• Journal of the Korean Society of Safety
• /
• v.20 no.3 s.71
• /
• pp.134-142
• /
• 2005

This study is to find out how organic solvent will be propagated from painting inside the steel box girder of bridge. $2.9m{\times}3.0m$ of inside size of steel box girder is not suitable for painters to do his work comfortably and hygienically. Substance density(ppm)inside the space of the box unsatisfactory hygienical condition. Most of organic solvent(mainly toluene) came down to 0.5m in two minutes and 53sec. But personal protection for painter should be properly kept against flying this heavy organic solvent. longitudinally 27.1m in length is a cell unit of the whole length of bridge. Model XP-3l6A made in Japan is a main instrumentation adjusted to sense organic solvent especially toluene which can be measured up to 10,000ppm. Scenario analysis by computer program, safer release 2.0 has been performed first to estimate how the organic solvent will be propagated. And then actual test was done as a model. This has been measured for approximately five(5) minutes, with 30 sec interval. Actual measurement results showed much higher $10{\sim}20%$ than result analyzed by the computer program, meaning that this painting work can give worse effect to the worker who is painting inside the box girder of the bridge. The first meas urement level over the floor set up at 30cm height from the floor, because organic solvent was estimated to stay at the level. and then, they were measured at 1.0m, 1.5m level respectively, more.

• KSBB Journal
• /
• v.29 no.2
• /
• pp.98-105
• /
• 2014

Three different types of extraction processes, which used supercritical carbon dioxide ($SCCO_2$) and organic solvent, were attempted to improve the extraction yield of oil from Chlorella vulgaris: cosolvent-modified $SCCO_2$ extraction, $SCCO_2$ extraction with ultrasonic sample treatment in organic solvent, and static extraction with organic solvent followed by dynamic $SCCO_2$ extraction. Among these, the last $SCCO_2$ extraction process was found to be most effective in the extraction of oil. Compared with pure $SCCO_2$ extraction, the extraction yield of oil was observed to increase about 7 times.

• KSBB Journal
• /
• v.9 no.1
• /
• pp.63-71
• /
• 1994

During the last decade enzyme reaction in organic solvent has been studied to show that specificity in buffer is different from that in organic solvent. The specificity of restriction enzyme was effected by various factors such as ionic strength, salt organic solvent and temperature. In this study, restriction enzyme PvuII which is used most frequently in genetic engineering and the substrate was vector pGEM3 whose sequence was already known were used. As a result the recognition sequence site was changed in the presence of organic solvents whose Log P are -1.5∼0. Their specificities were contrast with activities were contrasted. Specificities were not changed in organic solvent easily in inactivating enzyme. We think that the enzyme recognition site was not changed randomly but by preferential order. A recombinant vector which does not contain typical cleavage site CAG↓CTG was cleaved in 20% ethanol solution. This result might show that restriction enzyme could be used to cleave at unusual sites by changing the reaction conditions.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.4
• /
• pp.202-206
• /
• 1988

In order to investigate the oligomerization state of the plasma membrane proteolipid apoprotein purified from the bovine kidney, fluorescence polarization experiment was carried out in the two different solvent systems, i.e., water and organic solvent(chloroform-methanol). The molecular volumes of the proteins estimated from the Perrin equation, were to be 45,258$A^3$ and 17,608$A^3$ in water and organic solvent, respectively. These values indicate that a trimerization is possibly occurring in the aqueous environment. As an auxiliary experiment for the calculation of the molecular volume using Perrin equation, fluorescence quenching constants ($K_q$) with the quencher acrylamide and fluorescence lifetimes (${\tau}_F$) of the intrinsic fluorophore tryptophan residue were estimated in the two different solvent systems. $K_q$ in water was 18.21$M^{-1}$ and it was 46.24$M^{-1}$ in organic solvent. Fluorescence lifetimes of tryptophan residue were calculated to be 2.80 nsec. in water and 3.81 nsec. in organic solvent, respectively.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.1
• /
• pp.17-25
• /
• 2001

The purpose of this study is to substitute water-based painting materials for the current solvent-based ones used in motor-repairing process to minimize the exposure of organic solvents to the painters. This study assessed the exposure of organic solvents to the painters using water-based and solvent-based painting materials and compared compositions, painting processes and the health hazards of the application of these alternative painting mate rials. The results of this study are as follows. 1. solvent-based painting materials used in motor-repairing process consist of various organic solvents, which consist primarily of toluene, xylene, ethyl benzene, ethyl methyl benzene, trimethyl benzene, ethyl acetate, butyl acetate, methyl isobutyl ketone, 2-ethoxy ethanol, 2-ethoxy ethyl acetate and toluene-2,4-diisocianate and the others. These organic solvents are known as health-hazardous substances. But water-based painting materials are high-solid, low-solvent one sand consist of such two organic solvents as 2-butoxy ethanol and 2-heptanone and the others. 2. The painters us ing solvent-based painting mate rials in motor-repairing process are exposed to various organic solvents which consist of toluene, xylene, ethyl acetate, butyl acetate, methyl isobutyl ketone, trimethyl benzene, 2-ethoxy ethanol, and 2-ethoxy ethyl acetate. But the painters using solvent-based ones are only exposed to 2-butoxy ethanol and 2-heptanone. 3. By using water-based painting materials in stead of solvent-based painting materials containing health-hazardous organic solvents, the exposure of such organic solvents in the painter's breathing zone can be largely prevented. 4. This study recommends water-based painting materials as substitutes for the current solvent-based ones used in motor-repairing process to minimize the exposure of organic solvents to the painters.

