝에 유기 저항막의 전기-기계적 특성, 젖음 특성, 에칭 저항 특성 등이 중요한 인자들임을 제안하였다.

• KCI Concrete Journal
• /
• 제14권4호
• /
• pp.171-177
• /
• 2002

Antifungal agents are used to impart antibacterial or bactericidal properties to commodities and various articles used in industries and can be classified into two broad groups i.e organic and inorganic. Inorganic antifungal agents comprise of Ag, Zn, or Cu, etc. These elements tend to exhibit high level of antifungal activities, non-uniform dispersion in substrates, and have poor properties in expensive and cheap adhesiveness. In this study, the organic antifungal agent was used for the purpose of investigating the antifungal activity of antifungal agent activated-cement mortar (AACM) on the aspergilus niger of various fungus which can be easily discovered in the interiors and exteriors of buildings. In addition, an experiment on the basic physical properties of AACM such as compressive and flexural strength was carried out. The conclusion of this investigation revealed that a dosage increase of antifungal agent exhibits a high inhibitory effect on the aspergilus niger, and although there is a slight decrease in the strength of AACM, the strength of AACM was almost equal to that of inactivated cement mortar.

• 생태와환경
• /
• 제43권4호
• /
• pp.453-458
• /
• 2010

DOC (Dissolved Organic Carbon) is an operational terminology for organic carbon molecules dissolved in natural waters. DOC has been studied by ecologists extensively, because it plays a key role in various ecological functions such as substrates for secondary production and the carbon cycle. DOC also represents a substrate for microbial growth within potable water distribution systems, and can react with disinfectants (e.g., chloride) to form harmful disinfection by-products. In addition, residual DOC may carry with it organically bound toxic heavy metals. DOC in aquatic ecosystems may ultimately be transported to the oceans, or released back to the atmosphere by heterotrophic respiration, which can accelerate global climate change. There is evidence that DOC concentrations in aquatic ecosystems are increasing in many regions of the world including Europe, North America, and even in Korea. Land use changes, elevated temperature, elevated $CO_2$, recovery from acidification, and nitrogen deposition have been proposed as mechanisms for the trend. However, the key driving mechanism is yet to be conclusively determined. We propose that more extensive and longer-term observations, research of chemical properties of DOC, impacts of elevated DOC on environmental issues and interdisciplinary approaches are warranted as future studies to fill the gaps in our knowledge about DOC dynamics.