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.1 s.41
• /
• pp.147-164
• /
• 1993

A study has been conducted on developing questionnaires to serve as on site diagnostic tools for the early detection of neuropsychiatric impairment among workers chronically exposed to low-level organic solvents. Two drafts of tentative questionnaires have been developed as follows; several question items were selected from questionnaires which were administered to workers exposed to organic solvents in previous studios and were grouped into each symptom category based on the presence of its association using Guttman scaling method, then these selected items were reviewed by neuropsychiatry specialists. The final draft of the questionnaire (total symptom score=36) was developed by selecting 33 question items which had more than a 0.88 Guttman coefficient of reproducibility in each symptom category from a pilot study in which these tentative questionnaires were administered to workers manufacturing soles. Three plants using organic solvents and one plant never using organic solvents as a control group were selected to test the reliability and validity of the developed questionnaires. The major organic solvent in the workplace environment detected by a personal air sampler and GC/MSD nab toluene. The concentration of toluene in air from the department using organic solvent was statistically different from that of the department never using organic solvent. The concentration of toluene from almost all of the workplace did not exceed the allowable level. There was no statistically significant difference between the concentration of urinary hippuric acid from the workers of the department using organic solvent and that of the department never using it. Total symptom score of the plant never using organic solvents was 9.8 and those of the three plants using organic solvents were 15.6, 14.7, and 13,7 respectively. In order to evaluate the validity of the questionnaires, the workers from two different departments of the plant in which usage of organic solvents are totally dofferemt were compared. The total symptom score was 17.8 for workers of the department using organic solvent and 13.5 for the department never using organic solvent and scores of each symptom group between exposure and non-exposure group also showed statistically significant difference. The finding that total symptom score of the exposure group increased as the duration of employment increased indirectly suggests the usefulness of the developed questionnaire to assess the health effects of chronic exposure to organic solvents. The correlation coefficient, which was calculated to evaluate the test-retest reliability, was 0.581 (p=0.001). The coefficient of Crohnbach which reflects the internal consistency of the questionnaire was 0.91. In conclusion, the reliabilty of the questionnaire was well maintained over the time lapse between the two administrations of the questionnaire and despite the seasonal difference.

• Journal of the Korean Chemical Society
• /
• v.14 no.2
• /
• pp.169-177
• /
• 1970

A study was made on the radioiodination of organic compounds in presence of hydrogen peroxide both in aqueous and organic solvent systems. In case of the reaction of rosebengal, Hippuran, and 5-iodo-uracil the aqueous reaction system could give high labelling yield within a relatively short reaction time. Labelling yield of average 50% could be obtained within 30 minutes of reaction sequence. In cases of organic solvent systems (D.M.S.O., D.M.F., and Dioxane) the solvent system of D.M.S.O. could give better yield for neutral organic compounds, where as D.M.F. and Dioxane gave better labelling result for acidic materials. Especially, o-iodobenzoic acid, o-iodotoluene, and pentachlorophenol could be labelled better in organic solvent system.

• YAKHAK HOEJI
• /
• v.17 no.2
• /
• pp.111-114
• /
• 1973

Je-chun clay, Hwa-soon bentonite, and Hwa-soon montmorillonite were treated with treated with organic solvents, i.e., ethylene glycol, ethanol, n-hexane, dioxane, ethylene chlorohydrin and obtained X-ray diffractograms were compared with those of the original samples. Organic solvent was adsorbed on the basal plane surfaces of Je-chun clay, Hwa-soon bentonite, Hwa-soon montmorillonite and, as a result, the axis spacing ws increased, However, organic solvent did not affect the non-expanding lattice of Japanese acid clay and the basal plane remained unchanged.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.5
• /
• pp.881-888
• /
• 2010

solvent-tolerant bacterium strain, MH6, was isolated by hydrophilic organic solvent DMSO enrichment in the medium and identified as Serratia marcescens. The extracellular protease with novel organic-solvent-stable properties from strain MH6 was purified and characterized. The molecular mass of the purified protease was estimated to be 52 kDa on SDS-PAGE. The open reading frame (ORF) of the MH6 protease encoded 504 amino acids with 471 amino acid residues in the mature protease. Based on the inhibitory effects of EDTA and 1,10-phenathroline, the MH6 protease was characterized as a metalloproteinase. The enzyme activity was increased in the presence of $Ni^{2+}$, $Mg^{2+}$, and $Ca^{2+}$. The protease could also be activated by the nonionic surfactants Tween 80 (1.0%) and Triton X-100 (1.0%). The protease showed remarkable solvent stability in the presence of 50% (v/v) solutions of long-chain alkanes and long-chain alcohols. It was also fairly stable in the presence of 25% solutions of hydrophilic organic solvents. Owing to its high stability in solvents and surfactants, the MH6 protease is an ideal candidate for applications in organic catalysis and other related fields.

• Membrane Journal
• /
• v.31 no.4
• /
• pp.282-292
• /
• 2021

In this work, we tested commercial organic solvent nanofiltration (OSN) membranes using both in-house dead-end and crossflow systems. Four different crosslinked polyimide Duramem (DM) OSN membranes with various MWCO (molecular weight cut off) values were tested in organic solvents such as ethanol, N,N-dimethylformamide, acetone and acetonitrile. The membranes exhibited more reliable and reproducible performance in the crossflow system, and the performance changed significantly depending in the physical properties of the testing solvent. This is due to the initial stabilization period via pressure-induced compaction phenomenon, which can be vastly different between membrane samples. Hence, to obtain reliable and reproducible results, crossflow system is the preferred choice.